2 * Device Tree Source for the Koelsch board
4 * Copyright (C) 2013 Renesas Electronics Corporation
5 * Copyright (C) 2013-2014 Renesas Solutions Corp.
6 * Copyright (C) 2014 Cogent Embedded, Inc.
8 * This file is licensed under the terms of the GNU General Public License
9 * version 2. This program is licensed "as is" without any warranty of any
10 * kind, whether express or implied.
14 #include "r8a7791.dtsi"
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/input.h>
20 compatible = "renesas,koelsch", "renesas,r8a7791";
28 bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
32 device_type = "memory";
33 reg = <0 0x40000000 0 0x40000000>;
37 device_type = "memory";
38 reg = <2 0x00000000 0 0x40000000>;
47 compatible = "gpio-keys";
50 gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
54 debounce-interval = <20>;
57 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
61 debounce-interval = <20>;
64 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
68 debounce-interval = <20>;
71 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
75 debounce-interval = <20>;
78 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
82 debounce-interval = <20>;
85 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
89 debounce-interval = <20>;
92 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
96 debounce-interval = <20>;
99 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
100 linux,code = <KEY_D>;
103 debounce-interval = <20>;
106 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
107 linux,code = <KEY_E>;
110 debounce-interval = <20>;
113 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
114 linux,code = <KEY_F>;
117 debounce-interval = <20>;
120 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
121 linux,code = <KEY_G>;
124 debounce-interval = <20>;
129 compatible = "gpio-leds";
131 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
134 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
137 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
141 vcc_sdhi0: regulator@0 {
142 compatible = "regulator-fixed";
144 regulator-name = "SDHI0 Vcc";
145 regulator-min-microvolt = <3300000>;
146 regulator-max-microvolt = <3300000>;
148 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
152 vccq_sdhi0: regulator@1 {
153 compatible = "regulator-gpio";
155 regulator-name = "SDHI0 VccQ";
156 regulator-min-microvolt = <1800000>;
157 regulator-max-microvolt = <3300000>;
159 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
165 vcc_sdhi1: regulator@2 {
166 compatible = "regulator-fixed";
168 regulator-name = "SDHI1 Vcc";
169 regulator-min-microvolt = <3300000>;
170 regulator-max-microvolt = <3300000>;
172 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
176 vccq_sdhi1: regulator@3 {
177 compatible = "regulator-gpio";
179 regulator-name = "SDHI1 VccQ";
180 regulator-min-microvolt = <1800000>;
181 regulator-max-microvolt = <3300000>;
183 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
189 vcc_sdhi2: regulator@4 {
190 compatible = "regulator-fixed";
192 regulator-name = "SDHI2 Vcc";
193 regulator-min-microvolt = <3300000>;
194 regulator-max-microvolt = <3300000>;
196 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
200 vccq_sdhi2: regulator@5 {
201 compatible = "regulator-gpio";
203 regulator-name = "SDHI2 VccQ";
204 regulator-min-microvolt = <1800000>;
205 regulator-max-microvolt = <3300000>;
207 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
215 clock-frequency = <20000000>;
219 pinctrl-0 = <&du_pins>;
220 pinctrl-names = "default";
223 renesas,groups = "i2c2";
224 renesas,function = "i2c2";
228 renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
229 renesas,function = "du";
232 scif0_pins: serial0 {
233 renesas,groups = "scif0_data_d";
234 renesas,function = "scif0";
237 scif1_pins: serial1 {
238 renesas,groups = "scif1_data_d";
239 renesas,function = "scif1";
243 renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
244 renesas,function = "eth";
248 renesas,groups = "intc_irq0";
249 renesas,function = "intc";
253 renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
254 renesas,function = "sdhi0";
258 renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
259 renesas,function = "sdhi1";
263 renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
264 renesas,function = "sdhi2";
268 renesas,groups = "qspi_ctrl", "qspi_data4";
269 renesas,function = "qspi";
273 renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
275 renesas,function = "msiof0";
279 renesas,groups = "usb0";
280 renesas,function = "usb0";
284 renesas,groups = "usb1";
285 renesas,function = "usb1";
289 renesas,groups = "vin1_data8", "vin1_clk";
290 renesas,function = "vin1";
295 pinctrl-0 = <ðer_pins &phy1_pins>;
296 pinctrl-names = "default";
298 phy-handle = <&phy1>;
299 renesas,ether-link-active-low;
302 phy1: ethernet-phy@1 {
304 interrupt-parent = <&irqc0>;
305 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
306 micrel,led-mode = <1>;
315 pinctrl-0 = <&scif0_pins>;
316 pinctrl-names = "default";
322 pinctrl-0 = <&scif1_pins>;
323 pinctrl-names = "default";
329 pinctrl-0 = <&sdhi0_pins>;
330 pinctrl-names = "default";
332 vmmc-supply = <&vcc_sdhi0>;
333 vqmmc-supply = <&vccq_sdhi0>;
334 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
335 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
340 pinctrl-0 = <&sdhi1_pins>;
341 pinctrl-names = "default";
343 vmmc-supply = <&vcc_sdhi1>;
344 vqmmc-supply = <&vccq_sdhi1>;
345 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
346 wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
351 pinctrl-0 = <&sdhi2_pins>;
352 pinctrl-names = "default";
354 vmmc-supply = <&vcc_sdhi2>;
355 vqmmc-supply = <&vccq_sdhi2>;
356 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
361 pinctrl-0 = <&qspi_pins>;
362 pinctrl-names = "default";
367 #address-cells = <1>;
369 compatible = "spansion,s25fl512s";
371 spi-max-frequency = <30000000>;
372 spi-tx-bus-width = <4>;
373 spi-rx-bus-width = <4>;
378 reg = <0x00000000 0x00080000>;
383 reg = <0x00080000 0x00080000>;
388 reg = <0x00100000 0x03f00000>;
394 pinctrl-0 = <&msiof0_pins>;
395 pinctrl-names = "default";
400 compatible = "renesas,r2a11302ft";
402 spi-max-frequency = <6000000>;
409 pinctrl-0 = <&i2c2_pins>;
410 pinctrl-names = "default";
413 clock-frequency = <400000>;
416 compatible = "adi,adv7180";
423 remote-endpoint = <&vin1ep>;
429 compatible = "renesas,24c02";
437 clock-frequency = <100000>;
439 vdd_dvfs: regulator@68 {
440 compatible = "dlg,da9210";
443 regulator-min-microvolt = <1000000>;
444 regulator-max-microvolt = <1000000>;
452 pinctrl-0 = <&usb0_pins>;
453 pinctrl-names = "default";
458 pinctrl-0 = <&usb1_pins>;
459 pinctrl-names = "default";
471 cpu0-supply = <&vdd_dvfs>;
474 /* composite video input */
477 pinctrl-0 = <&vin1_pins>;
478 pinctrl-names = "default";
481 #address-cells = <1>;
485 remote-endpoint = <&adv7180>;