2 * DTS file for all SPEAr1310 SoCs
4 * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
6 * The code contained herein is licensed under the GNU General Public
7 * License. You may obtain a copy of the GNU General Public License
8 * Version 2 or later at the following locations:
10 * http://www.opensource.org/licenses/gpl-license.html
11 * http://www.gnu.org/copyleft/gpl.html
14 /include/ "spear13xx.dtsi"
17 compatible = "st,spear1310";
21 compatible = "snps,spear-ahci";
22 reg = <0xb1000000 0x10000>;
23 interrupts = <0 68 0x4>;
28 compatible = "snps,spear-ahci";
29 reg = <0xb1800000 0x10000>;
30 interrupts = <0 69 0x4>;
35 compatible = "snps,spear-ahci";
36 reg = <0xb4000000 0x10000>;
37 interrupts = <0 70 0x4>;
42 compatible = "st,spear600-gmac";
43 reg = <0x5c400000 0x8000>;
44 interrupts = <0 95 0x4>;
45 interrupt-names = "macirq";
50 compatible = "st,spear600-gmac";
51 reg = <0x5c500000 0x8000>;
52 interrupts = <0 96 0x4>;
53 interrupt-names = "macirq";
58 compatible = "st,spear600-gmac";
59 reg = <0x5c600000 0x8000>;
60 interrupts = <0 97 0x4>;
61 interrupt-names = "macirq";
66 compatible = "st,spear600-gmac";
67 reg = <0x5c700000 0x8000>;
68 interrupts = <0 98 0x4>;
69 interrupt-names = "macirq";
73 pinmux: pinmux@e0700000 {
74 compatible = "st,spear1310-pinmux";
75 reg = <0xe0700000 0x1000>;
76 #gpio-range-cells = <2>;
80 compatible = "arm,pl022", "arm,primecell";
81 reg = <0x5d400000 0x1000>;
82 interrupts = <0 99 0x4>;
90 compatible = "snps,designware-i2c";
91 reg = <0x5cd00000 0x1000>;
92 interrupts = <0 87 0x4>;
99 compatible = "snps,designware-i2c";
100 reg = <0x5ce00000 0x1000>;
101 interrupts = <0 88 0x4>;
106 #address-cells = <1>;
108 compatible = "snps,designware-i2c";
109 reg = <0x5cf00000 0x1000>;
110 interrupts = <0 89 0x4>;
115 #address-cells = <1>;
117 compatible = "snps,designware-i2c";
118 reg = <0x5d000000 0x1000>;
119 interrupts = <0 90 0x4>;
124 #address-cells = <1>;
126 compatible = "snps,designware-i2c";
127 reg = <0x5d100000 0x1000>;
128 interrupts = <0 91 0x4>;
133 #address-cells = <1>;
135 compatible = "snps,designware-i2c";
136 reg = <0x5d200000 0x1000>;
137 interrupts = <0 92 0x4>;
142 #address-cells = <1>;
144 compatible = "snps,designware-i2c";
145 reg = <0x5d300000 0x1000>;
146 interrupts = <0 93 0x4>;
151 compatible = "arm,pl011", "arm,primecell";
152 reg = <0x5c800000 0x1000>;
153 interrupts = <0 82 0x4>;
158 compatible = "arm,pl011", "arm,primecell";
159 reg = <0x5c900000 0x1000>;
160 interrupts = <0 83 0x4>;
165 compatible = "arm,pl011", "arm,primecell";
166 reg = <0x5ca00000 0x1000>;
167 interrupts = <0 84 0x4>;
172 compatible = "arm,pl011", "arm,primecell";
173 reg = <0x5cb00000 0x1000>;
174 interrupts = <0 85 0x4>;
179 compatible = "arm,pl011", "arm,primecell";
180 reg = <0x5cc00000 0x1000>;
181 interrupts = <0 86 0x4>;
186 st,thermal-flags = <0x7000>;
189 gpiopinctrl: gpio@d8400000 {
190 compatible = "st,spear-plgpio";
191 reg = <0xd8400000 0x1000>;
192 interrupts = <0 100 0x4>;
193 #interrupt-cells = <1>;
194 interrupt-controller;
197 gpio-ranges = <&pinmux 0 246>;
200 st-plgpio,ngpio = <246>;
201 st-plgpio,enb-reg = <0xd0>;
202 st-plgpio,wdata-reg = <0x90>;
203 st-plgpio,dir-reg = <0xb0>;
204 st-plgpio,ie-reg = <0x30>;
205 st-plgpio,rdata-reg = <0x70>;
206 st-plgpio,mis-reg = <0x10>;
207 st-plgpio,eit-reg = <0x50>;