arch/arm/boot/dts/spear300.dtsi

   1 /*
   2  * DTS file for SPEAr300 SoC
   3  *
   4  * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 /include/ "spear3xx.dtsi"
  15
  16 / {
  17         ahb {
  18                 #address-cells = <1>;
  19                 #size-cells = <1>;
  20                 compatible = "simple-bus";
  21                 ranges = <0x60000000 0x60000000 0x50000000
  22                           0xd0000000 0xd0000000 0x30000000>;
  23
  24                 pinmux@99000000 {
  25                         compatible = "st,spear300-pinmux";
  26                         reg = <0x99000000 0x1000>;
  27                 };
  28
  29                 clcd@60000000 {
  30                         compatible = "arm,pl110", "arm,primecell";
  31                         reg = <0x60000000 0x1000>;
  32                         interrupts = <30>;
  33                         status = "disabled";
  34                 };
  35
  36                 fsmc: flash@94000000 {
  37                         compatible = "st,spear600-fsmc-nand";
  38                         #address-cells = <1>;
  39                         #size-cells = <1>;
  40                         reg = <0x94000000 0x1000        /* FSMC Register */
  41                                0x80000000 0x0010        /* NAND Base DATA */
  42                                0x80020000 0x0010        /* NAND Base ADDR */
  43                                0x80010000 0x0010>;      /* NAND Base CMD */
  44                         reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
  45                         status = "disabled";
  46                 };
  47
  48                 sdhci@70000000 {
  49                         compatible = "st,sdhci-spear";
  50                         reg = <0x70000000 0x100>;
  51                         interrupts = <1>;
  52                         status = "disabled";
  53                 };
  54
  55                 shirq: interrupt-controller@0x50000000 {
  56                         compatible = "st,spear300-shirq";
  57                         reg = <0x50000000 0x1000>;
  58                         interrupts = <28>;
  59                         #interrupt-cells = <1>;
  60                         interrupt-controller;
  61                 };
  62
  63                 apb {
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66                         compatible = "simple-bus";
  67                         ranges = <0xa0000000 0xa0000000 0x10000000
  68                                   0xd0000000 0xd0000000 0x30000000>;
  69
  70                         gpio1: gpio@a9000000 {
  71                                 #gpio-cells = <2>;
  72                                 compatible = "arm,pl061", "arm,primecell";
  73                                 gpio-controller;
  74                                 reg = <0xa9000000 0x1000>;
  75                                 interrupts = <8>;
  76                                 interrupt-parent = <&shirq>;
  77                                 status = "disabled";
  78                         };
  79
  80                         kbd@a0000000 {
  81                                 compatible = "st,spear300-kbd";
  82                                 reg = <0xa0000000 0x1000>;
  83                                 interrupts = <7>;
  84                                 interrupt-parent = <&shirq>;
  85                                 status = "disabled";
  86                         };
  87                 };
  88         };
  89 };