ARM: SPEAr: Add plgpio node in device tree dtsi files
[deliverable/linux.git] / arch / arm / boot / dts / spear320-evb.dts
1 /*
2 * DTS file for SPEAr320 Evaluation Baord
3 *
4 * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
5 *
6 * The code contained herein is licensed under the GNU General Public
7 * License. You may obtain a copy of the GNU General Public License
8 * Version 2 or later at the following locations:
9 *
10 * http://www.opensource.org/licenses/gpl-license.html
11 * http://www.gnu.org/copyleft/gpl.html
12 */
13
14 /dts-v1/;
15 /include/ "spear320.dtsi"
16
17 / {
18 model = "ST SPEAr320 Evaluation Board";
19 compatible = "st,spear320-evb", "st,spear320";
20 #address-cells = <1>;
21 #size-cells = <1>;
22
23 memory {
24 reg = <0 0x40000000>;
25 };
26
27 ahb {
28 pinmux@b3000000 {
29 st,pinmux-mode = <4>;
30 pinctrl-names = "default";
31 pinctrl-0 = <&state_default>;
32
33 state_default: pinmux {
34 i2c0 {
35 st,pins = "i2c0_grp";
36 st,function = "i2c0";
37 };
38 mii0 {
39 st,pins = "mii0_grp";
40 st,function = "mii0";
41 };
42 ssp0 {
43 st,pins = "ssp0_grp";
44 st,function = "ssp0";
45 };
46 uart0 {
47 st,pins = "uart0_grp";
48 st,function = "uart0";
49 };
50 sdhci {
51 st,pins = "sdhci_cd_51_grp";
52 st,function = "sdhci";
53 };
54 i2s {
55 st,pins = "i2s_grp";
56 st,function = "i2s";
57 };
58 uart1 {
59 st,pins = "uart1_grp";
60 st,function = "uart1";
61 };
62 uart2 {
63 st,pins = "uart2_grp";
64 st,function = "uart2";
65 };
66 can0 {
67 st,pins = "can0_grp";
68 st,function = "can0";
69 };
70 can1 {
71 st,pins = "can1_grp";
72 st,function = "can1";
73 };
74 mii2 {
75 st,pins = "mii2_grp";
76 st,function = "mii2";
77 };
78 pwm0_1 {
79 st,pins = "pwm0_1_pin_14_15_grp";
80 st,function = "pwm0_1";
81 };
82 pwm2 {
83 st,pins = "pwm2_pin_13_grp";
84 st,function = "pwm2";
85 };
86 };
87 };
88
89 clcd@90000000 {
90 status = "okay";
91 };
92
93 dma@fc400000 {
94 status = "okay";
95 };
96
97 fsmc: flash@4c000000 {
98 status = "okay";
99 };
100
101 gmac: eth@e0800000 {
102 status = "okay";
103 };
104
105 sdhci@70000000 {
106 status = "okay";
107 };
108
109 smi: flash@fc000000 {
110 status = "okay";
111 clock-rate=<50000000>;
112
113 flash@f8000000 {
114 #address-cells = <1>;
115 #size-cells = <1>;
116 reg = <0xf8000000 0x800000>;
117 st,smi-fast-mode;
118
119 partition@0 {
120 label = "xloader";
121 reg = <0x0 0x10000>;
122 };
123 partition@10000 {
124 label = "u-boot";
125 reg = <0x10000 0x40000>;
126 };
127 partition@50000 {
128 label = "linux";
129 reg = <0x50000 0x2c0000>;
130 };
131 partition@310000 {
132 label = "rootfs";
133 reg = <0x310000 0x4f0000>;
134 };
135 };
136 };
137
138 spi0: spi@d0100000 {
139 status = "okay";
140 };
141
142 spi1: spi@a5000000 {
143 status = "okay";
144 };
145
146 spi2: spi@a6000000 {
147 status = "okay";
148 };
149
150 ehci@e1800000 {
151 status = "okay";
152 };
153
154 ohci@e1900000 {
155 status = "okay";
156 };
157
158 ohci@e2100000 {
159 status = "okay";
160 };
161
162 apb {
163 gpio0: gpio@fc980000 {
164 status = "okay";
165 };
166
167 gpio@b3000000 {
168 status = "okay";
169 };
170
171 i2c0: i2c@d0180000 {
172 status = "okay";
173 };
174
175 i2c1: i2c@a7000000 {
176 status = "okay";
177 };
178
179 rtc@fc900000 {
180 status = "okay";
181 };
182
183 serial@d0000000 {
184 status = "okay";
185 };
186
187 serial@a3000000 {
188 status = "okay";
189 };
190
191 serial@a4000000 {
192 status = "okay";
193 };
194
195 wdt@fc880000 {
196 status = "okay";
197 };
198 };
199 };
200 };
This page took 0.036437 seconds and 5 git commands to generate.