arch/arm/boot/dts/sun5i-a10s-mk802.dts

   1 /*
   2  * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 /dts-v1/;
  44 #include "sun5i-a10s.dtsi"
  45 #include "sunxi-common-regulators.dtsi"
  46 #include <dt-bindings/gpio/gpio.h>
  47
  48 / {
  49         model = "MK802-A10s";
  50         compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
  51
  52         aliases {
  53                 serial0 = &uart0;
  54         };
  55
  56         chosen {
  57                 stdout-path = "serial0:115200n8";
  58         };
  59
  60         leds {
  61                 compatible = "gpio-leds";
  62                 pinctrl-names = "default";
  63                 pinctrl-0 = <&led_pins_mk802>;
  64
  65                 red {
  66                         label = "mk802:red:usr";
  67                         gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
  68                 };
  69         };
  70 };
  71
  72 &ehci0 {
  73         status = "okay";
  74 };
  75
  76 &mmc0 {
  77         pinctrl-names = "default";
  78         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
  79         vmmc-supply = <&reg_vcc3v3>;
  80         bus-width = <4>;
  81         cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
  82         cd-inverted;
  83         status = "okay";
  84 };
  85
  86 &ohci0 {
  87         status = "okay";
  88 };
  89
  90 &pio {
  91         led_pins_mk802: led_pins@0 {
  92                 allwinner,pins = "PB2";
  93                 allwinner,function = "gpio_out";
  94                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
  95                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
  96         };
  97
  98         mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
  99                 allwinner,pins = "PG1";
 100                 allwinner,function = "gpio_in";
 101                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 102                 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 103         };
 104
 105         usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
 106                 allwinner,pins = "PB10";
 107                 allwinner,function = "gpio_out";
 108                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 109                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 110         };
 111 };
 112
 113 &reg_usb1_vbus {
 114         pinctrl-0 = <&usb1_vbus_pin_mk802>;
 115         gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
 116         status = "okay";
 117 };
 118
 119 &uart0 {
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&uart0_pins_a>;
 122         status = "okay";
 123 };
 124
 125 &usbphy {
 126         usb1_vbus-supply = <&reg_usb1_vbus>;
 127         status = "okay";
 128 };