Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
[deliverable/linux.git] / arch / arm / boot / dts / sun6i-a31s-sina31s-core.dtsi
1 /*
2 * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43 /dts-v1/;
44 #include "sun6i-a31s.dtsi"
45 #include "sunxi-common-regulators.dtsi"
46
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/pinctrl/sun4i-a10.h>
49
50 / {
51 model = "Sinlinx SinA31s Core Board";
52 compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
53
54 aliases {
55 serial0 = &uart0;
56 };
57 };
58
59 &cpu0 {
60 cpu-supply = <&reg_dcdc3>;
61 };
62
63 /* eMMC on core board */
64 &mmc3 {
65 pinctrl-names = "default";
66 pinctrl-0 = <&mmc3_8bit_emmc_pins>;
67 vmmc-supply = <&reg_dcdc1>;
68 vqmmc-supply = <&reg_dcdc1>;
69 bus-width = <8>;
70 non-removable;
71 cap-mmc-hw-reset;
72 status = "okay";
73 };
74
75 /* AXP221s PMIC on core board */
76 &p2wi {
77 status = "okay";
78
79 axp22x: pmic@68 {
80 compatible = "x-powers,axp221";
81 reg = <0x68>;
82 interrupt-parent = <&nmi_intc>;
83 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
84 };
85 };
86
87 #include "axp22x.dtsi"
88
89 &reg_aldo3 {
90 regulator-always-on;
91 regulator-min-microvolt = <2700000>;
92 regulator-max-microvolt = <3300000>;
93 regulator-name = "avcc";
94 };
95
96 &reg_dc5ldo {
97 regulator-min-microvolt = <700000>;
98 regulator-max-microvolt = <1320000>;
99 regulator-name = "vdd-cpus";
100 };
101
102 &reg_dcdc1 {
103 regulator-always-on;
104 regulator-min-microvolt = <3000000>;
105 regulator-max-microvolt = <3000000>;
106 regulator-name = "vcc-3v0";
107 };
108
109 &reg_dcdc2 {
110 regulator-min-microvolt = <700000>;
111 regulator-max-microvolt = <1320000>;
112 regulator-name = "vdd-gpu";
113 };
114
115 &reg_dcdc3 {
116 regulator-always-on;
117 regulator-min-microvolt = <700000>;
118 regulator-max-microvolt = <1320000>;
119 regulator-name = "vdd-cpu";
120 };
121
122 &reg_dcdc4 {
123 regulator-always-on;
124 regulator-min-microvolt = <700000>;
125 regulator-max-microvolt = <1320000>;
126 regulator-name = "vdd-sys-dll";
127 };
128
129 &reg_dcdc5 {
130 regulator-always-on;
131 regulator-min-microvolt = <1500000>;
132 regulator-max-microvolt = <1500000>;
133 regulator-name = "vcc-dram";
134 };
135
136 /* UART0 pads available on core board */
137 &uart0 {
138 pinctrl-names = "default";
139 pinctrl-0 = <&uart0_pins_a>;
140 status = "okay";
141 };
142
This page took 0.041076 seconds and 5 git commands to generate.