arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts

   1 /*
   2  * Copyright 2015 Chen-Yu Tsai
   3  *
   4  * Chen-Yu Tsai <wens@csie.org>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  * Or, alternatively,
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use,
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  */
  44
  45 /dts-v1/;
  46 #include "sun8i-a33.dtsi"
  47 #include "sunxi-common-regulators.dtsi"
  48
  49 #include <dt-bindings/gpio/gpio.h>
  50 #include <dt-bindings/input/input.h>
  51 #include <dt-bindings/pinctrl/sun4i-a10.h>
  52
  53 / {
  54         model = "Sinlinx SinA33";
  55         compatible = "sinlinx,sina33", "allwinner,sun8i-a33";
  56
  57         aliases {
  58                 serial0 = &uart0;
  59         };
  60
  61         chosen {
  62                 stdout-path = "serial0:115200n8";
  63         };
  64 };
  65
  66 &lradc {
  67         vref-supply = <&reg_vcc3v0>;
  68         status = "okay";
  69
  70         button@200 {
  71                 label = "Volume Up";
  72                 linux,code = <KEY_VOLUMEUP>;
  73                 channel = <0>;
  74                 voltage = <191011>;
  75         };
  76
  77         button@400 {
  78                 label = "Volume Down";
  79                 linux,code = <KEY_VOLUMEDOWN>;
  80                 channel = <0>;
  81                 voltage = <391304>;
  82         };
  83
  84         button@600 {
  85                 label = "Home";
  86                 linux,code = <KEY_HOME>;
  87                 channel = <0>;
  88                 voltage = <600000>;
  89         };
  90 };
  91
  92 &mmc0 {
  93         pinctrl-names = "default";
  94         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
  95         vmmc-supply = <&reg_vcc3v0>;
  96         bus-width = <4>;
  97         cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
  98         cd-inverted;
  99         status = "okay";
 100 };
 101
 102 &mmc2 {
 103         pinctrl-names = "default";
 104         pinctrl-0 = <&mmc2_8bit_pins>;
 105         vmmc-supply = <&reg_vcc3v0>;
 106         bus-width = <8>;
 107         non-removable;
 108         status = "okay";
 109 };
 110
 111 &mmc2_8bit_pins {
 112         /* eMMC is missing pull-ups */
 113         allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 114 };
 115
 116 &pio {
 117         mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
 118                 allwinner,pins = "PB4";
 119                 allwinner,function = "gpio_in";
 120                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 121                 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 122         };
 123 };
 124
 125 &uart0 {
 126         pinctrl-names = "default";
 127         pinctrl-0 = <&uart0_pins_b>;
 128         status = "okay";
 129 };