arch/arm/boot/dts/tango4-common.dtsi

   1 /*
   2  * Based on Mans Rullgard's Tango3 DT
   3  * https://github.com/mansr/linux-tangox
   4  */
   5
   6 #define CPU_CLK 0
   7 #define SYS_CLK 1
   8
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10
  11 / {
  12         interrupt-parent = <&gic>;
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15
  16         periph_clk: periph_clk {
  17                 compatible = "fixed-factor-clock";
  18                 clocks = <&clkgen CPU_CLK>;
  19                 clock-mult = <1>;
  20                 clock-div  = <2>;
  21                 #clock-cells = <0>;
  22         };
  23
  24         mpcore {
  25                 compatible = "simple-bus";
  26                 ranges = <0x00000000 0x20000000 0x2000>;
  27                 #address-cells = <1>;
  28                 #size-cells = <1>;
  29
  30                 scu@0 {
  31                         compatible = "arm,cortex-a9-scu";
  32                         reg = <0x0 0x100>;
  33                 };
  34
  35                 twd@600 {
  36                         compatible = "arm,cortex-a9-twd-timer";
  37                         reg = <0x600 0x10>;
  38                         interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
  39                         clocks = <&periph_clk>;
  40                         always-on;
  41                 };
  42
  43                 gic: interrupt-controller@1000 {
  44                         compatible = "arm,cortex-a9-gic";
  45                         #interrupt-cells = <3>;
  46                         interrupt-controller;
  47                         reg = <0x1000 0x1000>, <0x100 0x100>;
  48                 };
  49         };
  50
  51         l2cc: l2-cache-controller@20100000 {
  52                 compatible = "arm,pl310-cache";
  53                 reg = <0x20100000 0x1000>;
  54                 cache-level = <2>;
  55                 cache-unified;
  56         };
  57
  58         soc {
  59                 compatible = "simple-bus";
  60                 interrupt-parent = <&irq0>;
  61                 #address-cells = <1>;
  62                 #size-cells = <1>;
  63                 ranges;
  64
  65                 xtal: xtal {
  66                         compatible = "fixed-clock";
  67                         clock-frequency = <27000000>;
  68                         #clock-cells = <0>;
  69                 };
  70
  71                 clkgen: clkgen@10000 {
  72                         compatible = "sigma,tango4-clkgen";
  73                         reg = <0x10000 0x40>;
  74                         clocks = <&xtal>;
  75                         #clock-cells = <1>;
  76                 };
  77
  78                 tick-counter@10048 {
  79                         compatible = "sigma,tick-counter";
  80                         reg = <0x10048 0x4>;
  81                         clocks = <&xtal>;
  82                 };
  83
  84                 uart: serial@10700 {
  85                         compatible = "ralink,rt2880-uart";
  86                         reg = <0x10700 0x30>;
  87                         interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
  88                         clock-frequency = <7372800>;
  89                         reg-shift = <2>;
  90                 };
  91
  92                 eth0: ethernet@26000 {
  93                         compatible = "sigma,smp8734-ethernet";
  94                         reg = <0x26000 0x800>;
  95                         interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
  96                         clocks = <&clkgen SYS_CLK>;
  97                 };
  98
  99                 intc: interrupt-controller@6e000 {
 100                         compatible = "sigma,smp8642-intc";
 101                         reg = <0x6e000 0x400>;
 102                         ranges = <0 0x6e000 0x400>;
 103                         interrupt-parent = <&gic>;
 104                         interrupt-controller;
 105                         #address-cells = <1>;
 106                         #size-cells = <1>;
 107
 108                         irq0: irq0@000 {
 109                                 reg = <0x000 0x100>;
 110                                 interrupt-controller;
 111                                 #interrupt-cells = <2>;
 112                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 113                         };
 114
 115                         irq1: irq1@100 {
 116                                 reg = <0x100 0x100>;
 117                                 interrupt-controller;
 118                                 #interrupt-cells = <2>;
 119                                 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 120                         };
 121
 122                         irq2: irq2@300 {
 123                                 reg = <0x300 0x100>;
 124                                 interrupt-controller;
 125                                 #interrupt-cells = <2>;
 126                                 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 127                         };
 128                 };
 129         };
 130 };