ARM: mvebu: add crypto related nodes to armada-xp.dtsi
[deliverable/linux.git] / arch / arm / boot / dts / tegra20-tec.dts
1 /dts-v1/;
2
3 #include "tegra20-tamonten.dtsi"
4
5 / {
6 model = "Avionic Design Tamonten Evaluation Carrier";
7 compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
8
9 host1x@50000000 {
10 hdmi@54280000 {
11 status = "okay";
12 };
13 };
14
15 i2c@7000c000 {
16 wm8903: wm8903@1a {
17 compatible = "wlf,wm8903";
18 reg = <0x1a>;
19 interrupt-parent = <&gpio>;
20 interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
21
22 gpio-controller;
23 #gpio-cells = <2>;
24
25 micdet-cfg = <0>;
26 micdet-delay = <100>;
27 gpio-cfg = <0xffffffff
28 0xffffffff
29 0
30 0xffffffff
31 0xffffffff>;
32 };
33 };
34
35 pcie-controller@80003000 {
36 status = "okay";
37
38 pci@1,0 {
39 status = "okay";
40 };
41 };
42
43 sound {
44 compatible = "ad,tegra-audio-wm8903-tec",
45 "nvidia,tegra-audio-wm8903";
46 nvidia,model = "Avionic Design TEC";
47
48 nvidia,audio-routing =
49 "Headphone Jack", "HPOUTR",
50 "Headphone Jack", "HPOUTL",
51 "Int Spk", "ROP",
52 "Int Spk", "RON",
53 "Int Spk", "LOP",
54 "Int Spk", "LON",
55 "Mic Jack", "MICBIAS",
56 "IN1L", "Mic Jack";
57
58 nvidia,i2s-controller = <&tegra_i2s1>;
59 nvidia,audio-codec = <&wm8903>;
60
61 nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
62 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
63 GPIO_ACTIVE_HIGH>;
64
65 clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
66 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
67 <&tegra_car TEGRA20_CLK_CDEV1>;
68 clock-names = "pll_a", "pll_a_out0", "mclk";
69 };
70
71 regulators {
72 vcc_24v_reg: regulator@100 {
73 compatible = "regulator-fixed";
74 reg = <100>;
75 regulator-name = "vcc_24v";
76 regulator-min-microvolt = <24000000>;
77 regulator-max-microvolt = <24000000>;
78 regulator-always-on;
79 };
80
81 vdd_5v0_reg: regulator@101 {
82 compatible = "regulator-fixed";
83 reg = <101>;
84 regulator-name = "vdd_5v0";
85 vin-supply = <&vcc_24v_reg>;
86 regulator-min-microvolt = <5000000>;
87 regulator-max-microvolt = <5000000>;
88 regulator-always-on;
89 };
90
91 vdd_3v3_reg: regulator@102 {
92 compatible = "regulator-fixed";
93 reg = <102>;
94 regulator-name = "vdd_3v3";
95 vin-supply = <&vcc_24v_reg>;
96 regulator-min-microvolt = <3300000>;
97 regulator-max-microvolt = <3300000>;
98 regulator-always-on;
99 };
100
101 vdd_1v8_reg: regulator@103 {
102 compatible = "regulator-fixed";
103 reg = <103>;
104 regulator-name = "vdd_1v8";
105 vin-supply = <&vdd_3v3_reg>;
106 regulator-min-microvolt = <1800000>;
107 regulator-max-microvolt = <1800000>;
108 regulator-always-on;
109 };
110 };
111 };
This page took 0.032194 seconds and 5 git commands to generate.