arch/arm/boot/dts/tegra30-cardhu.dtsi

   1 #include <dt-bindings/input/input.h>
   2 #include "tegra30.dtsi"
   3
   4 /**
   5  * This file contains common DT entry for all fab version of Cardhu.
   6  * There is multiple fab version of Cardhu starting from A01 to A07.
   7  * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
   8  * A02 will have different sets of GPIOs for fixed regulator compare to
   9  * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
  10  * compatible with fab version A04. Based on Cardhu fab version, the
  11  * related dts file need to be chosen like for Cardhu fab version A02,
  12  * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
  13  * tegra30-cardhu-a04.dts.
  14  * The identification of board is done in two ways, by looking the sticker
  15  * on PCB and by reading board id eeprom.
  16  * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
  17  * number is the fab version like here it is 002 and hence fab version A02.
  18  * The (downstream internal) U-Boot of Cardhu display the board-id as
  19  * follows:
  20  * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
  21  * In this Fab version is 02 i.e. A02.
  22  * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
  23  * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
  24  * wide.
  25  */
  26
  27 / {
  28         model = "NVIDIA Tegra30 Cardhu evaluation board";
  29         compatible = "nvidia,cardhu", "nvidia,tegra30";
  30
  31         aliases {
  32                 rtc0 = "/i2c@7000d000/tps65911@2d";
  33                 rtc1 = "/rtc@7000e000";
  34                 serial0 = &uarta;
  35                 serial1 = &uartc;
  36         };
  37
  38         chosen {
  39                 stdout-path = "serial0:115200n8";
  40         };
  41
  42         memory {
  43                 reg = <0x80000000 0x40000000>;
  44         };
  45
  46         pcie-controller@00003000 {
  47                 status = "okay";
  48
  49                 /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
  50                 avdd-pexb-supply = <&ldo1_reg>;
  51                 vdd-pexb-supply = <&ldo1_reg>;
  52                 avdd-pex-pll-supply = <&ldo1_reg>;
  53                 hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
  54                 vddio-pex-ctl-supply = <&sys_3v3_reg>;
  55                 avdd-plle-supply = <&ldo2_reg>;
  56
  57                 pci@1,0 {
  58                         nvidia,num-lanes = <4>;
  59                 };
  60
  61                 pci@2,0 {
  62                         nvidia,num-lanes = <1>;
  63                 };
  64
  65                 pci@3,0 {
  66                         status = "okay";
  67                         nvidia,num-lanes = <1>;
  68                 };
  69         };
  70
  71         host1x@50000000 {
  72                 dc@54200000 {
  73                         rgb {
  74                                 status = "okay";
  75
  76                                 nvidia,panel = <&panel>;
  77                         };
  78                 };
  79         };
  80
  81         pinmux@70000868 {
  82                 pinctrl-names = "default";
  83                 pinctrl-0 = <&state_default>;
  84
  85                 state_default: pinmux {
  86                         sdmmc1_clk_pz0 {
  87                                 nvidia,pins = "sdmmc1_clk_pz0";
  88                                 nvidia,function = "sdmmc1";
  89                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
  90                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
  91                         };
  92                         sdmmc1_cmd_pz1 {
  93                                 nvidia,pins =   "sdmmc1_cmd_pz1",
  94                                                 "sdmmc1_dat0_py7",
  95                                                 "sdmmc1_dat1_py6",
  96                                                 "sdmmc1_dat2_py5",
  97                                                 "sdmmc1_dat3_py4";
  98                                 nvidia,function = "sdmmc1";
  99                                 nvidia,pull = <TEGRA_PIN_PULL_UP>;
 100                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 101                         };
 102                         sdmmc3_clk_pa6 {
 103                                 nvidia,pins = "sdmmc3_clk_pa6";
 104                                 nvidia,function = "sdmmc3";
 105                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 106                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 107                         };
 108                         sdmmc3_cmd_pa7 {
 109                                 nvidia,pins =   "sdmmc3_cmd_pa7",
 110                                                 "sdmmc3_dat0_pb7",
 111                                                 "sdmmc3_dat1_pb6",
 112                                                 "sdmmc3_dat2_pb5",
 113                                                 "sdmmc3_dat3_pb4";
 114                                 nvidia,function = "sdmmc3";
 115                                 nvidia,pull = <TEGRA_PIN_PULL_UP>;
 116                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 117                         };
 118                         sdmmc4_clk_pcc4 {
 119                                 nvidia,pins =   "sdmmc4_clk_pcc4",
 120                                                 "sdmmc4_rst_n_pcc3";
 121                                 nvidia,function = "sdmmc4";
 122                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 123                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 124                         };
 125                         sdmmc4_dat0_paa0 {
 126                                 nvidia,pins =   "sdmmc4_dat0_paa0",
 127                                                 "sdmmc4_dat1_paa1",
 128                                                 "sdmmc4_dat2_paa2",
 129                                                 "sdmmc4_dat3_paa3",
 130                                                 "sdmmc4_dat4_paa4",
 131                                                 "sdmmc4_dat5_paa5",
 132                                                 "sdmmc4_dat6_paa6",
 133                                                 "sdmmc4_dat7_paa7";
 134                                 nvidia,function = "sdmmc4";
 135                                 nvidia,pull = <TEGRA_PIN_PULL_UP>;
 136                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 137                         };
 138                         dap2_fs_pa2 {
 139                                 nvidia,pins =   "dap2_fs_pa2",
 140                                                 "dap2_sclk_pa3",
 141                                                 "dap2_din_pa4",
 142                                                 "dap2_dout_pa5";
 143                                 nvidia,function = "i2s1";
 144                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 145                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 146                         };
 147                         sdio3 {
 148                                 nvidia,pins = "drive_sdio3";
 149                                 nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
 150                                 nvidia,schmitt = <TEGRA_PIN_DISABLE>;
 151                                 nvidia,pull-down-strength = <46>;
 152                                 nvidia,pull-up-strength = <42>;
 153                                 nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
 154                                 nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
 155                         };
 156                         uart3_txd_pw6 {
 157                                 nvidia,pins =   "uart3_txd_pw6",
 158                                                 "uart3_cts_n_pa1",
 159                                                 "uart3_rts_n_pc0",
 160                                                 "uart3_rxd_pw7";
 161                                 nvidia,function = "uartc";
 162                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 163                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 164                         };
 165                 };
 166         };
 167
 168         serial@70006000 {
 169                 status = "okay";
 170         };
 171
 172         serial@70006200 {
 173                 compatible = "nvidia,tegra30-hsuart";
 174                 status = "okay";
 175         };
 176
 177         pwm@7000a000 {
 178                 status = "okay";
 179         };
 180
 181         panelddc: i2c@7000c000 {
 182                 status = "okay";
 183                 clock-frequency = <100000>;
 184         };
 185
 186         i2c@7000c400 {
 187                 status = "okay";
 188                 clock-frequency = <100000>;
 189         };
 190
 191         i2c@7000c500 {
 192                 status = "okay";
 193                 clock-frequency = <100000>;
 194
 195                 /* ALS and Proximity sensor */
 196                 isl29028@44 {
 197                         compatible = "isil,isl29028";
 198                         reg = <0x44>;
 199                         interrupt-parent = <&gpio>;
 200                         interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
 201                 };
 202
 203                 i2cmux@70 {
 204                         compatible = "nxp,pca9546";
 205                         #address-cells = <1>;
 206                         #size-cells = <0>;
 207                         reg = <0x70>;
 208                 };
 209         };
 210
 211         i2c@7000c700 {
 212                 status = "okay";
 213                 clock-frequency = <100000>;
 214         };
 215
 216         i2c@7000d000 {
 217                 status = "okay";
 218                 clock-frequency = <100000>;
 219
 220                 wm8903: wm8903@1a {
 221                         compatible = "wlf,wm8903";
 222                         reg = <0x1a>;
 223                         interrupt-parent = <&gpio>;
 224                         interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 225
 226                         gpio-controller;
 227                         #gpio-cells = <2>;
 228
 229                         micdet-cfg = <0>;
 230                         micdet-delay = <100>;
 231                         gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
 232                 };
 233
 234                 pmic: tps65911@2d {
 235                         compatible = "ti,tps65911";
 236                         reg = <0x2d>;
 237
 238                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 239                         #interrupt-cells = <2>;
 240                         interrupt-controller;
 241
 242                         ti,system-power-controller;
 243
 244                         #gpio-cells = <2>;
 245                         gpio-controller;
 246
 247                         vcc1-supply = <&vdd_ac_bat_reg>;
 248                         vcc2-supply = <&vdd_ac_bat_reg>;
 249                         vcc3-supply = <&vio_reg>;
 250                         vcc4-supply = <&vdd_5v0_reg>;
 251                         vcc5-supply = <&vdd_ac_bat_reg>;
 252                         vcc6-supply = <&vdd2_reg>;
 253                         vcc7-supply = <&vdd_ac_bat_reg>;
 254                         vccio-supply = <&vdd_ac_bat_reg>;
 255
 256                         regulators {
 257                                 vdd1_reg: vdd1 {
 258                                         regulator-name = "vddio_ddr_1v2";
 259                                         regulator-min-microvolt = <1200000>;
 260                                         regulator-max-microvolt = <1200000>;
 261                                         regulator-always-on;
 262                                 };
 263
 264                                 vdd2_reg: vdd2 {
 265                                         regulator-name = "vdd_1v5_gen";
 266                                         regulator-min-microvolt = <1500000>;
 267                                         regulator-max-microvolt = <1500000>;
 268                                         regulator-always-on;
 269                                 };
 270
 271                                 vddctrl_reg: vddctrl {
 272                                         regulator-name = "vdd_cpu,vdd_sys";
 273                                         regulator-min-microvolt = <1000000>;
 274                                         regulator-max-microvolt = <1000000>;
 275                                         regulator-always-on;
 276                                 };
 277
 278                                 vio_reg: vio {
 279                                         regulator-name = "vdd_1v8_gen";
 280                                         regulator-min-microvolt = <1800000>;
 281                                         regulator-max-microvolt = <1800000>;
 282                                         regulator-always-on;
 283                                 };
 284
 285                                 ldo1_reg: ldo1 {
 286                                         regulator-name = "vdd_pexa,vdd_pexb";
 287                                         regulator-min-microvolt = <1050000>;
 288                                         regulator-max-microvolt = <1050000>;
 289                                 };
 290
 291                                 ldo2_reg: ldo2 {
 292                                         regulator-name = "vdd_sata,avdd_plle";
 293                                         regulator-min-microvolt = <1050000>;
 294                                         regulator-max-microvolt = <1050000>;
 295                                 };
 296
 297                                 /* LDO3 is not connected to anything */
 298
 299                                 ldo4_reg: ldo4 {
 300                                         regulator-name = "vdd_rtc";
 301                                         regulator-min-microvolt = <1200000>;
 302                                         regulator-max-microvolt = <1200000>;
 303                                         regulator-always-on;
 304                                 };
 305
 306                                 ldo5_reg: ldo5 {
 307                                         regulator-name = "vddio_sdmmc,avdd_vdac";
 308                                         regulator-min-microvolt = <3300000>;
 309                                         regulator-max-microvolt = <3300000>;
 310                                         regulator-always-on;
 311                                 };
 312
 313                                 ldo6_reg: ldo6 {
 314                                         regulator-name = "avdd_dsi_csi,pwrdet_mipi";
 315                                         regulator-min-microvolt = <1200000>;
 316                                         regulator-max-microvolt = <1200000>;
 317                                 };
 318
 319                                 ldo7_reg: ldo7 {
 320                                         regulator-name = "vdd_pllm,x,u,a_p_c_s";
 321                                         regulator-min-microvolt = <1200000>;
 322                                         regulator-max-microvolt = <1200000>;
 323                                         regulator-always-on;
 324                                 };
 325
 326                                 ldo8_reg: ldo8 {
 327                                         regulator-name = "vdd_ddr_hs";
 328                                         regulator-min-microvolt = <1000000>;
 329                                         regulator-max-microvolt = <1000000>;
 330                                         regulator-always-on;
 331                                 };
 332                         };
 333                 };
 334
 335                 temperature-sensor@4c {
 336                         compatible = "onnn,nct1008";
 337                         reg = <0x4c>;
 338                         vcc-supply = <&sys_3v3_reg>;
 339                         interrupt-parent = <&gpio>;
 340                         interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
 341                 };
 342
 343                 tps62361@60 {
 344                         compatible = "ti,tps62361";
 345                         reg = <0x60>;
 346
 347                         regulator-name = "tps62361-vout";
 348                         regulator-min-microvolt = <500000>;
 349                         regulator-max-microvolt = <1500000>;
 350                         regulator-boot-on;
 351                         regulator-always-on;
 352                         ti,vsel0-state-high;
 353                         ti,vsel1-state-high;
 354                 };
 355         };
 356
 357         spi@7000da00 {
 358                 status = "okay";
 359                 spi-max-frequency = <25000000>;
 360                 spi-flash@1 {
 361                         compatible = "winbond,w25q32";
 362                         reg = <1>;
 363                         spi-max-frequency = <20000000>;
 364                 };
 365         };
 366
 367         pmc@7000e400 {
 368                 status = "okay";
 369                 nvidia,invert-interrupt;
 370                 nvidia,suspend-mode = <1>;
 371                 nvidia,cpu-pwr-good-time = <2000>;
 372                 nvidia,cpu-pwr-off-time = <200>;
 373                 nvidia,core-pwr-good-time = <3845 3845>;
 374                 nvidia,core-pwr-off-time = <0>;
 375                 nvidia,core-power-req-active-high;
 376                 nvidia,sys-clock-req-active-high;
 377         };
 378
 379         ahub@70080000 {
 380                 i2s@70080400 {
 381                         status = "okay";
 382                 };
 383         };
 384
 385         sdhci@78000000 {
 386                 status = "okay";
 387                 cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 388                 wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
 389                 power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
 390                 bus-width = <4>;
 391         };
 392
 393         sdhci@78000600 {
 394                 status = "okay";
 395                 bus-width = <8>;
 396                 non-removable;
 397         };
 398
 399         usb@7d008000 {
 400                 status = "okay";
 401         };
 402
 403         usb-phy@7d008000 {
 404                 vbus-supply = <&usb3_vbus_reg>;
 405                 status = "okay";
 406         };
 407
 408         backlight: backlight {
 409                 compatible = "pwm-backlight";
 410
 411                 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 412                 power-supply = <&vdd_bl_reg>;
 413                 pwms = <&pwm 0 5000000>;
 414
 415                 brightness-levels = <0 4 8 16 32 64 128 255>;
 416                 default-brightness-level = <6>;
 417         };
 418
 419         clocks {
 420                 compatible = "simple-bus";
 421                 #address-cells = <1>;
 422                 #size-cells = <0>;
 423
 424                 clk32k_in: clock@0 {
 425                         compatible = "fixed-clock";
 426                         reg=<0>;
 427                         #clock-cells = <0>;
 428                         clock-frequency = <32768>;
 429                 };
 430         };
 431
 432         panel: panel {
 433                 compatible = "chunghwa,claa101wb01", "simple-panel";
 434                 ddc-i2c-bus = <&panelddc>;
 435
 436                 power-supply = <&vdd_pnl1_reg>;
 437                 enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
 438
 439                 backlight = <&backlight>;
 440         };
 441
 442         regulators {
 443                 compatible = "simple-bus";
 444                 #address-cells = <1>;
 445                 #size-cells = <0>;
 446
 447                 vdd_ac_bat_reg: regulator@0 {
 448                         compatible = "regulator-fixed";
 449                         reg = <0>;
 450                         regulator-name = "vdd_ac_bat";
 451                         regulator-min-microvolt = <5000000>;
 452                         regulator-max-microvolt = <5000000>;
 453                         regulator-always-on;
 454                 };
 455
 456                 cam_1v8_reg: regulator@1 {
 457                         compatible = "regulator-fixed";
 458                         reg = <1>;
 459                         regulator-name = "cam_1v8";
 460                         regulator-min-microvolt = <1800000>;
 461                         regulator-max-microvolt = <1800000>;
 462                         enable-active-high;
 463                         gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
 464                         vin-supply = <&vio_reg>;
 465                 };
 466
 467                 cp_5v_reg: regulator@2 {
 468                         compatible = "regulator-fixed";
 469                         reg = <2>;
 470                         regulator-name = "cp_5v";
 471                         regulator-min-microvolt = <5000000>;
 472                         regulator-max-microvolt = <5000000>;
 473                         regulator-boot-on;
 474                         regulator-always-on;
 475                         enable-active-high;
 476                         gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 477                 };
 478
 479                 emmc_3v3_reg: regulator@3 {
 480                         compatible = "regulator-fixed";
 481                         reg = <3>;
 482                         regulator-name = "emmc_3v3";
 483                         regulator-min-microvolt = <3300000>;
 484                         regulator-max-microvolt = <3300000>;
 485                         regulator-always-on;
 486                         regulator-boot-on;
 487                         enable-active-high;
 488                         gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 489                         vin-supply = <&sys_3v3_reg>;
 490                 };
 491
 492                 modem_3v3_reg: regulator@4 {
 493                         compatible = "regulator-fixed";
 494                         reg = <4>;
 495                         regulator-name = "modem_3v3";
 496                         regulator-min-microvolt = <3300000>;
 497                         regulator-max-microvolt = <3300000>;
 498                         enable-active-high;
 499                         gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
 500                 };
 501
 502                 pex_hvdd_3v3_reg: regulator@5 {
 503                         compatible = "regulator-fixed";
 504                         reg = <5>;
 505                         regulator-name = "pex_hvdd_3v3";
 506                         regulator-min-microvolt = <3300000>;
 507                         regulator-max-microvolt = <3300000>;
 508                         enable-active-high;
 509                         gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
 510                         vin-supply = <&sys_3v3_reg>;
 511                 };
 512
 513                 vdd_cam1_ldo_reg: regulator@6 {
 514                         compatible = "regulator-fixed";
 515                         reg = <6>;
 516                         regulator-name = "vdd_cam1_ldo";
 517                         regulator-min-microvolt = <2800000>;
 518                         regulator-max-microvolt = <2800000>;
 519                         enable-active-high;
 520                         gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
 521                         vin-supply = <&sys_3v3_reg>;
 522                 };
 523
 524                 vdd_cam2_ldo_reg: regulator@7 {
 525                         compatible = "regulator-fixed";
 526                         reg = <7>;
 527                         regulator-name = "vdd_cam2_ldo";
 528                         regulator-min-microvolt = <2800000>;
 529                         regulator-max-microvolt = <2800000>;
 530                         enable-active-high;
 531                         gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 532                         vin-supply = <&sys_3v3_reg>;
 533                 };
 534
 535                 vdd_cam3_ldo_reg: regulator@8 {
 536                         compatible = "regulator-fixed";
 537                         reg = <8>;
 538                         regulator-name = "vdd_cam3_ldo";
 539                         regulator-min-microvolt = <3300000>;
 540                         regulator-max-microvolt = <3300000>;
 541                         enable-active-high;
 542                         gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
 543                         vin-supply = <&sys_3v3_reg>;
 544                 };
 545
 546                 vdd_com_reg: regulator@9 {
 547                         compatible = "regulator-fixed";
 548                         reg = <9>;
 549                         regulator-name = "vdd_com";
 550                         regulator-min-microvolt = <3300000>;
 551                         regulator-max-microvolt = <3300000>;
 552                         regulator-always-on;
 553                         regulator-boot-on;
 554                         enable-active-high;
 555                         gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
 556                         vin-supply = <&sys_3v3_reg>;
 557                 };
 558
 559                 vdd_fuse_3v3_reg: regulator@10 {
 560                         compatible = "regulator-fixed";
 561                         reg = <10>;
 562                         regulator-name = "vdd_fuse_3v3";
 563                         regulator-min-microvolt = <3300000>;
 564                         regulator-max-microvolt = <3300000>;
 565                         enable-active-high;
 566                         gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
 567                         vin-supply = <&sys_3v3_reg>;
 568                 };
 569
 570                 vdd_pnl1_reg: regulator@11 {
 571                         compatible = "regulator-fixed";
 572                         reg = <11>;
 573                         regulator-name = "vdd_pnl1";
 574                         regulator-min-microvolt = <3300000>;
 575                         regulator-max-microvolt = <3300000>;
 576                         regulator-always-on;
 577                         regulator-boot-on;
 578                         enable-active-high;
 579                         gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
 580                         vin-supply = <&sys_3v3_reg>;
 581                 };
 582
 583                 vdd_vid_reg: regulator@12 {
 584                         compatible = "regulator-fixed";
 585                         reg = <12>;
 586                         regulator-name = "vddio_vid";
 587                         regulator-min-microvolt = <5000000>;
 588                         regulator-max-microvolt = <5000000>;
 589                         enable-active-high;
 590                         gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
 591                         gpio-open-drain;
 592                         vin-supply = <&vdd_5v0_reg>;
 593                 };
 594         };
 595
 596         sound {
 597                 compatible = "nvidia,tegra-audio-wm8903-cardhu",
 598                              "nvidia,tegra-audio-wm8903";
 599                 nvidia,model = "NVIDIA Tegra Cardhu";
 600
 601                 nvidia,audio-routing =
 602                         "Headphone Jack", "HPOUTR",
 603                         "Headphone Jack", "HPOUTL",
 604                         "Int Spk", "ROP",
 605                         "Int Spk", "RON",
 606                         "Int Spk", "LOP",
 607                         "Int Spk", "LON",
 608                         "Mic Jack", "MICBIAS",
 609                         "IN1L", "Mic Jack";
 610
 611                 nvidia,i2s-controller = <&tegra_i2s1>;
 612                 nvidia,audio-codec = <&wm8903>;
 613
 614                 nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 615                 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
 616                         GPIO_ACTIVE_HIGH>;
 617
 618                 clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 619                          <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
 620                          <&tegra_car TEGRA30_CLK_EXTERN1>;
 621                 clock-names = "pll_a", "pll_a_out0", "mclk";
 622         };
 623
 624         gpio-keys {
 625                 compatible = "gpio-keys";
 626
 627                 power {
 628                         label = "Power";
 629                         interrupt-parent = <&pmic>;
 630                         interrupts = <2 0>;
 631                         linux,code = <KEY_POWER>;
 632                         debounce-interval = <100>;
 633                         wakeup-source;
 634                 };
 635
 636                 volume-down {
 637                         label = "Volume Down";
 638                         gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
 639                         linux,code = <KEY_VOLUMEDOWN>;
 640                         debounce-interval = <10>;
 641                 };
 642
 643                 volume-up {
 644                         label = "Volume Up";
 645                         gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 646                         linux,code = <KEY_VOLUMEUP>;
 647                         debounce-interval = <10>;
 648                 };
 649         };
 650 };