arch/arm/include/asm/assembler.h

   1 /*
   2  *  arch/arm/include/asm/assembler.h
   3  *
   4  *  Copyright (C) 1996-2000 Russell King
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  *  This file contains arm architecture specific defines
  11  *  for the different processors.
  12  *
  13  *  Do not include any C declarations in this file - it is included by
  14  *  assembler source.
  15  */
  16 #ifndef __ASSEMBLY__
  17 #error "Only include this from assembly code"
  18 #endif
  19
  20 #include <asm/ptrace.h>
  21
  22 /*
  23  * Endian independent macros for shifting bytes within registers.
  24  */
  25 #ifndef __ARMEB__
  26 #define pull            lsr
  27 #define push            lsl
  28 #define get_byte_0      lsl #0
  29 #define get_byte_1      lsr #8
  30 #define get_byte_2      lsr #16
  31 #define get_byte_3      lsr #24
  32 #define put_byte_0      lsl #0
  33 #define put_byte_1      lsl #8
  34 #define put_byte_2      lsl #16
  35 #define put_byte_3      lsl #24
  36 #else
  37 #define pull            lsl
  38 #define push            lsr
  39 #define get_byte_0      lsr #24
  40 #define get_byte_1      lsr #16
  41 #define get_byte_2      lsr #8
  42 #define get_byte_3      lsl #0
  43 #define put_byte_0      lsl #24
  44 #define put_byte_1      lsl #16
  45 #define put_byte_2      lsl #8
  46 #define put_byte_3      lsl #0
  47 #endif
  48
  49 /*
  50  * Data preload for architectures that support it
  51  */
  52 #if __LINUX_ARM_ARCH__ >= 5
  53 #define PLD(code...)    code
  54 #else
  55 #define PLD(code...)
  56 #endif
  57
  58 /*
  59  * This can be used to enable code to cacheline align the destination
  60  * pointer when bulk writing to memory.  Experiments on StrongARM and
  61  * XScale didn't show this a worthwhile thing to do when the cache is not
  62  * set to write-allocate (this would need further testing on XScale when WA
  63  * is used).
  64  *
  65  * On Feroceon there is much to gain however, regardless of cache mode.
  66  */
  67 #ifdef CONFIG_CPU_FEROCEON
  68 #define CALGN(code...) code
  69 #else
  70 #define CALGN(code...)
  71 #endif
  72
  73 /*
  74  * Enable and disable interrupts
  75  */
  76 #if __LINUX_ARM_ARCH__ >= 6
  77         .macro  disable_irq_notrace
  78         cpsid   i
  79         .endm
  80
  81         .macro  enable_irq_notrace
  82         cpsie   i
  83         .endm
  84 #else
  85         .macro  disable_irq_notrace
  86         msr     cpsr_c, #PSR_I_BIT | SVC_MODE
  87         .endm
  88
  89         .macro  enable_irq_notrace
  90         msr     cpsr_c, #SVC_MODE
  91         .endm
  92 #endif
  93
  94         .macro asm_trace_hardirqs_off
  95 #if defined(CONFIG_TRACE_IRQFLAGS)
  96         stmdb   sp!, {r0-r3, ip, lr}
  97         bl      trace_hardirqs_off
  98         ldmia   sp!, {r0-r3, ip, lr}
  99 #endif
 100         .endm
 101
 102         .macro asm_trace_hardirqs_on_cond, cond
 103 #if defined(CONFIG_TRACE_IRQFLAGS)
 104         /*
 105          * actually the registers should be pushed and pop'd conditionally, but
 106          * after bl the flags are certainly clobbered
 107          */
 108         stmdb   sp!, {r0-r3, ip, lr}
 109         bl\cond trace_hardirqs_on
 110         ldmia   sp!, {r0-r3, ip, lr}
 111 #endif
 112         .endm
 113
 114         .macro asm_trace_hardirqs_on
 115         asm_trace_hardirqs_on_cond al
 116         .endm
 117
 118         .macro disable_irq
 119         disable_irq_notrace
 120         asm_trace_hardirqs_off
 121         .endm
 122
 123         .macro enable_irq
 124         asm_trace_hardirqs_on
 125         enable_irq_notrace
 126         .endm
 127 /*
 128  * Save the current IRQ state and disable IRQs.  Note that this macro
 129  * assumes FIQs are enabled, and that the processor is in SVC mode.
 130  */
 131         .macro  save_and_disable_irqs, oldcpsr
 132         mrs     \oldcpsr, cpsr
 133         disable_irq
 134         .endm
 135
 136 /*
 137  * Restore interrupt state previously stored in a register.  We don't
 138  * guarantee that this will preserve the flags.
 139  */
 140         .macro  restore_irqs_notrace, oldcpsr
 141         msr     cpsr_c, \oldcpsr
 142         .endm
 143
 144         .macro restore_irqs, oldcpsr
 145         tst     \oldcpsr, #PSR_I_BIT
 146         asm_trace_hardirqs_on_cond eq
 147         restore_irqs_notrace \oldcpsr
 148         .endm
 149
 150 #define USER(x...)                              \
 151 9999:   x;                                      \
 152         .pushsection __ex_table,"a";            \
 153         .align  3;                              \
 154         .long   9999b,9001f;                    \
 155         .popsection
 156
 157 /*
 158  * SMP data memory barrier
 159  */
 160         .macro  smp_dmb
 161 #ifdef CONFIG_SMP
 162 #if __LINUX_ARM_ARCH__ >= 7
 163         dmb
 164 #elif __LINUX_ARM_ARCH__ == 6
 165         mcr     p15, 0, r0, c7, c10, 5  @ dmb
 166 #endif
 167 #endif
 168         .endm
 169
 170 #ifdef CONFIG_THUMB2_KERNEL
 171         .macro  setmode, mode, reg
 172         mov     \reg, #\mode
 173         msr     cpsr_c, \reg
 174         .endm
 175 #else
 176         .macro  setmode, mode, reg
 177         msr     cpsr_c, #\mode
 178         .endm
 179 #endif
 180
 181 /*
 182  * STRT/LDRT access macros with ARM and Thumb-2 variants
 183  */
 184 #ifdef CONFIG_THUMB2_KERNEL
 185
 186         .macro  usraccoff, instr, reg, ptr, inc, off, cond, abort
 187 9999:
 188         .if     \inc == 1
 189         \instr\cond\()bt \reg, [\ptr, #\off]
 190         .elseif \inc == 4
 191         \instr\cond\()t \reg, [\ptr, #\off]
 192         .else
 193         .error  "Unsupported inc macro argument"
 194         .endif
 195
 196         .pushsection __ex_table,"a"
 197         .align  3
 198         .long   9999b, \abort
 199         .popsection
 200         .endm
 201
 202         .macro  usracc, instr, reg, ptr, inc, cond, rept, abort
 203         @ explicit IT instruction needed because of the label
 204         @ introduced by the USER macro
 205         .ifnc   \cond,al
 206         .if     \rept == 1
 207         itt     \cond
 208         .elseif \rept == 2
 209         ittt    \cond
 210         .else
 211         .error  "Unsupported rept macro argument"
 212         .endif
 213         .endif
 214
 215         @ Slightly optimised to avoid incrementing the pointer twice
 216         usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
 217         .if     \rept == 2
 218         usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
 219         .endif
 220
 221         add\cond \ptr, #\rept * \inc
 222         .endm
 223
 224 #else   /* !CONFIG_THUMB2_KERNEL */
 225
 226         .macro  usracc, instr, reg, ptr, inc, cond, rept, abort
 227         .rept   \rept
 228 9999:
 229         .if     \inc == 1
 230         \instr\cond\()bt \reg, [\ptr], #\inc
 231         .elseif \inc == 4
 232         \instr\cond\()t \reg, [\ptr], #\inc
 233         .else
 234         .error  "Unsupported inc macro argument"
 235         .endif
 236
 237         .pushsection __ex_table,"a"
 238         .align  3
 239         .long   9999b, \abort
 240         .popsection
 241         .endr
 242         .endm
 243
 244 #endif  /* CONFIG_THUMB2_KERNEL */
 245
 246         .macro  strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
 247         usracc  str, \reg, \ptr, \inc, \cond, \rept, \abort
 248         .endm
 249
 250         .macro  ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
 251         usracc  ldr, \reg, \ptr, \inc, \cond, \rept, \abort
 252         .endm