ARM: perf: extend interrupt-affinity property for PPIs

[deliverable/linux.git] / arch / arm / kernel / perf_event.c

#undef DEBUG

/*
 * ARM performance counter support.
 *
 * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
 * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
 *
 * This code is based on the sparc64 perf event code, which is in turn based
 * on the x86 code.
 */
#define pr_fmt(fmt) "hw perfevents: " fmt

#include <linux/bitmap.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>

#include <asm/cputype.h>
#include <asm/irq_regs.h>
#include <asm/pmu.h>

static int
armpmu_map_cache_event(const unsigned (*cache_map)
                                      [PERF_COUNT_HW_CACHE_MAX]
                                      [PERF_COUNT_HW_CACHE_OP_MAX]
                                      [PERF_COUNT_HW_CACHE_RESULT_MAX],
                       u64 config)
{
        unsigned int cache_type, cache_op, cache_result, ret;

        cache_type = (config >>  0) & 0xff;
        if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
                return -EINVAL;

        cache_op = (config >>  8) & 0xff;
        if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
                return -EINVAL;

        cache_result = (config >> 16) & 0xff;
        if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
                return -EINVAL;

        ret = (int)(*cache_map)[cache_type][cache_op][cache_result];

        if (ret == CACHE_OP_UNSUPPORTED)
                return -ENOENT;

        return ret;
}

static int
armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
{
        int mapping;

        if (config >= PERF_COUNT_HW_MAX)
                return -EINVAL;

        mapping = (*event_map)[config];
        return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
}

static int
armpmu_map_raw_event(u32 raw_event_mask, u64 config)
{
        return (int)(config & raw_event_mask);
}

int
armpmu_map_event(struct perf_event *event,
                 const unsigned (*event_map)[PERF_COUNT_HW_MAX],
                 const unsigned (*cache_map)
                                [PERF_COUNT_HW_CACHE_MAX]
                                [PERF_COUNT_HW_CACHE_OP_MAX]
                                [PERF_COUNT_HW_CACHE_RESULT_MAX],
                 u32 raw_event_mask)
{
        u64 config = event->attr.config;
        int type = event->attr.type;

        if (type == event->pmu->type)
                return armpmu_map_raw_event(raw_event_mask, config);

        switch (type) {
        case PERF_TYPE_HARDWARE:
                return armpmu_map_hw_event(event_map, config);
        case PERF_TYPE_HW_CACHE:
                return armpmu_map_cache_event(cache_map, config);
        case PERF_TYPE_RAW:
                return armpmu_map_raw_event(raw_event_mask, config);
        }

        return -ENOENT;
}

int armpmu_event_set_period(struct perf_event *event)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        struct hw_perf_event *hwc = &event->hw;
        s64 left = local64_read(&hwc->period_left);
        s64 period = hwc->sample_period;
        int ret = 0;

        if (unlikely(left <= -period)) {
                left = period;
                local64_set(&hwc->period_left, left);
                hwc->last_period = period;
                ret = 1;
        }

        if (unlikely(left <= 0)) {
                left += period;
                local64_set(&hwc->period_left, left);
                hwc->last_period = period;
                ret = 1;
        }

        /*
         * Limit the maximum period to prevent the counter value
         * from overtaking the one we are about to program. In
         * effect we are reducing max_period to account for
         * interrupt latency (and we are being very conservative).
         */
        if (left > (armpmu->max_period >> 1))
                left = armpmu->max_period >> 1;

        local64_set(&hwc->prev_count, (u64)-left);

        armpmu->write_counter(event, (u64)(-left) & 0xffffffff);

        perf_event_update_userpage(event);

        return ret;
}

u64 armpmu_event_update(struct perf_event *event)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        struct hw_perf_event *hwc = &event->hw;
        u64 delta, prev_raw_count, new_raw_count;

again:
        prev_raw_count = local64_read(&hwc->prev_count);
        new_raw_count = armpmu->read_counter(event);

        if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
                             new_raw_count) != prev_raw_count)
                goto again;

        delta = (new_raw_count - prev_raw_count) & armpmu->max_period;

        local64_add(delta, &event->count);
        local64_sub(delta, &hwc->period_left);

        return new_raw_count;
}

static void
armpmu_read(struct perf_event *event)
{
        armpmu_event_update(event);
}

static void
armpmu_stop(struct perf_event *event, int flags)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        struct hw_perf_event *hwc = &event->hw;

        /*
         * ARM pmu always has to update the counter, so ignore
         * PERF_EF_UPDATE, see comments in armpmu_start().
         */
        if (!(hwc->state & PERF_HES_STOPPED)) {
                armpmu->disable(event);
                armpmu_event_update(event);
                hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
        }
}

static void armpmu_start(struct perf_event *event, int flags)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        struct hw_perf_event *hwc = &event->hw;

        /*
         * ARM pmu always has to reprogram the period, so ignore
         * PERF_EF_RELOAD, see the comment below.
         */
        if (flags & PERF_EF_RELOAD)
                WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));

        hwc->state = 0;
        /*
         * Set the period again. Some counters can't be stopped, so when we
         * were stopped we simply disabled the IRQ source and the counter
         * may have been left counting. If we don't do this step then we may
         * get an interrupt too soon or *way* too late if the overflow has
         * happened since disabling.
         */
        armpmu_event_set_period(event);
        armpmu->enable(event);
}

static void
armpmu_del(struct perf_event *event, int flags)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
        struct hw_perf_event *hwc = &event->hw;
        int idx = hwc->idx;

        armpmu_stop(event, PERF_EF_UPDATE);
        hw_events->events[idx] = NULL;
        clear_bit(idx, hw_events->used_mask);
        if (armpmu->clear_event_idx)
                armpmu->clear_event_idx(hw_events, event);

        perf_event_update_userpage(event);
}

static int
armpmu_add(struct perf_event *event, int flags)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
        struct hw_perf_event *hwc = &event->hw;
        int idx;
        int err = 0;

        /* An event following a process won't be stopped earlier */
        if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
                return -ENOENT;

        perf_pmu_disable(event->pmu);

        /* If we don't have a space for the counter then finish early. */
        idx = armpmu->get_event_idx(hw_events, event);
        if (idx < 0) {
                err = idx;
                goto out;
        }

        /*
         * If there is an event in the counter we are going to use then make
         * sure it is disabled.
         */
        event->hw.idx = idx;
        armpmu->disable(event);
        hw_events->events[idx] = event;

        hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
        if (flags & PERF_EF_START)
                armpmu_start(event, PERF_EF_RELOAD);

        /* Propagate our changes to the userspace mapping. */
        perf_event_update_userpage(event);

out:
        perf_pmu_enable(event->pmu);
        return err;
}

static int
validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events,
                               struct perf_event *event)
{
        struct arm_pmu *armpmu;

        if (is_software_event(event))
                return 1;

        /*
         * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The
         * core perf code won't check that the pmu->ctx == leader->ctx
         * until after pmu->event_init(event).
         */
        if (event->pmu != pmu)
                return 0;

        if (event->state < PERF_EVENT_STATE_OFF)
                return 1;

        if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
                return 1;

        armpmu = to_arm_pmu(event->pmu);
        return armpmu->get_event_idx(hw_events, event) >= 0;
}

static int
validate_group(struct perf_event *event)
{
        struct perf_event *sibling, *leader = event->group_leader;
        struct pmu_hw_events fake_pmu;

        /*
         * Initialise the fake PMU. We only need to populate the
         * used_mask for the purposes of validation.
         */
        memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask));

        if (!validate_event(event->pmu, &fake_pmu, leader))
                return -EINVAL;

        list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
                if (!validate_event(event->pmu, &fake_pmu, sibling))
                        return -EINVAL;
        }

        if (!validate_event(event->pmu, &fake_pmu, event))
                return -EINVAL;

        return 0;
}

static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
{
        struct arm_pmu *armpmu;
        struct platform_device *plat_device;
        struct arm_pmu_platdata *plat;
        int ret;
        u64 start_clock, finish_clock;

        /*
         * we request the IRQ with a (possibly percpu) struct arm_pmu**, but
         * the handlers expect a struct arm_pmu*. The percpu_irq framework will
         * do any necessary shifting, we just need to perform the first
         * dereference.
         */
        armpmu = *(void **)dev;
        plat_device = armpmu->plat_device;
        plat = dev_get_platdata(&plat_device->dev);

        start_clock = sched_clock();
        if (plat && plat->handle_irq)
                ret = plat->handle_irq(irq, armpmu, armpmu->handle_irq);
        else
                ret = armpmu->handle_irq(irq, armpmu);
        finish_clock = sched_clock();

        perf_sample_event_took(finish_clock - start_clock);
        return ret;
}

static void
armpmu_release_hardware(struct arm_pmu *armpmu)
{
        armpmu->free_irq(armpmu);
}

static int
armpmu_reserve_hardware(struct arm_pmu *armpmu)
{
        int err = armpmu->request_irq(armpmu, armpmu_dispatch_irq);
        if (err) {
                armpmu_release_hardware(armpmu);
                return err;
        }

        return 0;
}

static void
hw_perf_event_destroy(struct perf_event *event)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        atomic_t *active_events  = &armpmu->active_events;
        struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;

        if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
                armpmu_release_hardware(armpmu);
                mutex_unlock(pmu_reserve_mutex);
        }
}

static int
event_requires_mode_exclusion(struct perf_event_attr *attr)
{
        return attr->exclude_idle || attr->exclude_user ||
               attr->exclude_kernel || attr->exclude_hv;
}

static int
__hw_perf_event_init(struct perf_event *event)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        struct hw_perf_event *hwc = &event->hw;
        int mapping;

        mapping = armpmu->map_event(event);

        if (mapping < 0) {
                pr_debug("event %x:%llx not supported\n", event->attr.type,
                         event->attr.config);
                return mapping;
        }

        /*
         * We don't assign an index until we actually place the event onto
         * hardware. Use -1 to signify that we haven't decided where to put it
         * yet. For SMP systems, each core has it's own PMU so we can't do any
         * clever allocation or constraints checking at this point.
         */
        hwc->idx                = -1;
        hwc->config_base        = 0;
        hwc->config             = 0;
        hwc->event_base         = 0;

        /*
         * Check whether we need to exclude the counter from certain modes.
         */
        if ((!armpmu->set_event_filter ||
             armpmu->set_event_filter(hwc, &event->attr)) &&
             event_requires_mode_exclusion(&event->attr)) {
                pr_debug("ARM performance counters do not support "
                         "mode exclusion\n");
                return -EOPNOTSUPP;
        }

        /*
         * Store the event encoding into the config_base field.
         */
        hwc->config_base            |= (unsigned long)mapping;

        if (!is_sampling_event(event)) {
                /*
                 * For non-sampling runs, limit the sample_period to half
                 * of the counter width. That way, the new counter value
                 * is far less likely to overtake the previous one unless
                 * you have some serious IRQ latency issues.
                 */
                hwc->sample_period  = armpmu->max_period >> 1;
                hwc->last_period    = hwc->sample_period;
                local64_set(&hwc->period_left, hwc->sample_period);
        }

        if (event->group_leader != event) {
                if (validate_group(event) != 0)
                        return -EINVAL;
        }

        return 0;
}

static int armpmu_event_init(struct perf_event *event)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        int err = 0;
        atomic_t *active_events = &armpmu->active_events;

        /*
         * Reject CPU-affine events for CPUs that are of a different class to
         * that which this PMU handles. Process-following events (where
         * event->cpu == -1) can be migrated between CPUs, and thus we have to
         * reject them later (in armpmu_add) if they're scheduled on a
         * different class of CPU.
         */
        if (event->cpu != -1 &&
                !cpumask_test_cpu(event->cpu, &armpmu->supported_cpus))
                return -ENOENT;

        /* does not support taken branch sampling */
        if (has_branch_stack(event))
                return -EOPNOTSUPP;

        if (armpmu->map_event(event) == -ENOENT)
                return -ENOENT;

        event->destroy = hw_perf_event_destroy;

        if (!atomic_inc_not_zero(active_events)) {
                mutex_lock(&armpmu->reserve_mutex);
                if (atomic_read(active_events) == 0)
                        err = armpmu_reserve_hardware(armpmu);

                if (!err)
                        atomic_inc(active_events);
                mutex_unlock(&armpmu->reserve_mutex);
        }

        if (err)
                return err;

        err = __hw_perf_event_init(event);
        if (err)
                hw_perf_event_destroy(event);

        return err;
}

static void armpmu_enable(struct pmu *pmu)
{
        struct arm_pmu *armpmu = to_arm_pmu(pmu);
        struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
        int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);

        /* For task-bound events we may be called on other CPUs */
        if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
                return;

        if (enabled)
                armpmu->start(armpmu);
}

static void armpmu_disable(struct pmu *pmu)
{
        struct arm_pmu *armpmu = to_arm_pmu(pmu);

        /* For task-bound events we may be called on other CPUs */
        if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
                return;

        armpmu->stop(armpmu);
}

/*
 * In heterogeneous systems, events are specific to a particular
 * microarchitecture, and aren't suitable for another. Thus, only match CPUs of
 * the same microarchitecture.
 */
static int armpmu_filter_match(struct perf_event *event)
{
        struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
        unsigned int cpu = smp_processor_id();
        return cpumask_test_cpu(cpu, &armpmu->supported_cpus);
}

static void armpmu_init(struct arm_pmu *armpmu)
{
        atomic_set(&armpmu->active_events, 0);
        mutex_init(&armpmu->reserve_mutex);

        armpmu->pmu = (struct pmu) {
                .pmu_enable     = armpmu_enable,
                .pmu_disable    = armpmu_disable,
                .event_init     = armpmu_event_init,
                .add            = armpmu_add,
                .del            = armpmu_del,
                .start          = armpmu_start,
                .stop           = armpmu_stop,
                .read           = armpmu_read,
                .filter_match   = armpmu_filter_match,
        };
}

int armpmu_register(struct arm_pmu *armpmu, int type)
{
        armpmu_init(armpmu);
        pr_info("enabled with %s PMU driver, %d counters available\n",
                        armpmu->name, armpmu->num_events);
        return perf_pmu_register(&armpmu->pmu, armpmu->name, type);
}

/* Set at runtime when we know what CPU type we are. */
static struct arm_pmu *__oprofile_cpu_pmu;

/*
 * Despite the names, these two functions are CPU-specific and are used
 * by the OProfile/perf code.
 */
const char *perf_pmu_name(void)
{
        if (!__oprofile_cpu_pmu)
                return NULL;

        return __oprofile_cpu_pmu->name;
}
EXPORT_SYMBOL_GPL(perf_pmu_name);

int perf_num_counters(void)
{
        int max_events = 0;

        if (__oprofile_cpu_pmu != NULL)
                max_events = __oprofile_cpu_pmu->num_events;

        return max_events;
}
EXPORT_SYMBOL_GPL(perf_num_counters);

static void cpu_pmu_enable_percpu_irq(void *data)
{
        int irq = *(int *)data;

        enable_percpu_irq(irq, IRQ_TYPE_NONE);
}

static void cpu_pmu_disable_percpu_irq(void *data)
{
        int irq = *(int *)data;

        disable_percpu_irq(irq);
}

static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
{
        int i, irq, irqs;
        struct platform_device *pmu_device = cpu_pmu->plat_device;
        struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events;

        irqs = min(pmu_device->num_resources, num_possible_cpus());

        irq = platform_get_irq(pmu_device, 0);
        if (irq >= 0 && irq_is_percpu(irq)) {
                on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1);
                free_percpu_irq(irq, &hw_events->percpu_pmu);
        } else {
                for (i = 0; i < irqs; ++i) {
                        int cpu = i;

                        if (cpu_pmu->irq_affinity)
                                cpu = cpu_pmu->irq_affinity[i];

                        if (!cpumask_test_and_clear_cpu(cpu, &cpu_pmu->active_irqs))
                                continue;
                        irq = platform_get_irq(pmu_device, i);
                        if (irq >= 0)
                                free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu));
                }
        }
}

static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
{
        int i, err, irq, irqs;
        struct platform_device *pmu_device = cpu_pmu->plat_device;
        struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events;

        if (!pmu_device)
                return -ENODEV;

        irqs = min(pmu_device->num_resources, num_possible_cpus());
        if (irqs < 1) {
                pr_warn_once("perf/ARM: No irqs for PMU defined, sampling events not supported\n");
                return 0;
        }

        irq = platform_get_irq(pmu_device, 0);
        if (irq >= 0 && irq_is_percpu(irq)) {
                err = request_percpu_irq(irq, handler, "arm-pmu",
                                         &hw_events->percpu_pmu);
                if (err) {
                        pr_err("unable to request IRQ%d for ARM PMU counters\n",
                                irq);
                        return err;
                }
                on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1);
        } else {
                for (i = 0; i < irqs; ++i) {
                        int cpu = i;

                        err = 0;
                        irq = platform_get_irq(pmu_device, i);
                        if (irq < 0)
                                continue;

                        if (cpu_pmu->irq_affinity)
                                cpu = cpu_pmu->irq_affinity[i];

                        /*
                         * If we have a single PMU interrupt that we can't shift,
                         * assume that we're running on a uniprocessor machine and
                         * continue. Otherwise, continue without this interrupt.
                         */
                        if (irq_set_affinity(irq, cpumask_of(cpu)) && irqs > 1) {
                                pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n",
                                        irq, cpu);
                                continue;
                        }

                        err = request_irq(irq, handler,
                                          IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu",
                                          per_cpu_ptr(&hw_events->percpu_pmu, cpu));
                        if (err) {
                                pr_err("unable to request IRQ%d for ARM PMU counters\n",
                                        irq);
                                return err;
                        }

                        cpumask_set_cpu(cpu, &cpu_pmu->active_irqs);
                }
        }

        return 0;
}

/*
 * PMU hardware loses all context when a CPU goes offline.
 * When a CPU is hotplugged back in, since some hardware registers are
 * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
 * junk values out of them.
 */
static int cpu_pmu_notify(struct notifier_block *b, unsigned long action,
                          void *hcpu)
{
        int cpu = (unsigned long)hcpu;
        struct arm_pmu *pmu = container_of(b, struct arm_pmu, hotplug_nb);

        if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
                return NOTIFY_DONE;

        if (!cpumask_test_cpu(cpu, &pmu->supported_cpus))
                return NOTIFY_DONE;

        if (pmu->reset)
                pmu->reset(pmu);
        else
                return NOTIFY_DONE;

        return NOTIFY_OK;
}

static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
{
        int err;
        int cpu;
        struct pmu_hw_events __percpu *cpu_hw_events;

        cpu_hw_events = alloc_percpu(struct pmu_hw_events);
        if (!cpu_hw_events)
                return -ENOMEM;

        cpu_pmu->hotplug_nb.notifier_call = cpu_pmu_notify;
        err = register_cpu_notifier(&cpu_pmu->hotplug_nb);
        if (err)
                goto out_hw_events;

        for_each_possible_cpu(cpu) {
                struct pmu_hw_events *events = per_cpu_ptr(cpu_hw_events, cpu);
                raw_spin_lock_init(&events->pmu_lock);
                events->percpu_pmu = cpu_pmu;
        }

        cpu_pmu->hw_events      = cpu_hw_events;
        cpu_pmu->request_irq    = cpu_pmu_request_irq;
        cpu_pmu->free_irq       = cpu_pmu_free_irq;

        /* Ensure the PMU has sane values out of reset. */
        if (cpu_pmu->reset)
                on_each_cpu_mask(&cpu_pmu->supported_cpus, cpu_pmu->reset,
                         cpu_pmu, 1);

        /* If no interrupts available, set the corresponding capability flag */
        if (!platform_get_irq(cpu_pmu->plat_device, 0))
                cpu_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;

        return 0;

out_hw_events:
        free_percpu(cpu_hw_events);
        return err;
}

static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu)
{
        unregister_cpu_notifier(&cpu_pmu->hotplug_nb);
        free_percpu(cpu_pmu->hw_events);
}

/*
 * CPU PMU identification and probing.
 */
static int probe_current_pmu(struct arm_pmu *pmu,
                             const struct pmu_probe_info *info)
{
        int cpu = get_cpu();
        unsigned int cpuid = read_cpuid_id();
        int ret = -ENODEV;

        pr_info("probing PMU on CPU %d\n", cpu);

        for (; info->init != NULL; info++) {
                if ((cpuid & info->mask) != info->cpuid)
                        continue;
                ret = info->init(pmu);
                break;
        }

        put_cpu();
        return ret;
}

static int of_pmu_irq_cfg(struct arm_pmu *pmu)
{
        int *irqs, i = 0;
        bool using_spi = false;
        struct platform_device *pdev = pmu->plat_device;

        irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
        if (!irqs)
                return -ENOMEM;

        do {
                struct device_node *dn;
                int cpu, irq;

                /* See if we have an affinity entry */
                dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity", i);
                if (!dn)
                        break;

                /* Check the IRQ type and prohibit a mix of PPIs and SPIs */
                irq = platform_get_irq(pdev, i);
                if (irq >= 0) {
                        bool spi = !irq_is_percpu(irq);

                        if (i > 0 && spi != using_spi) {
                                pr_err("PPI/SPI IRQ type mismatch for %s!\n",
                                        dn->name);
                                kfree(irqs);
                                return -EINVAL;
                        }

                        using_spi = spi;
                }

                /* Now look up the logical CPU number */
                for_each_possible_cpu(cpu)
                        if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL))
                                break;

                if (cpu >= nr_cpu_ids) {
                        pr_warn("Failed to find logical CPU for %s\n",
                                dn->name);
                        of_node_put(dn);
                        cpumask_setall(&pmu->supported_cpus);
                        break;
                }
                of_node_put(dn);

                /* For SPIs, we need to track the affinity per IRQ */
                if (using_spi) {
                        if (i >= pdev->num_resources) {
                                of_node_put(dn);
                                break;
                        }

                        irqs[i] = cpu;
                }

                /* Keep track of the CPUs containing this PMU type */
                cpumask_set_cpu(cpu, &pmu->supported_cpus);
                of_node_put(dn);
                i++;
        } while (1);

        /* If we didn't manage to parse anything, claim to support all CPUs */
        if (cpumask_weight(&pmu->supported_cpus) == 0)
                cpumask_setall(&pmu->supported_cpus);

        /* If we matched up the IRQ affinities, use them to route the SPIs */
        if (using_spi && i == pdev->num_resources)
                pmu->irq_affinity = irqs;
        else
                kfree(irqs);

        return 0;
}

int arm_pmu_device_probe(struct platform_device *pdev,
                         const struct of_device_id *of_table,
                         const struct pmu_probe_info *probe_table)
{
        const struct of_device_id *of_id;
        const int (*init_fn)(struct arm_pmu *);
        struct device_node *node = pdev->dev.of_node;
        struct arm_pmu *pmu;
        int ret = -ENODEV;

        pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL);
        if (!pmu) {
                pr_info("failed to allocate PMU device!\n");
                return -ENOMEM;
        }

        if (!__oprofile_cpu_pmu)
                __oprofile_cpu_pmu = pmu;

        pmu->plat_device = pdev;

        if (node && (of_id = of_match_node(of_table, pdev->dev.of_node))) {
                init_fn = of_id->data;

                ret = of_pmu_irq_cfg(pmu);
                if (!ret)
                        ret = init_fn(pmu);
        } else {
                ret = probe_current_pmu(pmu, probe_table);
                cpumask_setall(&pmu->supported_cpus);
        }

        if (ret) {
                pr_info("failed to probe PMU!\n");
                goto out_free;
        }

        ret = cpu_pmu_init(pmu);
        if (ret)
                goto out_free;

        ret = armpmu_register(pmu, -1);
        if (ret)
                goto out_destroy;

        return 0;

out_destroy:
        cpu_pmu_destroy(pmu);
out_free:
        pr_info("failed to register PMU devices!\n");
        kfree(pmu);
        return ret;
}