arch/arm/mach-at91/Kconfig

   1 if ARCH_AT91
   2
   3 menu "Atmel AT91 System-on-Chip"
   4
   5 choice
   6         prompt "Atmel AT91 Processor"
   7
   8 config ARCH_AT91RM9200
   9         bool "AT91RM9200"
  10
  11 config ARCH_AT91SAM9260
  12         bool "AT91SAM9260 or AT91SAM9XE"
  13
  14 config ARCH_AT91SAM9261
  15         bool "AT91SAM9261"
  16
  17 config ARCH_AT91SAM9263
  18         bool "AT91SAM9263"
  19
  20 endchoice
  21
  22 # ----------------------------------------------------------
  23
  24 if ARCH_AT91RM9200
  25
  26 comment "AT91RM9200 Board Type"
  27
  28 config MACH_ONEARM
  29         bool "Ajeco 1ARM Single Board Computer"
  30         depends on ARCH_AT91RM9200
  31         help
  32           Select this if you are using Ajeco's 1ARM Single Board Computer.
  33           <http://www.ajeco.fi/products.htm>
  34
  35 config ARCH_AT91RM9200DK
  36         bool "Atmel AT91RM9200-DK Development board"
  37         depends on ARCH_AT91RM9200
  38         help
  39           Select this if you are using Atmel's AT91RM9200-DK Development board.
  40           (Discontinued)
  41
  42 config MACH_AT91RM9200EK
  43         bool "Atmel AT91RM9200-EK Evaluation Kit"
  44         depends on ARCH_AT91RM9200
  45         help
  46           Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
  47           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
  48
  49 config MACH_CSB337
  50         bool "Cogent CSB337"
  51         depends on ARCH_AT91RM9200
  52         help
  53           Select this if you are using Cogent's CSB337 board.
  54           <http://www.cogcomp.com/csb_csb337.htm>
  55
  56 config MACH_CSB637
  57         bool "Cogent CSB637"
  58         depends on ARCH_AT91RM9200
  59         help
  60           Select this if you are using Cogent's CSB637 board.
  61           <http://www.cogcomp.com/csb_csb637.htm>
  62
  63 config MACH_CARMEVA
  64         bool "Conitec ARM&EVA"
  65         depends on ARCH_AT91RM9200
  66         help
  67           Select this if you are using Conitec's AT91RM9200-MCU-Module.
  68           <http://www.conitec.net/english/linuxboard.htm>
  69
  70 config MACH_ATEB9200
  71         bool "Embest ATEB9200"
  72         depends on ARCH_AT91RM9200
  73         help
  74           Select this if you are using Embest's ATEB9200 board.
  75           <http://www.embedinfo.com/english/product/ATEB9200.asp>
  76
  77 config MACH_KB9200
  78         bool "KwikByte KB920x"
  79         depends on ARCH_AT91RM9200
  80         help
  81           Select this if you are using KwikByte's KB920x board.
  82           <http://kwikbyte.com/KB9202_description_new.htm>
  83
  84 config MACH_PICOTUX2XX
  85         bool "picotux 200"
  86         depends on ARCH_AT91RM9200
  87         help
  88           Select this if you are using a picotux 200.
  89           <http://www.picotux.com/>
  90
  91 config MACH_KAFA
  92         bool "Sperry-Sun KAFA board"
  93         depends on ARCH_AT91RM9200
  94         help
  95           Select this if you are using Sperry-Sun's KAFA board.
  96
  97 endif
  98
  99 # ----------------------------------------------------------
 100
 101 if ARCH_AT91SAM9260
 102
 103 comment "AT91SAM9260 Variants"
 104
 105 config ARCH_AT91SAM9260_SAM9XE
 106         bool "AT91SAM9XE"
 107         depends on ARCH_AT91SAM9260
 108         help
 109           Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
 110           They are basically AT91SAM9260s with various sizes of embedded Flash.
 111
 112 comment "AT91SAM9260 / AT91SAM9XE Board Type"
 113
 114 config MACH_AT91SAM9260EK
 115         bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 116         depends on ARCH_AT91SAM9260
 117         help
 118           Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 119           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 120
 121 endif
 122
 123 # ----------------------------------------------------------
 124
 125 if ARCH_AT91SAM9261
 126
 127 comment "AT91SAM9261 Board Type"
 128
 129 config MACH_AT91SAM9261EK
 130         bool "Atmel AT91SAM9261-EK Evaluation Kit"
 131         depends on ARCH_AT91SAM9261
 132         help
 133           Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 134           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
 135
 136 endif
 137
 138 # ----------------------------------------------------------
 139
 140 if ARCH_AT91SAM9263
 141
 142 comment "AT91SAM9263 Board Type"
 143
 144 config MACH_AT91SAM9263EK
 145         bool "Atmel AT91SAM9263-EK Evaluation Kit"
 146         depends on ARCH_AT91SAM9263
 147         help
 148           Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 149           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 150
 151 endif
 152
 153 # ----------------------------------------------------------
 154
 155 comment "AT91 Board Options"
 156
 157 config MTD_AT91_DATAFLASH_CARD
 158         bool "Enable DataFlash Card support"
 159         depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 160         help
 161           Enable support for the DataFlash card.
 162
 163 config MTD_NAND_AT91_BUSWIDTH_16
 164         bool "Enable 16-bit data bus interface to NAND flash"
 165         depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 166         help
 167           On AT91SAM926x boards both types of NAND flash can be present
 168           (8 and 16 bit data bus width).
 169
 170 # ----------------------------------------------------------
 171
 172 comment "AT91 Feature Selections"
 173
 174 config AT91_PROGRAMMABLE_CLOCKS
 175         bool "Programmable Clocks"
 176         help
 177           Select this if you need to program one or more of the PCK0..PCK3
 178           programmable clock outputs.
 179
 180 endmenu
 181
 182 endif