arch/arm/mach-at91/Kconfig

   1 if ARCH_AT91
   2
   3 config HAVE_AT91_DATAFLASH_CARD
   4         bool
   5
   6 config HAVE_AT91_DBGU0
   7         bool
   8
   9 config HAVE_AT91_DBGU1
  10         bool
  11
  12 config HAVE_AT91_USART3
  13         bool
  14
  15 config HAVE_AT91_USART4
  16         bool
  17
  18 config HAVE_AT91_USART5
  19         bool
  20
  21 config AT91_SAM9_ALT_RESET
  22         bool
  23
  24 config AT91_SAM9G45_RESET
  25         bool
  26
  27 menu "Atmel AT91 System-on-Chip"
  28
  29 choice
  30         prompt "Atmel AT91 Processor"
  31
  32 config ARCH_AT91RM9200
  33         bool "AT91RM9200"
  34         select CPU_ARM920T
  35         select GENERIC_CLOCKEVENTS
  36         select HAVE_AT91_DBGU0
  37         select HAVE_AT91_USART3
  38
  39 config ARCH_AT91SAM9260
  40         bool "AT91SAM9260 or AT91SAM9XE"
  41         select CPU_ARM926T
  42         select GENERIC_CLOCKEVENTS
  43         select HAVE_AT91_DBGU0
  44         select HAVE_AT91_USART3
  45         select HAVE_AT91_USART4
  46         select HAVE_AT91_USART5
  47         select HAVE_NET_MACB
  48         select AT91_SAM9_ALT_RESET
  49
  50 config ARCH_AT91SAM9261
  51         bool "AT91SAM9261"
  52         select CPU_ARM926T
  53         select GENERIC_CLOCKEVENTS
  54         select HAVE_FB_ATMEL
  55         select HAVE_AT91_DBGU0
  56         select AT91_SAM9_ALT_RESET
  57
  58 config ARCH_AT91SAM9G10
  59         bool "AT91SAM9G10"
  60         select CPU_ARM926T
  61         select GENERIC_CLOCKEVENTS
  62         select HAVE_AT91_DBGU0
  63         select HAVE_FB_ATMEL
  64         select AT91_SAM9_ALT_RESET
  65
  66 config ARCH_AT91SAM9263
  67         bool "AT91SAM9263"
  68         select CPU_ARM926T
  69         select GENERIC_CLOCKEVENTS
  70         select HAVE_FB_ATMEL
  71         select HAVE_NET_MACB
  72         select HAVE_AT91_DBGU1
  73         select AT91_SAM9_ALT_RESET
  74
  75 config ARCH_AT91SAM9RL
  76         bool "AT91SAM9RL"
  77         select CPU_ARM926T
  78         select GENERIC_CLOCKEVENTS
  79         select HAVE_AT91_USART3
  80         select HAVE_FB_ATMEL
  81         select HAVE_AT91_DBGU0
  82         select AT91_SAM9_ALT_RESET
  83
  84 config ARCH_AT91SAM9G20
  85         bool "AT91SAM9G20"
  86         select CPU_ARM926T
  87         select GENERIC_CLOCKEVENTS
  88         select HAVE_AT91_DBGU0
  89         select HAVE_AT91_USART3
  90         select HAVE_AT91_USART4
  91         select HAVE_AT91_USART5
  92         select HAVE_NET_MACB
  93         select AT91_SAM9_ALT_RESET
  94
  95 config ARCH_AT91SAM9G45
  96         bool "AT91SAM9G45"
  97         select CPU_ARM926T
  98         select GENERIC_CLOCKEVENTS
  99         select HAVE_AT91_USART3
 100         select HAVE_FB_ATMEL
 101         select HAVE_NET_MACB
 102         select HAVE_AT91_DBGU1
 103         select AT91_SAM9G45_RESET
 104
 105 config ARCH_AT91SAM9X5
 106         bool "AT91SAM9x5 family"
 107         select CPU_ARM926T
 108         select GENERIC_CLOCKEVENTS
 109         select HAVE_FB_ATMEL
 110         select HAVE_NET_MACB
 111         select HAVE_AT91_DBGU0
 112         select AT91_SAM9G45_RESET
 113
 114 config ARCH_AT91X40
 115         bool "AT91x40"
 116         select ARCH_USES_GETTIMEOFFSET
 117
 118 endchoice
 119
 120 config AT91_PMC_UNIT
 121         bool
 122         default !ARCH_AT91X40
 123
 124 # ----------------------------------------------------------
 125
 126 if ARCH_AT91RM9200
 127
 128 comment "AT91RM9200 Board Type"
 129
 130 config MACH_ONEARM
 131         bool "Ajeco 1ARM Single Board Computer"
 132         help
 133           Select this if you are using Ajeco's 1ARM Single Board Computer.
 134           <http://www.ajeco.fi/>
 135
 136 config ARCH_AT91RM9200DK
 137         bool "Atmel AT91RM9200-DK Development board"
 138         select HAVE_AT91_DATAFLASH_CARD
 139         help
 140           Select this if you are using Atmel's AT91RM9200-DK Development board.
 141           (Discontinued)
 142
 143 config MACH_AT91RM9200EK
 144         bool "Atmel AT91RM9200-EK Evaluation Kit"
 145         select HAVE_AT91_DATAFLASH_CARD
 146         help
 147           Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
 148           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 149
 150 config MACH_CSB337
 151         bool "Cogent CSB337"
 152         help
 153           Select this if you are using Cogent's CSB337 board.
 154           <http://www.cogcomp.com/csb_csb337.htm>
 155
 156 config MACH_CSB637
 157         bool "Cogent CSB637"
 158         help
 159           Select this if you are using Cogent's CSB637 board.
 160           <http://www.cogcomp.com/csb_csb637.htm>
 161
 162 config MACH_CARMEVA
 163         bool "Conitec ARM&EVA"
 164         help
 165           Select this if you are using Conitec's AT91RM9200-MCU-Module.
 166           <http://www.conitec.net/english/linuxboard.php>
 167
 168 config MACH_ATEB9200
 169         bool "Embest ATEB9200"
 170         help
 171           Select this if you are using Embest's ATEB9200 board.
 172           <http://www.embedinfo.com/english/product/ATEB9200.asp>
 173
 174 config MACH_KB9200
 175         bool "KwikByte KB920x"
 176         help
 177           Select this if you are using KwikByte's KB920x board.
 178           <http://www.kwikbyte.com/KB9202.html>
 179
 180 config MACH_PICOTUX2XX
 181         bool "picotux 200"
 182         help
 183           Select this if you are using a picotux 200.
 184           <http://www.picotux.com/>
 185
 186 config MACH_KAFA
 187         bool "Sperry-Sun KAFA board"
 188         help
 189           Select this if you are using Sperry-Sun's KAFA board.
 190
 191 config MACH_ECBAT91
 192         bool "emQbit ECB_AT91 SBC"
 193         select HAVE_AT91_DATAFLASH_CARD
 194         help
 195           Select this if you are using emQbit's ECB_AT91 board.
 196           <http://wiki.emqbit.com/free-ecb-at91>
 197
 198 config MACH_YL9200
 199         bool "ucDragon YL-9200"
 200         help
 201           Select this if you are using the ucDragon YL-9200 board.
 202
 203 config MACH_CPUAT91
 204         bool "Eukrea CPUAT91"
 205         help
 206           Select this if you are using the Eukrea Electromatique's
 207           CPUAT91 board <http://www.eukrea.com/>.
 208
 209 config MACH_ECO920
 210         bool "eco920"
 211         help
 212           Select this if you are using the eco920 board
 213
 214 config MACH_RSI_EWS
 215         bool "RSI Embedded Webserver"
 216         depends on ARCH_AT91RM9200
 217         help
 218           Select this if you are using RSIs EWS board.
 219 endif
 220
 221 # ----------------------------------------------------------
 222
 223 if ARCH_AT91SAM9260
 224
 225 comment "AT91SAM9260 Variants"
 226
 227 comment "AT91SAM9260 / AT91SAM9XE Board Type"
 228
 229 config MACH_AT91SAM9260EK
 230         bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 231         select HAVE_AT91_DATAFLASH_CARD
 232         help
 233           Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 234           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 235
 236 config MACH_CAM60
 237         bool "KwikByte KB9260 (CAM60) board"
 238         help
 239           Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
 240           <http://www.kwikbyte.com/KB9260.html>
 241
 242 config MACH_SAM9_L9260
 243         bool "Olimex SAM9-L9260 board"
 244         select HAVE_AT91_DATAFLASH_CARD
 245         help
 246           Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 247           <http://www.olimex.com/dev/sam9-L9260.html>
 248
 249 config MACH_AFEB9260
 250         bool "Custom afeb9260 board v1"
 251         help
 252           Select this if you are using custom afeb9260 board based on
 253           open hardware design. Select this for revision 1 of the board.
 254           <svn://194.85.238.22/home/users/george/svn/arm9eb>
 255           <http://groups.google.com/group/arm9fpga-evolution-board>
 256
 257 config MACH_USB_A9260
 258         bool "CALAO USB-A9260"
 259         help
 260           Select this if you are using a Calao Systems USB-A9260.
 261           <http://www.calao-systems.com>
 262
 263 config MACH_QIL_A9260
 264         bool "CALAO QIL-A9260 board"
 265         help
 266           Select this if you are using a Calao Systems QIL-A9260 Board.
 267           <http://www.calao-systems.com>
 268
 269 config MACH_CPU9260
 270         bool "Eukrea CPU9260 board"
 271         help
 272           Select this if you are using a Eukrea Electromatique's
 273           CPU9260 Board <http://www.eukrea.com/>
 274
 275 config MACH_FLEXIBITY
 276         bool "Flexibity Connect board"
 277         help
 278           Select this if you are using Flexibity Connect board
 279           <http://www.flexibity.com>
 280
 281 endif
 282
 283 # ----------------------------------------------------------
 284
 285 if ARCH_AT91SAM9261
 286
 287 comment "AT91SAM9261 Board Type"
 288
 289 config MACH_AT91SAM9261EK
 290         bool "Atmel AT91SAM9261-EK Evaluation Kit"
 291         select HAVE_AT91_DATAFLASH_CARD
 292         help
 293           Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 294           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
 295
 296 endif
 297
 298 # ----------------------------------------------------------
 299
 300 if ARCH_AT91SAM9G10
 301
 302 comment "AT91SAM9G10 Board Type"
 303
 304 config MACH_AT91SAM9G10EK
 305         bool "Atmel AT91SAM9G10-EK Evaluation Kit"
 306         select HAVE_AT91_DATAFLASH_CARD
 307         help
 308           Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
 309           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
 310
 311 endif
 312
 313 # ----------------------------------------------------------
 314
 315 if ARCH_AT91SAM9263
 316
 317 comment "AT91SAM9263 Board Type"
 318
 319 config MACH_AT91SAM9263EK
 320         bool "Atmel AT91SAM9263-EK Evaluation Kit"
 321         select HAVE_AT91_DATAFLASH_CARD
 322         help
 323           Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 324           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 325
 326 config MACH_USB_A9263
 327         bool "CALAO USB-A9263"
 328         help
 329           Select this if you are using a Calao Systems USB-A9263.
 330           <http://www.calao-systems.com>
 331
 332 config MACH_NEOCORE926
 333         bool "Adeneo NEOCORE926"
 334         select HAVE_AT91_DATAFLASH_CARD
 335         help
 336           Select this if you are using the Adeneo Neocore 926 board.
 337
 338 endif
 339
 340 # ----------------------------------------------------------
 341
 342 if ARCH_AT91SAM9RL
 343
 344 comment "AT91SAM9RL Board Type"
 345
 346 config MACH_AT91SAM9RLEK
 347         bool "Atmel AT91SAM9RL-EK Evaluation Kit"
 348         help
 349           Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 350
 351 endif
 352
 353 # ----------------------------------------------------------
 354
 355 if ARCH_AT91SAM9G20
 356
 357 comment "AT91SAM9G20 Board Type"
 358
 359 config MACH_AT91SAM9G20EK
 360         bool "Atmel AT91SAM9G20-EK Evaluation Kit"
 361         select HAVE_AT91_DATAFLASH_CARD
 362         help
 363           Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 364           that embeds only one SD/MMC slot.
 365
 366 config MACH_AT91SAM9G20EK_2MMC
 367         depends on MACH_AT91SAM9G20EK
 368         bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
 369         help
 370           Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 371           with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
 372           onwards.
 373
 374 config MACH_CPU9G20
 375         bool "Eukrea CPU9G20 board"
 376         help
 377           Select this if you are using a Eukrea Electromatique's
 378           CPU9G20 Board <http://www.eukrea.com/>
 379
 380 config MACH_ACMENETUSFOXG20
 381         bool "Acme Systems srl FOX Board G20"
 382         help
 383           Select this if you are using Acme Systems
 384           FOX Board G20 <http://www.acmesystems.it>
 385
 386 config MACH_PORTUXG20
 387         bool "taskit PortuxG20"
 388         help
 389           Select this if you are using taskit's PortuxG20.
 390           <http://www.taskit.de/en/>
 391
 392 config MACH_STAMP9G20
 393         bool "taskit Stamp9G20 CPU module"
 394         help
 395           Select this if you are using taskit's Stamp9G20 CPU module on its
 396           evaluation board.
 397           <http://www.taskit.de/en/>
 398
 399 config MACH_PCONTROL_G20
 400         bool "PControl G20 CPU module"
 401         help
 402           Select this if you are using taskit's Stamp9G20 CPU module on this
 403           carrier board, beeing the decentralized unit of a building automation
 404           system; featuring nvram, eth-switch, iso-rs485, display, io
 405
 406 config MACH_GSIA18S
 407         bool "GS_IA18_S board"
 408         help
 409           This enables support for the GS_IA18_S board
 410           produced by GeoSIG Ltd company. This is an internet accelerograph.
 411           <http://www.geosig.com>
 412
 413 config MACH_USB_A9G20
 414         bool "CALAO USB-A9G20"
 415         depends on ARCH_AT91SAM9G20
 416         help
 417           Select this if you are using a Calao Systems USB-A9G20.
 418           <http://www.calao-systems.com>
 419
 420 endif
 421
 422 if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
 423 comment "AT91SAM9260/AT91SAM9G20 boards"
 424
 425 config MACH_SNAPPER_9260
 426         bool "Bluewater Systems Snapper 9260/9G20 module"
 427         help
 428           Select this if you are using the Bluewater Systems Snapper 9260 or
 429           Snapper 9G20 modules.
 430           <http://www.bluewatersys.com/>
 431 endif
 432
 433 # ----------------------------------------------------------
 434
 435 if ARCH_AT91SAM9G45
 436
 437 comment "AT91SAM9G45 Board Type"
 438
 439 config MACH_AT91SAM9M10G45EK
 440         bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 441         help
 442           Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
 443           "ES" at the end of the name means that this board is an
 444           Engineering Sample.
 445
 446 endif
 447
 448 # ----------------------------------------------------------
 449
 450 if ARCH_AT91X40
 451
 452 comment "AT91X40 Board Type"
 453
 454 config MACH_AT91EB01
 455         bool "Atmel AT91EB01 Evaluation Kit"
 456         help
 457           Select this if you are using Atmel's AT91EB01 Evaluation Kit.
 458           It is also a popular target for simulators such as GDB's
 459           ARM simulator (commonly known as the ARMulator) and the
 460           Skyeye simulator.
 461
 462 endif
 463
 464 # ----------------------------------------------------------
 465
 466 comment "Generic Board Type"
 467
 468 config MACH_AT91SAM_DT
 469         bool "Atmel AT91SAM Evaluation Kits with device-tree support"
 470         select USE_OF
 471         help
 472           Select this if you want to experiment device-tree with
 473           an Atmel Evaluation Kit.
 474
 475 # ----------------------------------------------------------
 476
 477 comment "AT91 Board Options"
 478
 479 config MTD_AT91_DATAFLASH_CARD
 480         bool "Enable DataFlash Card support"
 481         depends on HAVE_AT91_DATAFLASH_CARD
 482         help
 483           Enable support for the DataFlash card.
 484
 485 # ----------------------------------------------------------
 486
 487 comment "AT91 Feature Selections"
 488
 489 config AT91_PROGRAMMABLE_CLOCKS
 490         bool "Programmable Clocks"
 491         help
 492           Select this if you need to program one or more of the PCK0..PCK3
 493           programmable clock outputs.
 494
 495 config AT91_SLOW_CLOCK
 496         bool "Suspend-to-RAM disables main oscillator"
 497         depends on SUSPEND
 498         help
 499           Select this if you want Suspend-to-RAM to save the most power
 500           possible (without powering off the CPU) by disabling the PLLs
 501           and main oscillator so that only the 32 KiHz clock is available.
 502
 503           When only that slow-clock is available, some peripherals lose
 504           functionality.  Many can't issue wakeup events unless faster
 505           clocks are available.  Some lose their operating state and
 506           need to be completely re-initialized.
 507
 508 config AT91_TIMER_HZ
 509        int "Kernel HZ (jiffies per second)"
 510        range 32 1024
 511        depends on ARCH_AT91
 512        default "128" if ARCH_AT91RM9200
 513        default "100"
 514        help
 515           On AT91rm9200 chips where you're using a system clock derived
 516           from the 32768 Hz hardware clock, this tick rate should divide
 517           it exactly: use a power-of-two value, such as 128 or 256, to
 518           reduce timing errors caused by rounding.
 519
 520           On AT91sam926x chips, or otherwise when using a higher precision
 521           system clock (of at least several MHz), rounding is less of a
 522           problem so it can be safer to use a decimal values like 100.
 523
 524 choice
 525         prompt "Select a UART for early kernel messages"
 526
 527 config AT91_EARLY_DBGU0
 528         bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
 529         depends on HAVE_AT91_DBGU0
 530
 531 config AT91_EARLY_DBGU1
 532         bool "DBGU on 9263 and 9g45"
 533         depends on HAVE_AT91_DBGU1
 534
 535 config AT91_EARLY_USART0
 536         bool "USART0"
 537
 538 config AT91_EARLY_USART1
 539         bool "USART1"
 540
 541 config AT91_EARLY_USART2
 542         bool "USART2"
 543         depends on ! ARCH_AT91X40
 544
 545 config AT91_EARLY_USART3
 546         bool "USART3"
 547         depends on HAVE_AT91_USART3
 548
 549 config AT91_EARLY_USART4
 550         bool "USART4"
 551         depends on HAVE_AT91_USART4
 552
 553 config AT91_EARLY_USART5
 554         bool "USART5"
 555         depends on HAVE_AT91_USART5
 556
 557 endchoice
 558
 559 endmenu
 560
 561 endif