arch/arm/mach-davinci/Kconfig

   1 if ARCH_DAVINCI
   2
   3 config AINTC
   4         bool
   5
   6 config CP_INTC
   7         bool
   8
   9 config ARCH_DAVINCI_DMx
  10         bool
  11
  12 menu "TI DaVinci Implementations"
  13
  14 comment "DaVinci Core Type"
  15
  16 config ARCH_DAVINCI_DM644x
  17         bool "DaVinci 644x based system"
  18         select AINTC
  19         select ARCH_DAVINCI_DMx
  20
  21 config ARCH_DAVINCI_DM355
  22         bool "DaVinci 355 based system"
  23         select AINTC
  24         select ARCH_DAVINCI_DMx
  25
  26 config ARCH_DAVINCI_DM646x
  27         bool "DaVinci 646x based system"
  28         select AINTC
  29         select ARCH_DAVINCI_DMx
  30
  31 config ARCH_DAVINCI_DA830
  32         bool "DA830/OMAP-L137 based system"
  33         select CP_INTC
  34         select ARCH_DAVINCI_DA8XX
  35         select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
  36
  37 config ARCH_DAVINCI_DA850
  38         bool "DA850/OMAP-L138 based system"
  39         select CP_INTC
  40         select ARCH_DAVINCI_DA8XX
  41         select ARCH_HAS_CPUFREQ
  42
  43 config ARCH_DAVINCI_DA8XX
  44         bool
  45
  46 config ARCH_DAVINCI_DM365
  47         bool "DaVinci 365 based system"
  48         select AINTC
  49         select ARCH_DAVINCI_DMx
  50
  51 comment "DaVinci Board Type"
  52
  53 config MACH_DAVINCI_EVM
  54         bool "TI DM644x EVM"
  55         default ARCH_DAVINCI_DM644x
  56         depends on ARCH_DAVINCI_DM644x
  57         help
  58           Configure this option to specify the whether the board used
  59           for development is a DM644x EVM
  60
  61 config MACH_SFFSDR
  62         bool "Lyrtech SFFSDR"
  63         depends on ARCH_DAVINCI_DM644x
  64         help
  65           Say Y here to select the Lyrtech Small Form Factor
  66           Software Defined Radio (SFFSDR) board.
  67
  68 config MACH_NEUROS_OSD2
  69         bool "Neuros OSD2 Open Television Set Top Box"
  70         depends on ARCH_DAVINCI_DM644x
  71         help
  72           Configure this option to specify the whether the board used
  73           for development is a Neuros OSD2 Open Set Top Box.
  74
  75 config MACH_DAVINCI_DM355_EVM
  76         bool "TI DM355 EVM"
  77         default ARCH_DAVINCI_DM355
  78         depends on ARCH_DAVINCI_DM355
  79         help
  80           Configure this option to specify the whether the board used
  81           for development is a DM355 EVM
  82
  83 config MACH_DM355_LEOPARD
  84         bool "DM355 Leopard board"
  85         depends on ARCH_DAVINCI_DM355
  86         help
  87           Configure this option to specify the whether the board used
  88           for development is a DM355 Leopard board.
  89
  90 config MACH_DAVINCI_DM6467_EVM
  91         bool "TI DM6467 EVM"
  92         default ARCH_DAVINCI_DM646x
  93         depends on ARCH_DAVINCI_DM646x
  94         help
  95           Configure this option to specify the whether the board used
  96           for development is a DM6467 EVM
  97
  98 config MACH_DAVINCI_DM365_EVM
  99         bool "TI DM365 EVM"
 100         default ARCH_DAVINCI_DM365
 101         depends on ARCH_DAVINCI_DM365
 102         help
 103           Configure this option to specify whether the board used
 104           for development is a DM365 EVM
 105
 106 config MACH_DAVINCI_DA830_EVM
 107         bool "TI DA830/OMAP-L137 Reference Platform"
 108         default ARCH_DAVINCI_DA830
 109         depends on ARCH_DAVINCI_DA830
 110         select GPIO_PCF857X
 111         help
 112           Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
 113
 114 choice
 115         prompt "Select DA830/OMAP-L137 UI board peripheral"
 116         depends on MACH_DAVINCI_DA830_EVM
 117         help
 118           The presence of UI card on the DA830/OMAP-L137 EVM is detected
 119           automatically based on successful probe of the I2C based GPIO
 120           expander on that board. This option selected in this menu has
 121           an effect only in case of a successful UI card detection.
 122
 123 config DA830_UI_LCD
 124         bool "LCD"
 125         help
 126           Say Y here to use the LCD as a framebuffer or simple character
 127           display.
 128
 129 config DA830_UI_NAND
 130         bool "NAND flash"
 131         help
 132           Say Y here to use the NAND flash.  Do not forget to setup
 133           the switch correctly.
 134 endchoice
 135
 136 config MACH_DAVINCI_DA850_EVM
 137         bool "TI DA850/OMAP-L138 Reference Platform"
 138         default ARCH_DAVINCI_DA850
 139         depends on ARCH_DAVINCI_DA850
 140         select GPIO_PCA953X
 141         help
 142           Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
 143
 144 choice
 145         prompt "Select peripherals connected to expander on UI board"
 146         depends on MACH_DAVINCI_DA850_EVM
 147         help
 148           The presence of User Interface (UI) card on the DA850/OMAP-L138
 149           EVM is detected automatically based on successful probe of the I2C
 150           based GPIO expander on that card. This option selected in this
 151           menu has an effect only in case of a successful UI card detection.
 152
 153 config DA850_UI_NONE
 154         bool "No peripheral is enabled"
 155         help
 156           Say Y if you do not want to enable any of the peripherals connected
 157           to TCA6416 expander on DA850/OMAP-L138 EVM UI card
 158
 159 config DA850_UI_RMII
 160         bool "RMII Ethernet PHY"
 161         help
 162           Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
 163           This PHY is found on the UI daughter card that is supplied with
 164           the EVM.
 165           NOTE: Please take care while choosing this option, MII PHY will
 166           not be functional if RMII mode is selected.
 167
 168 endchoice
 169
 170 config DAVINCI_MUX
 171         bool "DAVINCI multiplexing support"
 172         depends on ARCH_DAVINCI
 173         default y
 174         help
 175           Pin multiplexing support for DAVINCI boards. If your bootloader
 176           sets the multiplexing correctly, say N. Otherwise, or if unsure,
 177           say Y.
 178
 179 config DAVINCI_MUX_DEBUG
 180         bool "Multiplexing debug output"
 181         depends on DAVINCI_MUX
 182         help
 183           Makes the multiplexing functions print out a lot of debug info.
 184           This is useful if you want to find out the correct values of the
 185           multiplexing registers.
 186
 187 config DAVINCI_MUX_WARNINGS
 188         bool "Warn about pins the bootloader didn't set up"
 189         depends on DAVINCI_MUX
 190         help
 191           Choose Y here to warn whenever driver initialization logic needs
 192           to change the pin multiplexing setup.  When there are no warnings
 193           printed, it's safe to deselect DAVINCI_MUX for your product.
 194
 195 config DAVINCI_RESET_CLOCKS
 196         bool "Reset unused clocks during boot"
 197         depends on ARCH_DAVINCI
 198         help
 199           Say Y if you want to reset unused clocks during boot.
 200           This option saves power, but assumes all drivers are
 201           using the clock framework. Broken drivers that do not
 202           yet use clock framework may not work with this option.
 203           If you are booting from another operating system, you
 204           probably do not want this option enabled until your
 205           device drivers work properly.
 206
 207 endmenu
 208
 209 endif