arch/arm/mach-davinci/Kconfig

   1 if ARCH_DAVINCI
   2
   3 config AINTC
   4         bool
   5
   6 config CP_INTC
   7         bool
   8         select IRQ_DOMAIN
   9
  10 config ARCH_DAVINCI_DMx
  11         bool
  12         select CPU_ARM926T
  13
  14 menu "TI DaVinci Implementations"
  15
  16 comment "DaVinci Core Type"
  17
  18 config ARCH_DAVINCI_DM644x
  19         bool "DaVinci 644x based system"
  20         select AINTC
  21         select ARCH_DAVINCI_DMx
  22
  23 config ARCH_DAVINCI_DM355
  24         bool "DaVinci 355 based system"
  25         select AINTC
  26         select ARCH_DAVINCI_DMx
  27
  28 config ARCH_DAVINCI_DM646x
  29         bool "DaVinci 646x based system"
  30         select AINTC
  31         select ARCH_DAVINCI_DMx
  32
  33 config ARCH_DAVINCI_DA830
  34         bool "DA830/OMAP-L137/AM17x based system"
  35         depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
  36         select ARCH_DAVINCI_DA8XX
  37         # needed on silicon revs 1.0, 1.1:
  38         select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
  39         select CP_INTC
  40
  41 config ARCH_DAVINCI_DA850
  42         bool "DA850/OMAP-L138/AM18x based system"
  43         depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
  44         select ARCH_DAVINCI_DA8XX
  45         select CP_INTC
  46
  47 config ARCH_DAVINCI_DA8XX
  48         bool
  49         select CPU_ARM926T
  50
  51 config ARCH_DAVINCI_DM365
  52         bool "DaVinci 365 based system"
  53         select AINTC
  54         select ARCH_DAVINCI_DMx
  55
  56 comment "DaVinci Board Type"
  57
  58 config MACH_DA8XX_DT
  59         bool "Support DA8XX platforms using device tree"
  60         default y
  61         depends on ARCH_DAVINCI_DA8XX
  62         select PINCTRL
  63         help
  64           Say y here to include support for TI DaVinci DA850 based using
  65           Flattened Device Tree. More information at Documentation/devicetree
  66
  67 config MACH_DAVINCI_EVM
  68         bool "TI DM644x EVM"
  69         default ARCH_DAVINCI_DM644x
  70         depends on ARCH_DAVINCI_DM644x
  71         select EEPROM_AT24
  72         select I2C
  73         help
  74           Configure this option to specify the whether the board used
  75           for development is a DM644x EVM
  76
  77 config MACH_SFFSDR
  78         bool "Lyrtech SFFSDR"
  79         depends on ARCH_DAVINCI_DM644x
  80         select EEPROM_AT24
  81         select I2C
  82         help
  83           Say Y here to select the Lyrtech Small Form Factor
  84           Software Defined Radio (SFFSDR) board.
  85
  86 config MACH_NEUROS_OSD2
  87         bool "Neuros OSD2 Open Television Set Top Box"
  88         depends on ARCH_DAVINCI_DM644x
  89         help
  90           Configure this option to specify the whether the board used
  91           for development is a Neuros OSD2 Open Set Top Box.
  92
  93 config MACH_DAVINCI_DM355_EVM
  94         bool "TI DM355 EVM"
  95         default ARCH_DAVINCI_DM355
  96         depends on ARCH_DAVINCI_DM355
  97         help
  98           Configure this option to specify the whether the board used
  99           for development is a DM355 EVM
 100
 101 config MACH_DM355_LEOPARD
 102         bool "DM355 Leopard board"
 103         depends on ARCH_DAVINCI_DM355
 104         help
 105           Configure this option to specify the whether the board used
 106           for development is a DM355 Leopard board.
 107
 108 config MACH_DAVINCI_DM6467_EVM
 109         bool "TI DM6467 EVM"
 110         default ARCH_DAVINCI_DM646x
 111         depends on ARCH_DAVINCI_DM646x
 112         select EEPROM_AT24
 113         select I2C
 114         select MACH_DAVINCI_DM6467TEVM
 115         help
 116           Configure this option to specify the whether the board used
 117           for development is a DM6467 EVM
 118
 119 config MACH_DAVINCI_DM6467TEVM
 120         bool
 121
 122 config MACH_DAVINCI_DM365_EVM
 123         bool "TI DM365 EVM"
 124         default ARCH_DAVINCI_DM365
 125         depends on ARCH_DAVINCI_DM365
 126         select EEPROM_AT24
 127         select I2C
 128         help
 129           Configure this option to specify whether the board used
 130           for development is a DM365 EVM
 131
 132 config MACH_DAVINCI_DA830_EVM
 133         bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 134         default ARCH_DAVINCI_DA830
 135         depends on ARCH_DAVINCI_DA830
 136         select EEPROM_AT24
 137         select GPIO_PCF857X
 138         select I2C
 139         help
 140           Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 141
 142 choice
 143         prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
 144         depends on MACH_DAVINCI_DA830_EVM
 145         help
 146           The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
 147           detected automatically based on successful probe of the I2C
 148           based GPIO expander on that board. This option selected in this
 149           menu has an effect only in case of a successful UI card detection.
 150
 151 config DA830_UI_LCD
 152         bool "LCD"
 153         help
 154           Say Y here to use the LCD as a framebuffer or simple character
 155           display.
 156
 157 config DA830_UI_NAND
 158         bool "NAND flash"
 159         help
 160           Say Y here to use the NAND flash. Do not forget to setup
 161           the switch correctly.
 162 endchoice
 163
 164 config MACH_DAVINCI_DA850_EVM
 165         bool "TI DA850/OMAP-L138/AM18x Reference Platform"
 166         default ARCH_DAVINCI_DA850
 167         depends on ARCH_DAVINCI_DA850
 168         help
 169           Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
 170
 171 choice
 172         prompt "Select peripherals connected to expander on UI board"
 173         depends on MACH_DAVINCI_DA850_EVM
 174         help
 175           The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
 176           EVM is detected automatically based on successful probe of the I2C
 177           based GPIO expander on that card. This option selected in this
 178           menu has an effect only in case of a successful UI card detection.
 179
 180 config DA850_UI_NONE
 181         bool "No peripheral is enabled"
 182         help
 183           Say Y if you do not want to enable any of the peripherals connected
 184           to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
 185
 186 config DA850_UI_RMII
 187         bool "RMII Ethernet PHY"
 188         help
 189           Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
 190           EVM. This PHY is found on the UI daughter card that is supplied with
 191           the EVM.
 192           NOTE: Please take care while choosing this option, MII PHY will
 193           not be functional if RMII mode is selected.
 194
 195 config DA850_UI_SD_VIDEO_PORT
 196         bool "Video Port Interface"
 197         help
 198           Say Y if you want to use Video Port Interface (VPIF) on the
 199           DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
 200           UI daughter card that is supplied with the EVM.
 201
 202 endchoice
 203
 204 config MACH_MITYOMAPL138
 205         bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 206         depends on ARCH_DAVINCI_DA850
 207         select EEPROM_AT24
 208         select I2C
 209         help
 210           Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 211           System on Module.  Information on this SoM may be found at
 212           http://www.mitydsp.com
 213
 214 config MACH_OMAPL138_HAWKBOARD
 215         bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 216         depends on ARCH_DAVINCI_DA850
 217         help
 218           Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
 219           Information of this board may be found at
 220           http://www.hawkboard.org/
 221
 222 config DAVINCI_MUX
 223         bool "DAVINCI multiplexing support"
 224         depends on ARCH_DAVINCI
 225         default y
 226         help
 227           Pin multiplexing support for DAVINCI boards. If your bootloader
 228           sets the multiplexing correctly, say N. Otherwise, or if unsure,
 229           say Y.
 230
 231 config DAVINCI_MUX_DEBUG
 232         bool "Multiplexing debug output"
 233         depends on DAVINCI_MUX
 234         help
 235           Makes the multiplexing functions print out a lot of debug info.
 236           This is useful if you want to find out the correct values of the
 237           multiplexing registers.
 238
 239 config DAVINCI_MUX_WARNINGS
 240         bool "Warn about pins the bootloader didn't set up"
 241         depends on DAVINCI_MUX
 242         help
 243           Choose Y here to warn whenever driver initialization logic needs
 244           to change the pin multiplexing setup. When there are no warnings
 245           printed, it's safe to deselect DAVINCI_MUX for your product.
 246
 247 config DAVINCI_RESET_CLOCKS
 248         bool "Reset unused clocks during boot"
 249         depends on ARCH_DAVINCI
 250         help
 251           Say Y if you want to reset unused clocks during boot.
 252           This option saves power, but assumes all drivers are
 253           using the clock framework. Broken drivers that do not
 254           yet use clock framework may not work with this option.
 255           If you are booting from another operating system, you
 256           probably do not want this option enabled until your
 257           device drivers work properly.
 258
 259 endmenu
 260
 261 endif