arch/arm/mach-davinci/Kconfig

   1 if ARCH_DAVINCI
   2
   3 config AINTC
   4         bool
   5
   6 config CP_INTC
   7         bool
   8         select IRQ_DOMAIN
   9
  10 config ARCH_DAVINCI_DMx
  11         bool
  12         select CPU_ARM926T
  13
  14 menu "TI DaVinci Implementations"
  15
  16 comment "DaVinci Core Type"
  17
  18 config ARCH_DAVINCI_DM644x
  19         bool "DaVinci 644x based system"
  20         select AINTC
  21         select ARCH_DAVINCI_DMx
  22
  23 config ARCH_DAVINCI_DM355
  24         bool "DaVinci 355 based system"
  25         select AINTC
  26         select ARCH_DAVINCI_DMx
  27
  28 config ARCH_DAVINCI_DM646x
  29         bool "DaVinci 646x based system"
  30         select AINTC
  31         select ARCH_DAVINCI_DMx
  32
  33 config ARCH_DAVINCI_DA830
  34         bool "DA830/OMAP-L137/AM17x based system"
  35         select ARCH_DAVINCI_DA8XX
  36         select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
  37         select CP_INTC
  38
  39 config ARCH_DAVINCI_DA850
  40         bool "DA850/OMAP-L138/AM18x based system"
  41         select ARCH_DAVINCI_DA8XX
  42         select ARCH_HAS_CPUFREQ
  43         select CP_INTC
  44
  45 config ARCH_DAVINCI_DA8XX
  46         bool
  47         select CPU_ARM926T
  48
  49 config ARCH_DAVINCI_DM365
  50         bool "DaVinci 365 based system"
  51         select AINTC
  52         select ARCH_DAVINCI_DMx
  53
  54 config ARCH_DAVINCI_TNETV107X
  55         bool "TNETV107X based system"
  56         select CPU_V6
  57         select CP_INTC
  58
  59 comment "DaVinci Board Type"
  60
  61 config MACH_DAVINCI_EVM
  62         bool "TI DM644x EVM"
  63         default ARCH_DAVINCI_DM644x
  64         depends on ARCH_DAVINCI_DM644x
  65         select EEPROM_AT24
  66         select I2C
  67         help
  68           Configure this option to specify the whether the board used
  69           for development is a DM644x EVM
  70
  71 config MACH_SFFSDR
  72         bool "Lyrtech SFFSDR"
  73         depends on ARCH_DAVINCI_DM644x
  74         select EEPROM_AT24
  75         select I2C
  76         help
  77           Say Y here to select the Lyrtech Small Form Factor
  78           Software Defined Radio (SFFSDR) board.
  79
  80 config MACH_NEUROS_OSD2
  81         bool "Neuros OSD2 Open Television Set Top Box"
  82         depends on ARCH_DAVINCI_DM644x
  83         help
  84           Configure this option to specify the whether the board used
  85           for development is a Neuros OSD2 Open Set Top Box.
  86
  87 config MACH_DAVINCI_DM355_EVM
  88         bool "TI DM355 EVM"
  89         default ARCH_DAVINCI_DM355
  90         depends on ARCH_DAVINCI_DM355
  91         help
  92           Configure this option to specify the whether the board used
  93           for development is a DM355 EVM
  94
  95 config MACH_DM355_LEOPARD
  96         bool "DM355 Leopard board"
  97         depends on ARCH_DAVINCI_DM355
  98         help
  99           Configure this option to specify the whether the board used
 100           for development is a DM355 Leopard board.
 101
 102 config MACH_DAVINCI_DM6467_EVM
 103         bool "TI DM6467 EVM"
 104         default ARCH_DAVINCI_DM646x
 105         depends on ARCH_DAVINCI_DM646x
 106         select EEPROM_AT24
 107         select I2C
 108         select MACH_DAVINCI_DM6467TEVM
 109         help
 110           Configure this option to specify the whether the board used
 111           for development is a DM6467 EVM
 112
 113 config MACH_DAVINCI_DM6467TEVM
 114         bool
 115
 116 config MACH_DAVINCI_DM365_EVM
 117         bool "TI DM365 EVM"
 118         default ARCH_DAVINCI_DM365
 119         depends on ARCH_DAVINCI_DM365
 120         select EEPROM_AT24
 121         select I2C
 122         help
 123           Configure this option to specify whether the board used
 124           for development is a DM365 EVM
 125
 126 config MACH_DAVINCI_DA830_EVM
 127         bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 128         default ARCH_DAVINCI_DA830
 129         depends on ARCH_DAVINCI_DA830
 130         select EEPROM_AT24
 131         select GPIO_PCF857X
 132         select I2C
 133         help
 134           Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 135
 136 choice
 137         prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
 138         depends on MACH_DAVINCI_DA830_EVM
 139         help
 140           The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
 141           detected automatically based on successful probe of the I2C
 142           based GPIO expander on that board. This option selected in this
 143           menu has an effect only in case of a successful UI card detection.
 144
 145 config DA830_UI_LCD
 146         bool "LCD"
 147         help
 148           Say Y here to use the LCD as a framebuffer or simple character
 149           display.
 150
 151 config DA830_UI_NAND
 152         bool "NAND flash"
 153         help
 154           Say Y here to use the NAND flash. Do not forget to setup
 155           the switch correctly.
 156 endchoice
 157
 158 config MACH_DAVINCI_DA850_EVM
 159         bool "TI DA850/OMAP-L138/AM18x Reference Platform"
 160         default ARCH_DAVINCI_DA850
 161         depends on ARCH_DAVINCI_DA850
 162         help
 163           Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
 164
 165 choice
 166         prompt "Select peripherals connected to expander on UI board"
 167         depends on MACH_DAVINCI_DA850_EVM
 168         help
 169           The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
 170           EVM is detected automatically based on successful probe of the I2C
 171           based GPIO expander on that card. This option selected in this
 172           menu has an effect only in case of a successful UI card detection.
 173
 174 config DA850_UI_NONE
 175         bool "No peripheral is enabled"
 176         help
 177           Say Y if you do not want to enable any of the peripherals connected
 178           to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
 179
 180 config DA850_UI_RMII
 181         bool "RMII Ethernet PHY"
 182         help
 183           Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
 184           EVM. This PHY is found on the UI daughter card that is supplied with
 185           the EVM.
 186           NOTE: Please take care while choosing this option, MII PHY will
 187           not be functional if RMII mode is selected.
 188
 189 config DA850_UI_SD_VIDEO_PORT
 190         bool "Video Port Interface"
 191         help
 192           Say Y if you want to use Video Port Interface (VPIF) on the
 193           DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
 194           UI daughter card that is supplied with the EVM.
 195
 196 endchoice
 197
 198 config DA850_WL12XX
 199         bool "AM18x wl1271 daughter board"
 200         depends on MACH_DAVINCI_DA850_EVM
 201         help
 202           The wl1271 daughter card for AM18x EVMs is a combo wireless
 203           connectivity add-on card, based on the LS Research TiWi module with
 204           Texas Instruments' wl1271 solution.
 205           Say Y if you want to use a wl1271 expansion card connected to the
 206           AM18x EVM.
 207
 208 config GPIO_PCA953X
 209         default MACH_DAVINCI_DA850_EVM
 210
 211 config KEYBOARD_GPIO_POLLED
 212         default MACH_DAVINCI_DA850_EVM
 213
 214 config MACH_TNETV107X
 215         bool "TI TNETV107X Reference Platform"
 216         default ARCH_DAVINCI_TNETV107X
 217         depends on ARCH_DAVINCI_TNETV107X
 218         help
 219           Say Y here to select the TI TNETV107X Evaluation Module.
 220
 221 config MACH_MITYOMAPL138
 222         bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 223         depends on ARCH_DAVINCI_DA850
 224         select EEPROM_AT24
 225         select I2C
 226         help
 227           Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 228           System on Module.  Information on this SoM may be found at
 229           http://www.mitydsp.com
 230
 231 config MACH_OMAPL138_HAWKBOARD
 232         bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 233         depends on ARCH_DAVINCI_DA850
 234         help
 235           Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
 236           Information of this board may be found at
 237           http://www.hawkboard.org/
 238
 239 config DAVINCI_MUX
 240         bool "DAVINCI multiplexing support"
 241         depends on ARCH_DAVINCI
 242         default y
 243         help
 244           Pin multiplexing support for DAVINCI boards. If your bootloader
 245           sets the multiplexing correctly, say N. Otherwise, or if unsure,
 246           say Y.
 247
 248 config DAVINCI_MUX_DEBUG
 249         bool "Multiplexing debug output"
 250         depends on DAVINCI_MUX
 251         help
 252           Makes the multiplexing functions print out a lot of debug info.
 253           This is useful if you want to find out the correct values of the
 254           multiplexing registers.
 255
 256 config DAVINCI_MUX_WARNINGS
 257         bool "Warn about pins the bootloader didn't set up"
 258         depends on DAVINCI_MUX
 259         help
 260           Choose Y here to warn whenever driver initialization logic needs
 261           to change the pin multiplexing setup. When there are no warnings
 262           printed, it's safe to deselect DAVINCI_MUX for your product.
 263
 264 config DAVINCI_RESET_CLOCKS
 265         bool "Reset unused clocks during boot"
 266         depends on ARCH_DAVINCI
 267         help
 268           Say Y if you want to reset unused clocks during boot.
 269           This option saves power, but assumes all drivers are
 270           using the clock framework. Broken drivers that do not
 271           yet use clock framework may not work with this option.
 272           If you are booting from another operating system, you
 273           probably do not want this option enabled until your
 274           device drivers work properly.
 275
 276 endmenu
 277
 278 endif