arch/arm/mach-davinci/Kconfig

   1 if ARCH_DAVINCI
   2
   3 config AINTC
   4         bool
   5
   6 config CP_INTC
   7         bool
   8         select IRQ_DOMAIN
   9
  10 config ARCH_DAVINCI_DMx
  11         bool
  12         select CPU_ARM926T
  13
  14 menu "TI DaVinci Implementations"
  15
  16 comment "DaVinci Core Type"
  17
  18 config ARCH_DAVINCI_DM644x
  19         bool "DaVinci 644x based system"
  20         select AINTC
  21         select ARCH_DAVINCI_DMx
  22
  23 config ARCH_DAVINCI_DM355
  24         bool "DaVinci 355 based system"
  25         select AINTC
  26         select ARCH_DAVINCI_DMx
  27
  28 config ARCH_DAVINCI_DM646x
  29         bool "DaVinci 646x based system"
  30         select AINTC
  31         select ARCH_DAVINCI_DMx
  32
  33 config ARCH_DAVINCI_DA830
  34         bool "DA830/OMAP-L137/AM17x based system"
  35         depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
  36         select ARCH_DAVINCI_DA8XX
  37         select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
  38         select CP_INTC
  39
  40 config ARCH_DAVINCI_DA850
  41         bool "DA850/OMAP-L138/AM18x based system"
  42         depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
  43         select ARCH_DAVINCI_DA8XX
  44         select CP_INTC
  45
  46 config ARCH_DAVINCI_DA8XX
  47         bool
  48         select CPU_ARM926T
  49
  50 config ARCH_DAVINCI_DM365
  51         bool "DaVinci 365 based system"
  52         select AINTC
  53         select ARCH_DAVINCI_DMx
  54
  55 comment "DaVinci Board Type"
  56
  57 config MACH_DA8XX_DT
  58         bool "Support DA8XX platforms using device tree"
  59         default y
  60         depends on ARCH_DAVINCI_DA8XX
  61         select PINCTRL
  62         help
  63           Say y here to include support for TI DaVinci DA850 based using
  64           Flattened Device Tree. More information at Documentation/devicetree
  65
  66 config MACH_DAVINCI_EVM
  67         bool "TI DM644x EVM"
  68         default ARCH_DAVINCI_DM644x
  69         depends on ARCH_DAVINCI_DM644x
  70         select EEPROM_AT24
  71         select I2C
  72         help
  73           Configure this option to specify the whether the board used
  74           for development is a DM644x EVM
  75
  76 config MACH_SFFSDR
  77         bool "Lyrtech SFFSDR"
  78         depends on ARCH_DAVINCI_DM644x
  79         select EEPROM_AT24
  80         select I2C
  81         help
  82           Say Y here to select the Lyrtech Small Form Factor
  83           Software Defined Radio (SFFSDR) board.
  84
  85 config MACH_NEUROS_OSD2
  86         bool "Neuros OSD2 Open Television Set Top Box"
  87         depends on ARCH_DAVINCI_DM644x
  88         help
  89           Configure this option to specify the whether the board used
  90           for development is a Neuros OSD2 Open Set Top Box.
  91
  92 config MACH_DAVINCI_DM355_EVM
  93         bool "TI DM355 EVM"
  94         default ARCH_DAVINCI_DM355
  95         depends on ARCH_DAVINCI_DM355
  96         help
  97           Configure this option to specify the whether the board used
  98           for development is a DM355 EVM
  99
 100 config MACH_DM355_LEOPARD
 101         bool "DM355 Leopard board"
 102         depends on ARCH_DAVINCI_DM355
 103         help
 104           Configure this option to specify the whether the board used
 105           for development is a DM355 Leopard board.
 106
 107 config MACH_DAVINCI_DM6467_EVM
 108         bool "TI DM6467 EVM"
 109         default ARCH_DAVINCI_DM646x
 110         depends on ARCH_DAVINCI_DM646x
 111         select EEPROM_AT24
 112         select I2C
 113         select MACH_DAVINCI_DM6467TEVM
 114         help
 115           Configure this option to specify the whether the board used
 116           for development is a DM6467 EVM
 117
 118 config MACH_DAVINCI_DM6467TEVM
 119         bool
 120
 121 config MACH_DAVINCI_DM365_EVM
 122         bool "TI DM365 EVM"
 123         default ARCH_DAVINCI_DM365
 124         depends on ARCH_DAVINCI_DM365
 125         select EEPROM_AT24
 126         select I2C
 127         help
 128           Configure this option to specify whether the board used
 129           for development is a DM365 EVM
 130
 131 config MACH_DAVINCI_DA830_EVM
 132         bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 133         default ARCH_DAVINCI_DA830
 134         depends on ARCH_DAVINCI_DA830
 135         select EEPROM_AT24
 136         select GPIO_PCF857X
 137         select I2C
 138         help
 139           Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 140
 141 choice
 142         prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
 143         depends on MACH_DAVINCI_DA830_EVM
 144         help
 145           The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
 146           detected automatically based on successful probe of the I2C
 147           based GPIO expander on that board. This option selected in this
 148           menu has an effect only in case of a successful UI card detection.
 149
 150 config DA830_UI_LCD
 151         bool "LCD"
 152         help
 153           Say Y here to use the LCD as a framebuffer or simple character
 154           display.
 155
 156 config DA830_UI_NAND
 157         bool "NAND flash"
 158         help
 159           Say Y here to use the NAND flash. Do not forget to setup
 160           the switch correctly.
 161 endchoice
 162
 163 config MACH_DAVINCI_DA850_EVM
 164         bool "TI DA850/OMAP-L138/AM18x Reference Platform"
 165         default ARCH_DAVINCI_DA850
 166         depends on ARCH_DAVINCI_DA850
 167         help
 168           Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
 169
 170 choice
 171         prompt "Select peripherals connected to expander on UI board"
 172         depends on MACH_DAVINCI_DA850_EVM
 173         help
 174           The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
 175           EVM is detected automatically based on successful probe of the I2C
 176           based GPIO expander on that card. This option selected in this
 177           menu has an effect only in case of a successful UI card detection.
 178
 179 config DA850_UI_NONE
 180         bool "No peripheral is enabled"
 181         help
 182           Say Y if you do not want to enable any of the peripherals connected
 183           to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
 184
 185 config DA850_UI_RMII
 186         bool "RMII Ethernet PHY"
 187         help
 188           Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
 189           EVM. This PHY is found on the UI daughter card that is supplied with
 190           the EVM.
 191           NOTE: Please take care while choosing this option, MII PHY will
 192           not be functional if RMII mode is selected.
 193
 194 config DA850_UI_SD_VIDEO_PORT
 195         bool "Video Port Interface"
 196         help
 197           Say Y if you want to use Video Port Interface (VPIF) on the
 198           DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
 199           UI daughter card that is supplied with the EVM.
 200
 201 endchoice
 202
 203 config MACH_MITYOMAPL138
 204         bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 205         depends on ARCH_DAVINCI_DA850
 206         select EEPROM_AT24
 207         select I2C
 208         help
 209           Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 210           System on Module.  Information on this SoM may be found at
 211           http://www.mitydsp.com
 212
 213 config MACH_OMAPL138_HAWKBOARD
 214         bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 215         depends on ARCH_DAVINCI_DA850
 216         help
 217           Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
 218           Information of this board may be found at
 219           http://www.hawkboard.org/
 220
 221 config DAVINCI_MUX
 222         bool "DAVINCI multiplexing support"
 223         depends on ARCH_DAVINCI
 224         default y
 225         help
 226           Pin multiplexing support for DAVINCI boards. If your bootloader
 227           sets the multiplexing correctly, say N. Otherwise, or if unsure,
 228           say Y.
 229
 230 config DAVINCI_MUX_DEBUG
 231         bool "Multiplexing debug output"
 232         depends on DAVINCI_MUX
 233         help
 234           Makes the multiplexing functions print out a lot of debug info.
 235           This is useful if you want to find out the correct values of the
 236           multiplexing registers.
 237
 238 config DAVINCI_MUX_WARNINGS
 239         bool "Warn about pins the bootloader didn't set up"
 240         depends on DAVINCI_MUX
 241         help
 242           Choose Y here to warn whenever driver initialization logic needs
 243           to change the pin multiplexing setup. When there are no warnings
 244           printed, it's safe to deselect DAVINCI_MUX for your product.
 245
 246 config DAVINCI_RESET_CLOCKS
 247         bool "Reset unused clocks during boot"
 248         depends on ARCH_DAVINCI
 249         help
 250           Say Y if you want to reset unused clocks during boot.
 251           This option saves power, but assumes all drivers are
 252           using the clock framework. Broken drivers that do not
 253           yet use clock framework may not work with this option.
 254           If you are booting from another operating system, you
 255           probably do not want this option enabled until your
 256           device drivers work properly.
 257
 258 endmenu
 259
 260 endif