Davinci: configurable pll divider mask
[deliverable/linux.git] / arch / arm / mach-davinci / clock.h
1 /*
2 * TI DaVinci clock definitions
3 *
4 * Copyright (C) 2006-2007 Texas Instruments.
5 * Copyright (C) 2008-2009 Deep Root Systems, LLC
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12 #ifndef __ARCH_ARM_DAVINCI_CLOCK_H
13 #define __ARCH_ARM_DAVINCI_CLOCK_H
14
15 #define DAVINCI_PLL1_BASE 0x01c40800
16 #define DAVINCI_PLL2_BASE 0x01c40c00
17 #define MAX_PLL 2
18
19 /* PLL/Reset register offsets */
20 #define PLLCTL 0x100
21 #define PLLCTL_PLLEN BIT(0)
22 #define PLLCTL_PLLPWRDN BIT(1)
23 #define PLLCTL_PLLRST BIT(3)
24 #define PLLCTL_PLLDIS BIT(4)
25 #define PLLCTL_PLLENSRC BIT(5)
26 #define PLLCTL_CLKMODE BIT(8)
27
28 #define PLLM 0x110
29 #define PLLM_PLLM_MASK 0xff
30
31 #define PREDIV 0x114
32 #define PLLDIV1 0x118
33 #define PLLDIV2 0x11c
34 #define PLLDIV3 0x120
35 #define POSTDIV 0x128
36 #define BPDIV 0x12c
37 #define PLLCMD 0x138
38 #define PLLSTAT 0x13c
39 #define PLLALNCTL 0x140
40 #define PLLDCHANGE 0x144
41 #define PLLCKEN 0x148
42 #define PLLCKSTAT 0x14c
43 #define PLLSYSTAT 0x150
44 #define PLLDIV4 0x160
45 #define PLLDIV5 0x164
46 #define PLLDIV6 0x168
47 #define PLLDIV7 0x16c
48 #define PLLDIV8 0x170
49 #define PLLDIV9 0x174
50 #define PLLDIV_EN BIT(15)
51 #define PLLDIV_RATIO_MASK 0x1f
52
53 /*
54 * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN
55 * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us
56 * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input
57 * is ~25MHz. Units are micro seconds.
58 */
59 #define PLL_BYPASS_TIME 1
60 /* From OMAP-L138 datasheet table 6-4. Units are micro seconds */
61 #define PLL_RESET_TIME 1
62 /*
63 * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4
64 * Units are micro seconds.
65 */
66 #define PLL_LOCK_TIME 20
67
68 #ifndef __ASSEMBLER__
69
70 #include <linux/list.h>
71 #include <asm/clkdev.h>
72
73 struct pll_data {
74 u32 phys_base;
75 void __iomem *base;
76 u32 num;
77 u32 flags;
78 u32 input_rate;
79 u32 div_ratio_mask;
80 };
81 #define PLL_HAS_PREDIV 0x01
82 #define PLL_HAS_POSTDIV 0x02
83
84 struct clk {
85 struct list_head node;
86 struct module *owner;
87 const char *name;
88 unsigned long rate;
89 u8 usecount;
90 u8 lpsc;
91 u8 gpsc;
92 u32 flags;
93 struct clk *parent;
94 struct list_head children; /* list of children */
95 struct list_head childnode; /* parent's child list node */
96 struct pll_data *pll_data;
97 u32 div_reg;
98 unsigned long (*recalc) (struct clk *);
99 int (*set_rate) (struct clk *clk, unsigned long rate);
100 int (*round_rate) (struct clk *clk, unsigned long rate);
101 };
102
103 /* Clock flags: SoC-specific flags start at BIT(16) */
104 #define ALWAYS_ENABLED BIT(1)
105 #define CLK_PSC BIT(2)
106 #define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
107 #define CLK_PLL BIT(4) /* PLL-derived clock */
108 #define PRE_PLL BIT(5) /* source is before PLL mult/div */
109 #define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */
110
111 #define CLK(dev, con, ck) \
112 { \
113 .dev_id = dev, \
114 .con_id = con, \
115 .clk = ck, \
116 } \
117
118 int davinci_clk_init(struct clk_lookup *clocks);
119 int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
120 unsigned int mult, unsigned int postdiv);
121
122 extern struct platform_device davinci_wdt_device;
123
124 #endif
125
126 #endif
This page took 0.140208 seconds and 5 git commands to generate.