arch/arm/mach-ep93xx/Kconfig

   1 if ARCH_EP93XX
   2
   3 menu "Cirrus EP93xx Implementation Options"
   4
   5 config EP93XX_SOC_COMMON
   6         bool
   7         default y
   8         select SOC_BUS
   9         select LEDS_GPIO_REGISTER
  10
  11 config CRUNCH
  12         bool "Support for MaverickCrunch"
  13         help
  14           Enable kernel support for MaverickCrunch.
  15
  16 comment "EP93xx Platforms"
  17
  18 choice
  19         prompt "EP93xx first SDRAM bank selection"
  20         default EP93XX_SDCE3_SYNC_PHYS_OFFSET
  21
  22 config EP93XX_SDCE3_SYNC_PHYS_OFFSET
  23         bool "0x00000000 - SDCE3/SyncBoot"
  24         help
  25           Select this option if you want support for EP93xx boards with the
  26           first SDRAM bank at 0x00000000.
  27
  28 config EP93XX_SDCE0_PHYS_OFFSET
  29         bool "0xc0000000 - SDCEO"
  30         help
  31           Select this option if you want support for EP93xx boards with the
  32           first SDRAM bank at 0xc0000000.
  33
  34 config EP93XX_SDCE1_PHYS_OFFSET
  35         bool "0xd0000000 - SDCE1"
  36         help
  37           Select this option if you want support for EP93xx boards with the
  38           first SDRAM bank at 0xd0000000.
  39
  40 config EP93XX_SDCE2_PHYS_OFFSET
  41         bool "0xe0000000 - SDCE2"
  42         help
  43           Select this option if you want support for EP93xx boards with the
  44           first SDRAM bank at 0xe0000000.
  45
  46 config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
  47         bool "0xf0000000 - SDCE3/AsyncBoot"
  48         help
  49           Select this option if you want support for EP93xx boards with the
  50           first SDRAM bank at 0xf0000000.
  51
  52 endchoice
  53
  54 config MACH_ADSSPHERE
  55         bool "Support ADS Sphere"
  56         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
  57         help
  58           Say 'Y' here if you want your kernel to support the ADS
  59           Sphere board.
  60
  61 config MACH_EDB93XX
  62         bool
  63
  64 config MACH_EDB9301
  65         bool "Support Cirrus Logic EDB9301"
  66         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
  67         select MACH_EDB93XX
  68         help
  69           Say 'Y' here if you want your kernel to support the Cirrus
  70           Logic EDB9301 Evaluation Board.
  71
  72 config MACH_EDB9302
  73         bool "Support Cirrus Logic EDB9302"
  74         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
  75         select MACH_EDB93XX
  76         help
  77           Say 'Y' here if you want your kernel to support the Cirrus
  78           Logic EDB9302 Evaluation Board.
  79
  80 config MACH_EDB9302A
  81         bool "Support Cirrus Logic EDB9302A"
  82         depends on EP93XX_SDCE0_PHYS_OFFSET
  83         select MACH_EDB93XX
  84         help
  85           Say 'Y' here if you want your kernel to support the Cirrus
  86           Logic EDB9302A Evaluation Board.
  87
  88 config MACH_EDB9307
  89         bool "Support Cirrus Logic EDB9307"
  90         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
  91         select MACH_EDB93XX
  92         help
  93           Say 'Y' here if you want your kernel to support the Cirrus
  94           Logic EDB9307 Evaluation Board.
  95
  96 config MACH_EDB9307A
  97         bool "Support Cirrus Logic EDB9307A"
  98         depends on EP93XX_SDCE0_PHYS_OFFSET
  99         select MACH_EDB93XX
 100         help
 101           Say 'Y' here if you want your kernel to support the Cirrus
 102           Logic EDB9307A Evaluation Board.
 103
 104 config MACH_EDB9312
 105         bool "Support Cirrus Logic EDB9312"
 106         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 107         select MACH_EDB93XX
 108         help
 109           Say 'Y' here if you want your kernel to support the Cirrus
 110           Logic EDB9312 Evaluation Board.
 111
 112 config MACH_EDB9315
 113         bool "Support Cirrus Logic EDB9315"
 114         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 115         select MACH_EDB93XX
 116         help
 117           Say 'Y' here if you want your kernel to support the Cirrus
 118           Logic EDB9315 Evaluation Board.
 119
 120 config MACH_EDB9315A
 121         bool "Support Cirrus Logic EDB9315A"
 122         depends on EP93XX_SDCE0_PHYS_OFFSET
 123         select MACH_EDB93XX
 124         help
 125           Say 'Y' here if you want your kernel to support the Cirrus
 126           Logic EDB9315A Evaluation Board.
 127
 128 config MACH_GESBC9312
 129         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 130         bool "Support Glomation GESBC-9312-sx"
 131         help
 132           Say 'Y' here if you want your kernel to support the Glomation
 133           GESBC-9312-sx board.
 134
 135 config MACH_MICRO9
 136         bool
 137
 138 config MACH_MICRO9H
 139         bool "Support Contec Micro9-High"
 140         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 141         select MACH_MICRO9
 142         help
 143           Say 'Y' here if you want your kernel to support the
 144           Contec Micro9-High board.
 145
 146 config MACH_MICRO9M
 147         bool "Support Contec Micro9-Mid"
 148         depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 149         select MACH_MICRO9
 150         help
 151           Say 'Y' here if you want your kernel to support the
 152           Contec Micro9-Mid board.
 153
 154 config MACH_MICRO9L
 155         bool "Support Contec Micro9-Lite"
 156         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 157         select MACH_MICRO9
 158         help
 159           Say 'Y' here if you want your kernel to support the
 160           Contec Micro9-Lite board.
 161
 162 config MACH_MICRO9S
 163         bool "Support Contec Micro9-Slim"
 164         depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 165         select MACH_MICRO9
 166         help
 167           Say 'Y' here if you want your kernel to support the
 168           Contec Micro9-Slim board.
 169
 170 config MACH_SIM_ONE
 171         bool "Support Simplemachines Sim.One board"
 172         depends on EP93XX_SDCE0_PHYS_OFFSET
 173         help
 174           Say 'Y' here if you want your kernel to support the
 175           Simplemachines Sim.One board.
 176
 177 config MACH_SNAPPER_CL15
 178         bool "Support Bluewater Systems Snapper CL15 Module"
 179         depends on EP93XX_SDCE0_PHYS_OFFSET
 180         help
 181           Say 'Y' here if you want your kernel to support the Bluewater
 182           Systems Snapper CL15 Module.
 183
 184 config MACH_TS72XX
 185         bool "Support Technologic Systems TS-72xx SBC"
 186         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 187         help
 188           Say 'Y' here if you want your kernel to support the
 189           Technologic Systems TS-72xx board.
 190
 191 config MACH_VISION_EP9307
 192         bool "Support Vision Engraving Systems EP9307 SoM"
 193         depends on EP93XX_SDCE0_PHYS_OFFSET
 194         help
 195           Say 'Y' here if you want your kernel to support the
 196           Vision Engraving Systems EP9307 SoM.
 197
 198 endmenu
 199
 200 endif