arch/arm/mach-ep93xx/timer-ep93xx.c

   1 #include <linux/kernel.h>
   2 #include <linux/init.h>
   3 #include <linux/clocksource.h>
   4 #include <linux/clockchips.h>
   5 #include <linux/sched_clock.h>
   6 #include <linux/interrupt.h>
   7 #include <linux/irq.h>
   8 #include <linux/io.h>
   9 #include <asm/mach/time.h>
  10 #include "soc.h"
  11
  12 /*************************************************************************
  13  * Timer handling for EP93xx
  14  *************************************************************************
  15  * The ep93xx has four internal timers.  Timers 1, 2 (both 16 bit) and
  16  * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
  17  * an interrupt on underflow.  Timer 4 (40 bit) counts down at 983.04 kHz,
  18  * is free-running, and can't generate interrupts.
  19  *
  20  * The 508 kHz timers are ideal for use for the timer interrupt, as the
  21  * most common values of HZ divide 508 kHz nicely.  We pick the 32 bit
  22  * timer (timer 3) to get as long sleep intervals as possible when using
  23  * CONFIG_NO_HZ.
  24  *
  25  * The higher clock rate of timer 4 makes it a better choice than the
  26  * other timers for use as clock source and for sched_clock(), providing
  27  * a stable 40 bit time base.
  28  *************************************************************************
  29  */
  30 #define EP93XX_TIMER_REG(x)             (EP93XX_TIMER_BASE + (x))
  31 #define EP93XX_TIMER1_LOAD              EP93XX_TIMER_REG(0x00)
  32 #define EP93XX_TIMER1_VALUE             EP93XX_TIMER_REG(0x04)
  33 #define EP93XX_TIMER1_CONTROL           EP93XX_TIMER_REG(0x08)
  34 #define EP93XX_TIMER123_CONTROL_ENABLE  (1 << 7)
  35 #define EP93XX_TIMER123_CONTROL_MODE    (1 << 6)
  36 #define EP93XX_TIMER123_CONTROL_CLKSEL  (1 << 3)
  37 #define EP93XX_TIMER1_CLEAR             EP93XX_TIMER_REG(0x0c)
  38 #define EP93XX_TIMER2_LOAD              EP93XX_TIMER_REG(0x20)
  39 #define EP93XX_TIMER2_VALUE             EP93XX_TIMER_REG(0x24)
  40 #define EP93XX_TIMER2_CONTROL           EP93XX_TIMER_REG(0x28)
  41 #define EP93XX_TIMER2_CLEAR             EP93XX_TIMER_REG(0x2c)
  42 #define EP93XX_TIMER4_VALUE_LOW         EP93XX_TIMER_REG(0x60)
  43 #define EP93XX_TIMER4_VALUE_HIGH        EP93XX_TIMER_REG(0x64)
  44 #define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
  45 #define EP93XX_TIMER3_LOAD              EP93XX_TIMER_REG(0x80)
  46 #define EP93XX_TIMER3_VALUE             EP93XX_TIMER_REG(0x84)
  47 #define EP93XX_TIMER3_CONTROL           EP93XX_TIMER_REG(0x88)
  48 #define EP93XX_TIMER3_CLEAR             EP93XX_TIMER_REG(0x8c)
  49
  50 #define EP93XX_TIMER123_RATE            508469
  51 #define EP93XX_TIMER4_RATE              983040
  52
  53 static u64 notrace ep93xx_read_sched_clock(void)
  54 {
  55         u64 ret;
  56
  57         ret = readl(EP93XX_TIMER4_VALUE_LOW);
  58         ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
  59         return ret;
  60 }
  61
  62 cycle_t ep93xx_clocksource_read(struct clocksource *c)
  63 {
  64         u64 ret;
  65
  66         ret = readl(EP93XX_TIMER4_VALUE_LOW);
  67         ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
  68         return (cycle_t) ret;
  69 }
  70
  71 static int ep93xx_clkevt_set_next_event(unsigned long next,
  72                                         struct clock_event_device *evt)
  73 {
  74         /* Default mode: periodic, off, 508 kHz */
  75         u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
  76                     EP93XX_TIMER123_CONTROL_CLKSEL;
  77
  78         /* Clear timer */
  79         writel(tmode, EP93XX_TIMER3_CONTROL);
  80
  81         /* Set next event */
  82         writel(next, EP93XX_TIMER3_LOAD);
  83         writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
  84                EP93XX_TIMER3_CONTROL);
  85         return 0;
  86 }
  87
  88
  89 static int ep93xx_clkevt_shutdown(struct clock_event_device *evt)
  90 {
  91         /* Disable timer */
  92         writel(0, EP93XX_TIMER3_CONTROL);
  93
  94         return 0;
  95 }
  96
  97 static struct clock_event_device ep93xx_clockevent = {
  98         .name                   = "timer1",
  99         .features               = CLOCK_EVT_FEAT_ONESHOT,
 100         .set_state_shutdown     = ep93xx_clkevt_shutdown,
 101         .set_state_oneshot      = ep93xx_clkevt_shutdown,
 102         .tick_resume            = ep93xx_clkevt_shutdown,
 103         .set_next_event         = ep93xx_clkevt_set_next_event,
 104         .rating                 = 300,
 105 };
 106
 107 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 108 {
 109         struct clock_event_device *evt = dev_id;
 110
 111         /* Writing any value clears the timer interrupt */
 112         writel(1, EP93XX_TIMER3_CLEAR);
 113
 114         evt->event_handler(evt);
 115
 116         return IRQ_HANDLED;
 117 }
 118
 119 static struct irqaction ep93xx_timer_irq = {
 120         .name           = "ep93xx timer",
 121         .flags          = IRQF_TIMER | IRQF_IRQPOLL,
 122         .handler        = ep93xx_timer_interrupt,
 123         .dev_id         = &ep93xx_clockevent,
 124 };
 125
 126 void __init ep93xx_timer_init(void)
 127 {
 128         /* Enable and register clocksource and sched_clock on timer 4 */
 129         writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
 130                EP93XX_TIMER4_VALUE_HIGH);
 131         clocksource_mmio_init(NULL, "timer4",
 132                               EP93XX_TIMER4_RATE, 200, 40,
 133                               ep93xx_clocksource_read);
 134         sched_clock_register(ep93xx_read_sched_clock, 40,
 135                              EP93XX_TIMER4_RATE);
 136
 137         /* Set up clockevent on timer 3 */
 138         setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
 139         clockevents_config_and_register(&ep93xx_clockevent,
 140                                         EP93XX_TIMER123_RATE,
 141                                         1,
 142                                         0xffffffffU);
 143 }