arch/arm/mach-imx/Kconfig

   1 config IMX_HAVE_DMA_V1
   2         bool
   3
   4 config HAVE_IMX_GPC
   5         bool
   6
   7 config HAVE_IMX_MMDC
   8         bool
   9
  10 config HAVE_IMX_SRC
  11         bool
  12
  13 config ARCH_MX1
  14         bool
  15
  16 config MACH_MX21
  17         bool
  18
  19 config ARCH_MX25
  20         bool
  21
  22 config MACH_MX27
  23         bool
  24
  25 config ARCH_MX5
  26         bool
  27
  28 config ARCH_MX50
  29         bool
  30
  31 config ARCH_MX51
  32         bool
  33
  34 config ARCH_MX53
  35         bool
  36
  37 config SOC_IMX1
  38         bool
  39         select ARCH_MX1
  40         select CPU_ARM920T
  41         select IMX_HAVE_DMA_V1
  42         select IMX_HAVE_IOMUX_V1
  43         select MXC_AVIC
  44
  45 config SOC_IMX21
  46         bool
  47         select MACH_MX21
  48         select CPU_ARM926T
  49         select ARCH_MXC_AUDMUX_V1
  50         select IMX_HAVE_DMA_V1
  51         select IMX_HAVE_IOMUX_V1
  52         select MXC_AVIC
  53
  54 config SOC_IMX25
  55         bool
  56         select ARCH_MX25
  57         select CPU_ARM926T
  58         select ARCH_MXC_AUDMUX_V2
  59         select ARCH_MXC_IOMUX_V3
  60         select MXC_AVIC
  61
  62 config SOC_IMX27
  63         bool
  64         select MACH_MX27
  65         select CPU_ARM926T
  66         select ARCH_MXC_AUDMUX_V1
  67         select IMX_HAVE_DMA_V1
  68         select IMX_HAVE_IOMUX_V1
  69         select MXC_AVIC
  70
  71 config SOC_IMX31
  72         bool
  73         select CPU_V6
  74         select IMX_HAVE_PLATFORM_MXC_RNGA
  75         select ARCH_MXC_AUDMUX_V2
  76         select MXC_AVIC
  77         select SMP_ON_UP if SMP
  78
  79 config SOC_IMX35
  80         bool
  81         select CPU_V6
  82         select ARCH_MXC_IOMUX_V3
  83         select ARCH_MXC_AUDMUX_V2
  84         select HAVE_EPIT
  85         select MXC_AVIC
  86         select SMP_ON_UP if SMP
  87
  88 config SOC_IMX5
  89         select CPU_V7
  90         select MXC_TZIC
  91         select ARCH_MXC_IOMUX_V3
  92         select ARCH_MXC_AUDMUX_V2
  93         select ARCH_HAS_CPUFREQ
  94         select ARCH_MX5
  95         bool
  96
  97 config SOC_IMX50
  98         bool
  99         select SOC_IMX5
 100         select ARCH_MX50
 101
 102 config  SOC_IMX51
 103         bool
 104         select SOC_IMX5
 105         select ARCH_MX5
 106         select ARCH_MX51
 107
 108 config  SOC_IMX53
 109         bool
 110         select SOC_IMX5
 111         select ARCH_MX5
 112         select ARCH_MX53
 113
 114 if ARCH_IMX_V4_V5
 115
 116 comment "MX1 platforms:"
 117 config MACH_MXLADS
 118         bool
 119
 120 config ARCH_MX1ADS
 121         bool "MX1ADS platform"
 122         select MACH_MXLADS
 123         select SOC_IMX1
 124         select IMX_HAVE_PLATFORM_IMX_I2C
 125         select IMX_HAVE_PLATFORM_IMX_UART
 126         help
 127           Say Y here if you are using Motorola MX1ADS/MXLADS boards
 128
 129 config MACH_SCB9328
 130         bool "Synertronixx scb9328"
 131         select IMX_HAVE_PLATFORM_IMX_UART
 132         help
 133           Say Y here if you are using a Synertronixx scb9328 board
 134
 135 config MACH_APF9328
 136         bool "APF9328"
 137         select SOC_IMX1
 138         select IMX_HAVE_PLATFORM_IMX_I2C
 139         select IMX_HAVE_PLATFORM_IMX_UART
 140         help
 141           Say Yes here if you are using the Armadeus APF9328 development board
 142
 143 comment "MX21 platforms:"
 144
 145 config MACH_MX21ADS
 146         bool "MX21ADS platform"
 147         select SOC_IMX21
 148         select IMX_HAVE_PLATFORM_IMX_FB
 149         select IMX_HAVE_PLATFORM_IMX_UART
 150         select IMX_HAVE_PLATFORM_MXC_MMC
 151         select IMX_HAVE_PLATFORM_MXC_NAND
 152         help
 153           Include support for MX21ADS platform. This includes specific
 154           configurations for the board and its peripherals.
 155
 156 comment "MX25 platforms:"
 157
 158 config MACH_MX25_3DS
 159         bool "Support MX25PDK (3DS) Platform"
 160         select SOC_IMX25
 161         select IMX_HAVE_PLATFORM_FLEXCAN
 162         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 163         select IMX_HAVE_PLATFORM_IMX2_WDT
 164         select IMX_HAVE_PLATFORM_IMXDI_RTC
 165         select IMX_HAVE_PLATFORM_IMX_I2C
 166         select IMX_HAVE_PLATFORM_IMX_FB
 167         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 168         select IMX_HAVE_PLATFORM_IMX_UART
 169         select IMX_HAVE_PLATFORM_MXC_EHCI
 170         select IMX_HAVE_PLATFORM_MXC_NAND
 171         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 172
 173 config MACH_EUKREA_CPUIMX25SD
 174         bool "Support Eukrea CPUIMX25 Platform"
 175         select SOC_IMX25
 176         select IMX_HAVE_PLATFORM_FLEXCAN
 177         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 178         select IMX_HAVE_PLATFORM_IMXDI_RTC
 179         select IMX_HAVE_PLATFORM_IMX_FB
 180         select IMX_HAVE_PLATFORM_IMX_I2C
 181         select IMX_HAVE_PLATFORM_IMX_UART
 182         select IMX_HAVE_PLATFORM_MXC_EHCI
 183         select IMX_HAVE_PLATFORM_MXC_NAND
 184         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 185         select MXC_ULPI if USB_ULPI
 186
 187 choice
 188         prompt "Baseboard"
 189         depends on MACH_EUKREA_CPUIMX25SD
 190         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 191
 192 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 193         bool "Eukrea MBIMXSD development board"
 194         select IMX_HAVE_PLATFORM_GPIO_KEYS
 195         select IMX_HAVE_PLATFORM_IMX_SSI
 196         select LEDS_GPIO_REGISTER
 197         help
 198           This adds board specific devices that can be found on Eukrea's
 199           MBIMXSD evaluation board.
 200
 201 endchoice
 202
 203 comment "MX27 platforms:"
 204
 205 config MACH_MX27ADS
 206         bool "MX27ADS platform"
 207         select SOC_IMX27
 208         select IMX_HAVE_PLATFORM_IMX_FB
 209         select IMX_HAVE_PLATFORM_IMX_I2C
 210         select IMX_HAVE_PLATFORM_IMX_UART
 211         select IMX_HAVE_PLATFORM_MXC_MMC
 212         select IMX_HAVE_PLATFORM_MXC_NAND
 213         select IMX_HAVE_PLATFORM_MXC_W1
 214         help
 215           Include support for MX27ADS platform. This includes specific
 216           configurations for the board and its peripherals.
 217
 218 config MACH_PCM038
 219         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 220         select SOC_IMX27
 221         select IMX_HAVE_PLATFORM_IMX2_WDT
 222         select IMX_HAVE_PLATFORM_IMX_I2C
 223         select IMX_HAVE_PLATFORM_IMX_UART
 224         select IMX_HAVE_PLATFORM_MXC_EHCI
 225         select IMX_HAVE_PLATFORM_MXC_NAND
 226         select IMX_HAVE_PLATFORM_MXC_W1
 227         select IMX_HAVE_PLATFORM_SPI_IMX
 228         select MXC_ULPI if USB_ULPI
 229         help
 230           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 231           includes specific configurations for the module and its peripherals.
 232
 233 choice
 234         prompt "Baseboard"
 235         depends on MACH_PCM038
 236         default MACH_PCM970_BASEBOARD
 237
 238 config MACH_PCM970_BASEBOARD
 239         bool "PHYTEC PCM970 development board"
 240         select IMX_HAVE_PLATFORM_IMX_FB
 241         select IMX_HAVE_PLATFORM_MXC_MMC
 242         help
 243           This adds board specific devices that can be found on Phytec's
 244           PCM970 evaluation board.
 245
 246 endchoice
 247
 248 config MACH_CPUIMX27
 249         bool "Eukrea CPUIMX27 module"
 250         select SOC_IMX27
 251         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 252         select IMX_HAVE_PLATFORM_IMX2_WDT
 253         select IMX_HAVE_PLATFORM_IMX_I2C
 254         select IMX_HAVE_PLATFORM_IMX_UART
 255         select IMX_HAVE_PLATFORM_MXC_EHCI
 256         select IMX_HAVE_PLATFORM_MXC_NAND
 257         select IMX_HAVE_PLATFORM_MXC_W1
 258         select MXC_ULPI if USB_ULPI
 259         help
 260           Include support for Eukrea CPUIMX27 platform. This includes
 261           specific configurations for the module and its peripherals.
 262
 263 config MACH_EUKREA_CPUIMX27_USESDHC2
 264         bool "CPUIMX27 integrates SDHC2 module"
 265         depends on MACH_CPUIMX27
 266         select IMX_HAVE_PLATFORM_MXC_MMC
 267         help
 268           This adds support for the internal SDHC2 used on CPUIMX27
 269           for wifi or eMMC.
 270
 271 config MACH_EUKREA_CPUIMX27_USEUART4
 272         bool "CPUIMX27 integrates UART4 module"
 273         depends on MACH_CPUIMX27
 274         help
 275           This adds support for the internal UART4 used on CPUIMX27
 276           for bluetooth.
 277
 278 choice
 279         prompt "Baseboard"
 280         depends on MACH_CPUIMX27
 281         default MACH_EUKREA_MBIMX27_BASEBOARD
 282
 283 config MACH_EUKREA_MBIMX27_BASEBOARD
 284         bool "Eukrea MBIMX27 development board"
 285         select IMX_HAVE_PLATFORM_IMX_FB
 286         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 287         select IMX_HAVE_PLATFORM_IMX_SSI
 288         select IMX_HAVE_PLATFORM_IMX_UART
 289         select IMX_HAVE_PLATFORM_MXC_MMC
 290         select IMX_HAVE_PLATFORM_SPI_IMX
 291         select LEDS_GPIO_REGISTER
 292         help
 293           This adds board specific devices that can be found on Eukrea's
 294           MBIMX27 evaluation board.
 295
 296 endchoice
 297
 298 config MACH_MX27_3DS
 299         bool "MX27PDK platform"
 300         select SOC_IMX27
 301         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 302         select IMX_HAVE_PLATFORM_IMX2_WDT
 303         select IMX_HAVE_PLATFORM_IMX_FB
 304         select IMX_HAVE_PLATFORM_IMX_I2C
 305         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 306         select IMX_HAVE_PLATFORM_IMX_UART
 307         select IMX_HAVE_PLATFORM_MXC_EHCI
 308         select IMX_HAVE_PLATFORM_MXC_MMC
 309         select IMX_HAVE_PLATFORM_SPI_IMX
 310         select MXC_DEBUG_BOARD
 311         select MXC_ULPI if USB_ULPI
 312         help
 313           Include support for MX27PDK platform. This includes specific
 314           configurations for the board and its peripherals.
 315
 316 config MACH_IMX27_VISSTRIM_M10
 317         bool "Vista Silicon i.MX27 Visstrim_m10"
 318         select SOC_IMX27
 319         select IMX_HAVE_PLATFORM_GPIO_KEYS
 320         select IMX_HAVE_PLATFORM_IMX_I2C
 321         select IMX_HAVE_PLATFORM_IMX_SSI
 322         select IMX_HAVE_PLATFORM_IMX_UART
 323         select IMX_HAVE_PLATFORM_MX2_CAMERA
 324         select IMX_HAVE_PLATFORM_MXC_EHCI
 325         select IMX_HAVE_PLATFORM_MXC_MMC
 326         select LEDS_GPIO_REGISTER
 327         help
 328           Include support for Visstrim_m10 platform and its different variants.
 329           This includes specific configurations for the board and its
 330           peripherals.
 331
 332 config MACH_IMX27LITE
 333         bool "LogicPD MX27 LITEKIT platform"
 334         select SOC_IMX27
 335         select IMX_HAVE_PLATFORM_IMX_UART
 336         select IMX_HAVE_PLATFORM_IMX_SSI
 337         help
 338           Include support for MX27 LITEKIT platform. This includes specific
 339           configurations for the board and its peripherals.
 340
 341 config MACH_PCA100
 342         bool "Phytec phyCARD-s (pca100)"
 343         select SOC_IMX27
 344         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 345         select IMX_HAVE_PLATFORM_IMX2_WDT
 346         select IMX_HAVE_PLATFORM_IMX_FB
 347         select IMX_HAVE_PLATFORM_IMX_I2C
 348         select IMX_HAVE_PLATFORM_IMX_SSI
 349         select IMX_HAVE_PLATFORM_IMX_UART
 350         select IMX_HAVE_PLATFORM_MXC_EHCI
 351         select IMX_HAVE_PLATFORM_MXC_MMC
 352         select IMX_HAVE_PLATFORM_MXC_NAND
 353         select IMX_HAVE_PLATFORM_MXC_W1
 354         select IMX_HAVE_PLATFORM_SPI_IMX
 355         select MXC_ULPI if USB_ULPI
 356         help
 357           Include support for phyCARD-s (aka pca100) platform. This
 358           includes specific configurations for the module and its peripherals.
 359
 360 config MACH_MXT_TD60
 361         bool "Maxtrack i-MXT TD60"
 362         select SOC_IMX27
 363         select IMX_HAVE_PLATFORM_IMX_FB
 364         select IMX_HAVE_PLATFORM_IMX_I2C
 365         select IMX_HAVE_PLATFORM_IMX_UART
 366         select IMX_HAVE_PLATFORM_MXC_MMC
 367         select IMX_HAVE_PLATFORM_MXC_NAND
 368         help
 369           Include support for i-MXT (aka td60) platform. This
 370           includes specific configurations for the module and its peripherals.
 371
 372 config MACH_IMX27IPCAM
 373         bool "IMX27 IPCAM platform"
 374         select SOC_IMX27
 375         select IMX_HAVE_PLATFORM_IMX2_WDT
 376         select IMX_HAVE_PLATFORM_IMX_UART
 377         help
 378           Include support for IMX27 IPCAM platform. This includes specific
 379           configurations for the board and its peripherals.
 380
 381 endif
 382
 383 if ARCH_IMX_V6_V7
 384
 385 comment "MX31 platforms:"
 386
 387 config MACH_MX31ADS
 388         bool "Support MX31ADS platforms"
 389         select SOC_IMX31
 390         select IMX_HAVE_PLATFORM_IMX_I2C
 391         select IMX_HAVE_PLATFORM_IMX_SSI
 392         select IMX_HAVE_PLATFORM_IMX_UART
 393         default y
 394         help
 395           Include support for MX31ADS platform. This includes specific
 396           configurations for the board and its peripherals.
 397
 398 config MACH_MX31ADS_WM1133_EV1
 399         bool "Support Wolfson Microelectronics 1133-EV1 module"
 400         depends on MACH_MX31ADS
 401         depends on MFD_WM8350_I2C
 402         depends on REGULATOR_WM8350
 403         select MFD_WM8350_CONFIG_MODE_0
 404         select MFD_WM8352_CONFIG_MODE_0
 405         help
 406           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 407           and audio module for the MX31ADS platform.
 408
 409 config MACH_MX31LILLY
 410         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 411         select SOC_IMX31
 412         select IMX_HAVE_PLATFORM_IMX_UART
 413         select IMX_HAVE_PLATFORM_IPU_CORE
 414         select IMX_HAVE_PLATFORM_MXC_EHCI
 415         select IMX_HAVE_PLATFORM_MXC_MMC
 416         select IMX_HAVE_PLATFORM_SPI_IMX
 417         select MXC_ULPI if USB_ULPI
 418         help
 419           Include support for mx31 based LILLY1131 modules. This includes
 420           specific configurations for the board and its peripherals.
 421
 422 config MACH_MX31LITE
 423         bool "Support MX31 LITEKIT (LogicPD)"
 424         select SOC_IMX31
 425         select MXC_ULPI if USB_ULPI
 426         select IMX_HAVE_PLATFORM_IMX2_WDT
 427         select IMX_HAVE_PLATFORM_IMX_UART
 428         select IMX_HAVE_PLATFORM_MXC_EHCI
 429         select IMX_HAVE_PLATFORM_MXC_MMC
 430         select IMX_HAVE_PLATFORM_MXC_NAND
 431         select IMX_HAVE_PLATFORM_MXC_RTC
 432         select IMX_HAVE_PLATFORM_SPI_IMX
 433         select LEDS_GPIO_REGISTER
 434         help
 435           Include support for MX31 LITEKIT platform. This includes specific
 436           configurations for the board and its peripherals.
 437
 438 config MACH_PCM037
 439         bool "Support Phytec pcm037 (i.MX31) platforms"
 440         select SOC_IMX31
 441         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 442         select IMX_HAVE_PLATFORM_IMX2_WDT
 443         select IMX_HAVE_PLATFORM_IMX_I2C
 444         select IMX_HAVE_PLATFORM_IMX_UART
 445         select IMX_HAVE_PLATFORM_IPU_CORE
 446         select IMX_HAVE_PLATFORM_MXC_EHCI
 447         select IMX_HAVE_PLATFORM_MXC_MMC
 448         select IMX_HAVE_PLATFORM_MXC_NAND
 449         select IMX_HAVE_PLATFORM_MXC_W1
 450         select MXC_ULPI if USB_ULPI
 451         help
 452           Include support for Phytec pcm037 platform. This includes
 453           specific configurations for the board and its peripherals.
 454
 455 config MACH_PCM037_EET
 456         bool "Support pcm037 EET board extensions"
 457         depends on MACH_PCM037
 458         select IMX_HAVE_PLATFORM_GPIO_KEYS
 459         select IMX_HAVE_PLATFORM_SPI_IMX
 460         help
 461           Add support for PCM037 EET baseboard extensions. If you are using the
 462           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 463           command-line parameter.
 464
 465 config MACH_MX31_3DS
 466         bool "Support MX31PDK (3DS)"
 467         select SOC_IMX31
 468         select MXC_DEBUG_BOARD
 469         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 470         select IMX_HAVE_PLATFORM_IMX2_WDT
 471         select IMX_HAVE_PLATFORM_IMX_I2C
 472         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 473         select IMX_HAVE_PLATFORM_IMX_UART
 474         select IMX_HAVE_PLATFORM_IPU_CORE
 475         select IMX_HAVE_PLATFORM_MXC_EHCI
 476         select IMX_HAVE_PLATFORM_MXC_MMC
 477         select IMX_HAVE_PLATFORM_MXC_NAND
 478         select IMX_HAVE_PLATFORM_SPI_IMX
 479         select MXC_ULPI if USB_ULPI
 480         help
 481           Include support for MX31PDK (3DS) platform. This includes specific
 482           configurations for the board and its peripherals.
 483
 484 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 485         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 486         depends on MACH_MX31_3DS
 487         depends on MTD_NAND_MXC
 488         help
 489           Enable this if you want that the MXC NAND driver uses the in flash
 490           Bad Block Table to know what blocks are bad instead of scanning the
 491           entire flash looking for bad block markers.
 492
 493 config MACH_MX31MOBOARD
 494         bool "Support mx31moboard platforms (EPFL Mobots group)"
 495         select SOC_IMX31
 496         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 497         select IMX_HAVE_PLATFORM_IMX2_WDT
 498         select IMX_HAVE_PLATFORM_IMX_I2C
 499         select IMX_HAVE_PLATFORM_IMX_UART
 500         select IMX_HAVE_PLATFORM_IPU_CORE
 501         select IMX_HAVE_PLATFORM_MXC_EHCI
 502         select IMX_HAVE_PLATFORM_MXC_MMC
 503         select IMX_HAVE_PLATFORM_SPI_IMX
 504         select LEDS_GPIO_REGISTER
 505         select MXC_ULPI if USB_ULPI
 506         help
 507           Include support for mx31moboard platform. This includes specific
 508           configurations for the board and its peripherals.
 509
 510 config MACH_QONG
 511         bool "Support Dave/DENX QongEVB-LITE platform"
 512         select SOC_IMX31
 513         select IMX_HAVE_PLATFORM_IMX_UART
 514         select IMX_HAVE_PLATFORM_IMX2_WDT
 515         help
 516           Include support for Dave/DENX QongEVB-LITE platform. This includes
 517           specific configurations for the board and its peripherals.
 518
 519 config MACH_ARMADILLO5X0
 520         bool "Support Atmark Armadillo-500 Development Base Board"
 521         select SOC_IMX31
 522         select IMX_HAVE_PLATFORM_GPIO_KEYS
 523         select IMX_HAVE_PLATFORM_IMX_I2C
 524         select IMX_HAVE_PLATFORM_IMX_UART
 525         select IMX_HAVE_PLATFORM_IPU_CORE
 526         select IMX_HAVE_PLATFORM_MXC_EHCI
 527         select IMX_HAVE_PLATFORM_MXC_MMC
 528         select IMX_HAVE_PLATFORM_MXC_NAND
 529         select MXC_ULPI if USB_ULPI
 530         help
 531           Include support for Atmark Armadillo-500 platform. This includes
 532           specific configurations for the board and its peripherals.
 533
 534 config MACH_KZM_ARM11_01
 535         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 536         select SOC_IMX31
 537         select IMX_HAVE_PLATFORM_IMX_UART
 538         help
 539           Include support for KZM-ARM11-01. This includes specific
 540           configurations for the board and its peripherals.
 541
 542 config MACH_BUG
 543         bool "Support Buglabs BUGBase platform"
 544         select SOC_IMX31
 545         select IMX_HAVE_PLATFORM_IMX_UART
 546         default y
 547         help
 548           Include support for BUGBase 1.3 platform. This includes specific
 549           configurations for the board and its peripherals.
 550
 551 comment "MX35 platforms:"
 552
 553 config MACH_PCM043
 554         bool "Support Phytec pcm043 (i.MX35) platforms"
 555         select SOC_IMX35
 556         select IMX_HAVE_PLATFORM_FLEXCAN
 557         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 558         select IMX_HAVE_PLATFORM_IMX2_WDT
 559         select IMX_HAVE_PLATFORM_IMX_I2C
 560         select IMX_HAVE_PLATFORM_IMX_SSI
 561         select IMX_HAVE_PLATFORM_IMX_UART
 562         select IMX_HAVE_PLATFORM_IPU_CORE
 563         select IMX_HAVE_PLATFORM_MXC_EHCI
 564         select IMX_HAVE_PLATFORM_MXC_NAND
 565         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 566         select MXC_ULPI if USB_ULPI
 567         help
 568           Include support for Phytec pcm043 platform. This includes
 569           specific configurations for the board and its peripherals.
 570
 571 config MACH_MX35_3DS
 572         bool "Support MX35PDK platform"
 573         select SOC_IMX35
 574         select MXC_DEBUG_BOARD
 575         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 576         select IMX_HAVE_PLATFORM_IMX2_WDT
 577         select IMX_HAVE_PLATFORM_IMX_I2C
 578         select IMX_HAVE_PLATFORM_IMX_UART
 579         select IMX_HAVE_PLATFORM_MXC_EHCI
 580         select IMX_HAVE_PLATFORM_MXC_NAND
 581         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 582         help
 583           Include support for MX35PDK platform. This includes specific
 584           configurations for the board and its peripherals.
 585
 586 config MACH_EUKREA_CPUIMX35SD
 587         bool "Support Eukrea CPUIMX35 Platform"
 588         select SOC_IMX35
 589         select IMX_HAVE_PLATFORM_FLEXCAN
 590         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 591         select IMX_HAVE_PLATFORM_IMX2_WDT
 592         select IMX_HAVE_PLATFORM_IMX_I2C
 593         select IMX_HAVE_PLATFORM_IMX_UART
 594         select IMX_HAVE_PLATFORM_MXC_EHCI
 595         select IMX_HAVE_PLATFORM_MXC_NAND
 596         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 597         select MXC_ULPI if USB_ULPI
 598         help
 599           Include support for Eukrea CPUIMX35 platform. This includes
 600           specific configurations for the board and its peripherals.
 601
 602 choice
 603         prompt "Baseboard"
 604         depends on MACH_EUKREA_CPUIMX35SD
 605         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 606
 607 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 608         bool "Eukrea MBIMXSD development board"
 609         select IMX_HAVE_PLATFORM_GPIO_KEYS
 610         select IMX_HAVE_PLATFORM_IMX_SSI
 611         select IMX_HAVE_PLATFORM_IPU_CORE
 612         select LEDS_GPIO_REGISTER
 613         help
 614           This adds board specific devices that can be found on Eukrea's
 615           MBIMXSD evaluation board.
 616
 617 endchoice
 618
 619 config MACH_VPR200
 620         bool "Support VPR200 platform"
 621         select SOC_IMX35
 622         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 623         select IMX_HAVE_PLATFORM_GPIO_KEYS
 624         select IMX_HAVE_PLATFORM_IMX2_WDT
 625         select IMX_HAVE_PLATFORM_IMX_UART
 626         select IMX_HAVE_PLATFORM_IMX_I2C
 627         select IMX_HAVE_PLATFORM_IPU_CORE
 628         select IMX_HAVE_PLATFORM_MXC_EHCI
 629         select IMX_HAVE_PLATFORM_MXC_NAND
 630         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 631         help
 632           Include support for VPR200 platform. This includes specific
 633           configurations for the board and its peripherals.
 634
 635 comment "i.MX5 platforms:"
 636
 637 config MACH_MX50_RDP
 638         bool "Support MX50 reference design platform"
 639         depends on BROKEN
 640         select SOC_IMX50
 641         select IMX_HAVE_PLATFORM_IMX_I2C
 642         select IMX_HAVE_PLATFORM_IMX_UART
 643         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 644         select IMX_HAVE_PLATFORM_SPI_IMX
 645         help
 646           Include support for MX50 reference design platform (RDP) board. This
 647           includes specific configurations for the board and its peripherals.
 648
 649 comment "i.MX51 machines:"
 650
 651 config MACH_IMX51_DT
 652         bool "Support i.MX51 platforms from device tree"
 653         select SOC_IMX51
 654         select USE_OF
 655         select MACH_MX51_BABBAGE
 656         help
 657           Include support for Freescale i.MX51 based platforms
 658           using the device tree for discovery
 659
 660 config MACH_MX51_BABBAGE
 661         bool "Support MX51 BABBAGE platforms"
 662         select SOC_IMX51
 663         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 664         select IMX_HAVE_PLATFORM_IMX2_WDT
 665         select IMX_HAVE_PLATFORM_IMX_I2C
 666         select IMX_HAVE_PLATFORM_IMX_UART
 667         select IMX_HAVE_PLATFORM_MXC_EHCI
 668         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 669         select IMX_HAVE_PLATFORM_SPI_IMX
 670         help
 671           Include support for MX51 Babbage platform, also known as MX51EVK in
 672           u-boot. This includes specific configurations for the board and its
 673           peripherals.
 674
 675 config MACH_MX51_3DS
 676         bool "Support MX51PDK (3DS)"
 677         select SOC_IMX51
 678         select IMX_HAVE_PLATFORM_IMX2_WDT
 679         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 680         select IMX_HAVE_PLATFORM_IMX_UART
 681         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 682         select IMX_HAVE_PLATFORM_SPI_IMX
 683         select MXC_DEBUG_BOARD
 684         help
 685           Include support for MX51PDK (3DS) platform. This includes specific
 686           configurations for the board and its peripherals.
 687
 688 config MACH_EUKREA_CPUIMX51
 689         bool "Support Eukrea CPUIMX51 module"
 690         select SOC_IMX51
 691         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 692         select IMX_HAVE_PLATFORM_IMX_I2C
 693         select IMX_HAVE_PLATFORM_IMX_UART
 694         select IMX_HAVE_PLATFORM_MXC_EHCI
 695         select IMX_HAVE_PLATFORM_MXC_NAND
 696         select IMX_HAVE_PLATFORM_SPI_IMX
 697         help
 698           Include support for Eukrea CPUIMX51 platform. This includes
 699           specific configurations for the module and its peripherals.
 700
 701 choice
 702         prompt "Baseboard"
 703         depends on MACH_EUKREA_CPUIMX51
 704         default MACH_EUKREA_MBIMX51_BASEBOARD
 705
 706 config MACH_EUKREA_MBIMX51_BASEBOARD
 707         prompt "Eukrea MBIMX51 development board"
 708         bool
 709         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 710         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 711         select LEDS_GPIO_REGISTER
 712         help
 713           This adds board specific devices that can be found on Eukrea's
 714           MBIMX51 evaluation board.
 715
 716 endchoice
 717
 718 config MACH_EUKREA_CPUIMX51SD
 719         bool "Support Eukrea CPUIMX51SD module"
 720         select SOC_IMX51
 721         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 722         select IMX_HAVE_PLATFORM_IMX_I2C
 723         select IMX_HAVE_PLATFORM_IMX_UART
 724         select IMX_HAVE_PLATFORM_MXC_EHCI
 725         select IMX_HAVE_PLATFORM_MXC_NAND
 726         select IMX_HAVE_PLATFORM_SPI_IMX
 727         help
 728           Include support for Eukrea CPUIMX51SD platform. This includes
 729           specific configurations for the module and its peripherals.
 730
 731 choice
 732         prompt "Baseboard"
 733         depends on MACH_EUKREA_CPUIMX51SD
 734         default MACH_EUKREA_MBIMXSD51_BASEBOARD
 735
 736 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 737         prompt "Eukrea MBIMXSD development board"
 738         bool
 739         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 740         select LEDS_GPIO_REGISTER
 741         help
 742           This adds board specific devices that can be found on Eukrea's
 743           MBIMXSD evaluation board.
 744
 745 endchoice
 746
 747 config MX51_EFIKA_COMMON
 748         bool
 749         select SOC_IMX51
 750         select IMX_HAVE_PLATFORM_IMX_UART
 751         select IMX_HAVE_PLATFORM_MXC_EHCI
 752         select IMX_HAVE_PLATFORM_PATA_IMX
 753         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 754         select IMX_HAVE_PLATFORM_SPI_IMX
 755         select MXC_ULPI if USB_ULPI
 756
 757 config MACH_MX51_EFIKAMX
 758         bool "Support MX51 Genesi Efika MX nettop"
 759         select LEDS_GPIO_REGISTER
 760         select MX51_EFIKA_COMMON
 761         help
 762           Include support for Genesi Efika MX nettop. This includes specific
 763           configurations for the board and its peripherals.
 764
 765 config MACH_MX51_EFIKASB
 766         bool "Support MX51 Genesi Efika Smartbook"
 767         select LEDS_GPIO_REGISTER
 768         select MX51_EFIKA_COMMON
 769         help
 770           Include support for Genesi Efika Smartbook. This includes specific
 771           configurations for the board and its peripherals.
 772
 773 comment "i.MX53 machines:"
 774
 775 config MACH_IMX53_DT
 776         bool "Support i.MX53 platforms from device tree"
 777         select SOC_IMX53
 778         select USE_OF
 779         select MACH_MX53_ARD
 780         select MACH_MX53_EVK
 781         select MACH_MX53_LOCO
 782         select MACH_MX53_SMD
 783         help
 784           Include support for Freescale i.MX53 based platforms
 785           using the device tree for discovery
 786
 787 config MACH_MX53_EVK
 788         bool "Support MX53 EVK platforms"
 789         select SOC_IMX53
 790         select IMX_HAVE_PLATFORM_IMX2_WDT
 791         select IMX_HAVE_PLATFORM_IMX_UART
 792         select IMX_HAVE_PLATFORM_IMX_I2C
 793         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 794         select IMX_HAVE_PLATFORM_SPI_IMX
 795         select LEDS_GPIO_REGISTER
 796         help
 797           Include support for MX53 EVK platform. This includes specific
 798           configurations for the board and its peripherals.
 799
 800 config MACH_MX53_SMD
 801         bool "Support MX53 SMD platforms"
 802         select SOC_IMX53
 803         select IMX_HAVE_PLATFORM_IMX2_WDT
 804         select IMX_HAVE_PLATFORM_IMX_I2C
 805         select IMX_HAVE_PLATFORM_IMX_UART
 806         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 807         help
 808           Include support for MX53 SMD platform. This includes specific
 809           configurations for the board and its peripherals.
 810
 811 config MACH_MX53_LOCO
 812         bool "Support MX53 LOCO platforms"
 813         select SOC_IMX53
 814         select IMX_HAVE_PLATFORM_IMX2_WDT
 815         select IMX_HAVE_PLATFORM_IMX_I2C
 816         select IMX_HAVE_PLATFORM_IMX_UART
 817         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 818         select IMX_HAVE_PLATFORM_GPIO_KEYS
 819         select LEDS_GPIO_REGISTER
 820         help
 821           Include support for MX53 LOCO platform. This includes specific
 822           configurations for the board and its peripherals.
 823
 824 config MACH_MX53_ARD
 825         bool "Support MX53 ARD platforms"
 826         select SOC_IMX53
 827         select IMX_HAVE_PLATFORM_IMX2_WDT
 828         select IMX_HAVE_PLATFORM_IMX_I2C
 829         select IMX_HAVE_PLATFORM_IMX_UART
 830         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 831         select IMX_HAVE_PLATFORM_GPIO_KEYS
 832         help
 833           Include support for MX53 ARD platform. This includes specific
 834           configurations for the board and its peripherals.
 835
 836 comment "i.MX6 family:"
 837
 838 config SOC_IMX6Q
 839         bool "i.MX6 Quad support"
 840         select ARM_CPU_SUSPEND if PM
 841         select ARM_GIC
 842         select CPU_V7
 843         select HAVE_ARM_SCU
 844         select HAVE_IMX_GPC
 845         select HAVE_IMX_MMDC
 846         select HAVE_IMX_SRC
 847         select HAVE_SMP
 848         select USE_OF
 849
 850         help
 851           This enables support for Freescale i.MX6 Quad processor.
 852
 853 endif