arch/arm/mach-imx/Kconfig

   1 config IMX_HAVE_DMA_V1
   2         bool
   3
   4 if ARCH_MX1
   5
   6 config SOC_IMX1
   7         select CPU_ARM920T
   8         select IMX_HAVE_DMA_V1
   9         select IMX_HAVE_IOMUX_V1
  10         bool
  11
  12 comment "MX1 platforms:"
  13 config MACH_MXLADS
  14         bool
  15
  16 config ARCH_MX1ADS
  17         bool "MX1ADS platform"
  18         select MACH_MXLADS
  19         select IMX_HAVE_PLATFORM_IMX_I2C
  20         select IMX_HAVE_PLATFORM_IMX_UART
  21         help
  22           Say Y here if you are using Motorola MX1ADS/MXLADS boards
  23
  24 config MACH_SCB9328
  25         bool "Synertronixx scb9328"
  26         select IMX_HAVE_PLATFORM_IMX_UART
  27         help
  28           Say Y here if you are using a Synertronixx scb9328 board
  29
  30 endif
  31
  32 if ARCH_MX2
  33
  34 config SOC_IMX21
  35         select CPU_ARM926T
  36         select ARCH_MXC_AUDMUX_V1
  37         select IMX_HAVE_DMA_V1
  38         select IMX_HAVE_IOMUX_V1
  39         bool
  40
  41 config SOC_IMX27
  42         select CPU_ARM926T
  43         select ARCH_MXC_AUDMUX_V1
  44         select IMX_HAVE_DMA_V1
  45         select IMX_HAVE_IOMUX_V1
  46         bool
  47
  48 choice
  49         prompt "CPUs:"
  50         default MACH_MX21
  51
  52 config MACH_MX21
  53         bool "i.MX21 support"
  54         select SOC_IMX21
  55         help
  56           This enables support for Freescale's MX2 based i.MX21 processor.
  57
  58 config MACH_MX27
  59         bool "i.MX27 support"
  60         select SOC_IMX27
  61         help
  62           This enables support for Freescale's MX2 based i.MX27 processor.
  63
  64 endchoice
  65
  66 endif
  67
  68 if MACH_MX21
  69
  70 comment "MX21 platforms:"
  71
  72 config MACH_MX21ADS
  73         bool "MX21ADS platform"
  74         select IMX_HAVE_PLATFORM_IMX_UART
  75         select IMX_HAVE_PLATFORM_MXC_NAND
  76         help
  77           Include support for MX21ADS platform. This includes specific
  78           configurations for the board and its peripherals.
  79
  80 endif
  81
  82 if MACH_MX27
  83
  84 comment "MX27 platforms:"
  85
  86 config MACH_MX27ADS
  87         bool "MX27ADS platform"
  88         select IMX_HAVE_PLATFORM_IMX_I2C
  89         select IMX_HAVE_PLATFORM_IMX_UART
  90         select IMX_HAVE_PLATFORM_MXC_NAND
  91         help
  92           Include support for MX27ADS platform. This includes specific
  93           configurations for the board and its peripherals.
  94
  95 config MACH_PCM038
  96         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
  97         select IMX_HAVE_PLATFORM_IMX_I2C
  98         select IMX_HAVE_PLATFORM_IMX_UART
  99         select IMX_HAVE_PLATFORM_MXC_NAND
 100         select IMX_HAVE_PLATFORM_SPI_IMX
 101         select MXC_ULPI if USB_ULPI
 102         help
 103           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 104           includes specific configurations for the module and its peripherals.
 105
 106 choice
 107         prompt "Baseboard"
 108         depends on MACH_PCM038
 109         default MACH_PCM970_BASEBOARD
 110
 111 config MACH_PCM970_BASEBOARD
 112         prompt "PHYTEC PCM970 development board"
 113         bool
 114         help
 115           This adds board specific devices that can be found on Phytec's
 116           PCM970 evaluation board.
 117
 118 endchoice
 119
 120 config MACH_CPUIMX27
 121         bool "Eukrea CPUIMX27 module"
 122         select IMX_HAVE_PLATFORM_IMX_I2C
 123         select IMX_HAVE_PLATFORM_IMX_UART
 124         select IMX_HAVE_PLATFORM_MXC_NAND
 125         help
 126           Include support for Eukrea CPUIMX27 platform. This includes
 127           specific configurations for the module and its peripherals.
 128
 129 config MACH_EUKREA_CPUIMX27_USESDHC2
 130         bool "CPUIMX27 integrates SDHC2 module"
 131         depends on MACH_CPUIMX27
 132         help
 133           This adds support for the internal SDHC2 used on CPUIMX27
 134           for wifi or eMMC.
 135
 136 config MACH_EUKREA_CPUIMX27_USEUART4
 137         bool "CPUIMX27 integrates UART4 module"
 138         depends on MACH_CPUIMX27
 139         help
 140           This adds support for the internal UART4 used on CPUIMX27
 141           for bluetooth.
 142
 143 choice
 144         prompt "Baseboard"
 145         depends on MACH_CPUIMX27
 146         default MACH_EUKREA_MBIMX27_BASEBOARD
 147
 148 config MACH_EUKREA_MBIMX27_BASEBOARD
 149         bool "Eukrea MBIMX27 development board"
 150         select IMX_HAVE_PLATFORM_IMX_SSI
 151         select IMX_HAVE_PLATFORM_IMX_UART
 152         select IMX_HAVE_PLATFORM_SPI_IMX
 153         help
 154           This adds board specific devices that can be found on Eukrea's
 155           MBIMX27 evaluation board.
 156
 157 endchoice
 158
 159 config MACH_MX27_3DS
 160         bool "MX27PDK platform"
 161         select IMX_HAVE_PLATFORM_IMX_UART
 162         help
 163           Include support for MX27PDK platform. This includes specific
 164           configurations for the board and its peripherals.
 165
 166 config MACH_IMX27_VISSTRIM_M10
 167         bool "Vista Silicon i.MX27 Visstrim_m10"
 168         select IMX_HAVE_PLATFORM_IMX_I2C
 169         select IMX_HAVE_PLATFORM_IMX_UART
 170         help
 171           Include support for Visstrim_m10 platform and its different variants.
 172           This includes specific configurations for the board and its
 173           peripherals.
 174
 175 config MACH_IMX27LITE
 176         bool "LogicPD MX27 LITEKIT platform"
 177         select IMX_HAVE_PLATFORM_IMX_UART
 178         help
 179           Include support for MX27 LITEKIT platform. This includes specific
 180           configurations for the board and its peripherals.
 181
 182 config MACH_PCA100
 183         bool "Phytec phyCARD-s (pca100)"
 184         select IMX_HAVE_PLATFORM_IMX_I2C
 185         select IMX_HAVE_PLATFORM_IMX_SSI
 186         select IMX_HAVE_PLATFORM_IMX_UART
 187         select IMX_HAVE_PLATFORM_MXC_NAND
 188         select IMX_HAVE_PLATFORM_SPI_IMX
 189         select MXC_ULPI if USB_ULPI
 190         help
 191           Include support for phyCARD-s (aka pca100) platform. This
 192           includes specific configurations for the module and its peripherals.
 193
 194 config MACH_MXT_TD60
 195         bool "Maxtrack i-MXT TD60"
 196         select IMX_HAVE_PLATFORM_IMX_I2C
 197         select IMX_HAVE_PLATFORM_IMX_UART
 198         select IMX_HAVE_PLATFORM_MXC_NAND
 199         help
 200           Include support for i-MXT (aka td60) platform. This
 201           includes specific configurations for the module and its peripherals.
 202
 203 endif