arch/arm/mach-imx/Kconfig

   1 config ARCH_MXC
   2         bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
   3         select ARCH_REQUIRE_GPIOLIB
   4         select ARM_CPU_SUSPEND if PM
   5         select ARM_PATCH_PHYS_VIRT
   6         select AUTO_ZRELADDR if !ZBOOT_ROM
   7         select CLKDEV_LOOKUP
   8         select CLKSRC_MMIO
   9         select GENERIC_ALLOCATOR
  10         select GENERIC_CLOCKEVENTS
  11         select GENERIC_IRQ_CHIP
  12         select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
  13         select MULTI_IRQ_HANDLER
  14         select SPARSE_IRQ
  15         select USE_OF
  16         help
  17           Support for Freescale MXC/iMX-based family of processors
  18
  19 menu "Freescale i.MX support"
  20         depends on ARCH_MXC
  21
  22 config MXC_IRQ_PRIOR
  23         bool "Use IRQ priority"
  24         help
  25           Select this if you want to use prioritized IRQ handling.
  26           This feature prevents higher priority ISR to be interrupted
  27           by lower priority IRQ.
  28           This may be useful in embedded applications, where are strong
  29           requirements for timing.
  30           Say N here, unless you have a specialized requirement.
  31
  32 config MXC_TZIC
  33         bool
  34
  35 config MXC_AVIC
  36         bool
  37
  38 config MXC_DEBUG_BOARD
  39         bool "Enable MXC debug board(for 3-stack)"
  40         help
  41           The debug board is an integral part of the MXC 3-stack(PDK)
  42           platforms, it can be attached or removed from the peripheral
  43           board. On debug board, several debug devices(ethernet, UART,
  44           buttons, LEDs and JTAG) are implemented. Between the MCU and
  45           these devices, a CPLD is added as a bridge which performs
  46           data/address de-multiplexing and decode, signal level shift,
  47           interrupt control and various board functions.
  48
  49 config HAVE_EPIT
  50         bool
  51
  52 config MXC_USE_EPIT
  53         bool "Use EPIT instead of GPT"
  54         depends on HAVE_EPIT
  55         help
  56           Use EPIT as the system timer on systems that have it. Normally you
  57           don't have a reason to do so as the EPIT has the same features and
  58           uses the same clocks as the GPT. Anyway, on some systems the GPT
  59           may be in use for other purposes.
  60
  61 config ARCH_HAS_RNGA
  62         bool
  63
  64 config HAVE_IMX_ANATOP
  65         bool
  66
  67 config HAVE_IMX_GPC
  68         bool
  69
  70 config HAVE_IMX_MMDC
  71         bool
  72
  73 config HAVE_IMX_SRC
  74         def_bool y if SMP
  75         select ARCH_HAS_RESET_CONTROLLER
  76
  77 config IMX_HAVE_IOMUX_V1
  78         bool
  79
  80 config ARCH_MXC_IOMUX_V3
  81         bool
  82
  83 config ARCH_MX1
  84         bool
  85
  86 config ARCH_MX25
  87         bool
  88
  89 config MACH_MX27
  90         bool
  91
  92 config SOC_IMX1
  93         bool
  94         select ARCH_MX1
  95         select COMMON_CLK
  96         select CPU_ARM920T
  97         select IMX_HAVE_IOMUX_V1
  98         select MXC_AVIC
  99
 100 config SOC_IMX21
 101         bool
 102         select COMMON_CLK
 103         select CPU_ARM926T
 104         select IMX_HAVE_IOMUX_V1
 105         select MXC_AVIC
 106
 107 config SOC_IMX25
 108         bool
 109         select ARCH_MX25
 110         select ARCH_MXC_IOMUX_V3
 111         select COMMON_CLK
 112         select CPU_ARM926T
 113         select MXC_AVIC
 114
 115 config SOC_IMX27
 116         bool
 117         select ARCH_HAS_CPUFREQ
 118         select ARCH_HAS_OPP
 119         select COMMON_CLK
 120         select CPU_ARM926T
 121         select IMX_HAVE_IOMUX_V1
 122         select MACH_MX27
 123         select MXC_AVIC
 124
 125 config SOC_IMX31
 126         bool
 127         select COMMON_CLK
 128         select CPU_V6
 129         select IMX_HAVE_PLATFORM_MXC_RNGA
 130         select MXC_AVIC
 131         select SMP_ON_UP if SMP
 132
 133 config SOC_IMX35
 134         bool
 135         select ARCH_MXC_IOMUX_V3
 136         select COMMON_CLK
 137         select CPU_V6K
 138         select HAVE_EPIT
 139         select MXC_AVIC
 140         select SMP_ON_UP if SMP
 141
 142 config SOC_IMX5
 143         bool
 144         select ARCH_HAS_CPUFREQ
 145         select ARCH_HAS_OPP
 146         select ARCH_MXC_IOMUX_V3
 147         select COMMON_CLK
 148         select CPU_V7
 149         select MXC_TZIC
 150
 151 config  SOC_IMX51
 152         bool
 153         select HAVE_IMX_SRC
 154         select PINCTRL
 155         select PINCTRL_IMX51
 156         select SOC_IMX5
 157
 158 if ARCH_MULTI_V4T
 159
 160 comment "MX1 platforms:"
 161 config MACH_MXLADS
 162         bool
 163
 164 config ARCH_MX1ADS
 165         bool "MX1ADS platform"
 166         select IMX_HAVE_PLATFORM_IMX_I2C
 167         select IMX_HAVE_PLATFORM_IMX_UART
 168         select MACH_MXLADS
 169         select SOC_IMX1
 170         help
 171           Say Y here if you are using Motorola MX1ADS/MXLADS boards
 172
 173 config MACH_SCB9328
 174         bool "Synertronixx scb9328"
 175         select IMX_HAVE_PLATFORM_IMX_UART
 176         select SOC_IMX1
 177         help
 178           Say Y here if you are using a Synertronixx scb9328 board
 179
 180 config MACH_APF9328
 181         bool "APF9328"
 182         select IMX_HAVE_PLATFORM_IMX_I2C
 183         select IMX_HAVE_PLATFORM_IMX_UART
 184         select SOC_IMX1
 185         help
 186           Say Yes here if you are using the Armadeus APF9328 development board
 187
 188 endif
 189
 190 if ARCH_MULTI_V5
 191
 192 comment "MX21 platforms:"
 193
 194 config MACH_MX21ADS
 195         bool "MX21ADS platform"
 196         select IMX_HAVE_PLATFORM_IMX_FB
 197         select IMX_HAVE_PLATFORM_IMX_UART
 198         select IMX_HAVE_PLATFORM_MXC_MMC
 199         select IMX_HAVE_PLATFORM_MXC_NAND
 200         select SOC_IMX21
 201         help
 202           Include support for MX21ADS platform. This includes specific
 203           configurations for the board and its peripherals.
 204
 205 comment "MX25 platforms:"
 206
 207 config MACH_MX25_3DS
 208         bool "Support MX25PDK (3DS) Platform"
 209         select IMX_HAVE_PLATFORM_FLEXCAN
 210         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 211         select IMX_HAVE_PLATFORM_IMX2_WDT
 212         select IMX_HAVE_PLATFORM_IMXDI_RTC
 213         select IMX_HAVE_PLATFORM_IMX_FB
 214         select IMX_HAVE_PLATFORM_IMX_I2C
 215         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 216         select IMX_HAVE_PLATFORM_IMX_UART
 217         select IMX_HAVE_PLATFORM_MXC_EHCI
 218         select IMX_HAVE_PLATFORM_MXC_NAND
 219         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 220         select SOC_IMX25
 221
 222 config MACH_EUKREA_CPUIMX25SD
 223         bool "Support Eukrea CPUIMX25 Platform"
 224         select IMX_HAVE_PLATFORM_FLEXCAN
 225         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 226         select IMX_HAVE_PLATFORM_IMX2_WDT
 227         select IMX_HAVE_PLATFORM_IMXDI_RTC
 228         select IMX_HAVE_PLATFORM_IMX_FB
 229         select IMX_HAVE_PLATFORM_IMX_I2C
 230         select IMX_HAVE_PLATFORM_IMX_UART
 231         select IMX_HAVE_PLATFORM_MXC_EHCI
 232         select IMX_HAVE_PLATFORM_MXC_NAND
 233         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 234         select USB_ULPI_VIEWPORT if USB_ULPI
 235         select SOC_IMX25
 236
 237 choice
 238         prompt "Baseboard"
 239         depends on MACH_EUKREA_CPUIMX25SD
 240         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 241
 242 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 243         bool "Eukrea MBIMXSD development board"
 244         select IMX_HAVE_PLATFORM_GPIO_KEYS
 245         select IMX_HAVE_PLATFORM_IMX_SSI
 246         select IMX_HAVE_PLATFORM_SPI_IMX
 247         select LEDS_GPIO_REGISTER
 248         help
 249           This adds board specific devices that can be found on Eukrea's
 250           MBIMXSD evaluation board.
 251
 252 endchoice
 253
 254 config MACH_IMX25_DT
 255         bool "Support i.MX25 platforms from device tree"
 256         select SOC_IMX25
 257         help
 258           Include support for Freescale i.MX25 based platforms
 259           using the device tree for discovery
 260
 261 comment "MX27 platforms:"
 262
 263 config MACH_MX27ADS
 264         bool "MX27ADS platform"
 265         select IMX_HAVE_PLATFORM_IMX_FB
 266         select IMX_HAVE_PLATFORM_IMX_I2C
 267         select IMX_HAVE_PLATFORM_IMX_UART
 268         select IMX_HAVE_PLATFORM_MXC_MMC
 269         select IMX_HAVE_PLATFORM_MXC_NAND
 270         select IMX_HAVE_PLATFORM_MXC_W1
 271         select SOC_IMX27
 272         help
 273           Include support for MX27ADS platform. This includes specific
 274           configurations for the board and its peripherals.
 275
 276 config MACH_PCM038
 277         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 278         select IMX_HAVE_PLATFORM_IMX2_WDT
 279         select IMX_HAVE_PLATFORM_IMX_I2C
 280         select IMX_HAVE_PLATFORM_IMX_UART
 281         select IMX_HAVE_PLATFORM_MXC_EHCI
 282         select IMX_HAVE_PLATFORM_MXC_NAND
 283         select IMX_HAVE_PLATFORM_MXC_W1
 284         select IMX_HAVE_PLATFORM_SPI_IMX
 285         select USB_ULPI_VIEWPORT if USB_ULPI
 286         select SOC_IMX27
 287         help
 288           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 289           includes specific configurations for the module and its peripherals.
 290
 291 choice
 292         prompt "Baseboard"
 293         depends on MACH_PCM038
 294         default MACH_PCM970_BASEBOARD
 295
 296 config MACH_PCM970_BASEBOARD
 297         bool "PHYTEC PCM970 development board"
 298         select IMX_HAVE_PLATFORM_IMX_FB
 299         select IMX_HAVE_PLATFORM_MXC_MMC
 300         help
 301           This adds board specific devices that can be found on Phytec's
 302           PCM970 evaluation board.
 303
 304 endchoice
 305
 306 config MACH_CPUIMX27
 307         bool "Eukrea CPUIMX27 module"
 308         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 309         select IMX_HAVE_PLATFORM_IMX2_WDT
 310         select IMX_HAVE_PLATFORM_IMX_I2C
 311         select IMX_HAVE_PLATFORM_IMX_UART
 312         select IMX_HAVE_PLATFORM_MXC_EHCI
 313         select IMX_HAVE_PLATFORM_MXC_NAND
 314         select IMX_HAVE_PLATFORM_MXC_W1
 315         select USB_ULPI_VIEWPORT if USB_ULPI
 316         select SOC_IMX27
 317         help
 318           Include support for Eukrea CPUIMX27 platform. This includes
 319           specific configurations for the module and its peripherals.
 320
 321 config MACH_EUKREA_CPUIMX27_USESDHC2
 322         bool "CPUIMX27 integrates SDHC2 module"
 323         depends on MACH_CPUIMX27
 324         select IMX_HAVE_PLATFORM_MXC_MMC
 325         help
 326           This adds support for the internal SDHC2 used on CPUIMX27
 327           for wifi or eMMC.
 328
 329 config MACH_EUKREA_CPUIMX27_USEUART4
 330         bool "CPUIMX27 integrates UART4 module"
 331         depends on MACH_CPUIMX27
 332         help
 333           This adds support for the internal UART4 used on CPUIMX27
 334           for bluetooth.
 335
 336 choice
 337         prompt "Baseboard"
 338         depends on MACH_CPUIMX27
 339         default MACH_EUKREA_MBIMX27_BASEBOARD
 340
 341 config MACH_EUKREA_MBIMX27_BASEBOARD
 342         bool "Eukrea MBIMX27 development board"
 343         select IMX_HAVE_PLATFORM_IMX_FB
 344         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 345         select IMX_HAVE_PLATFORM_IMX_SSI
 346         select IMX_HAVE_PLATFORM_IMX_UART
 347         select IMX_HAVE_PLATFORM_MXC_MMC
 348         select IMX_HAVE_PLATFORM_SPI_IMX
 349         select LEDS_GPIO_REGISTER
 350         help
 351           This adds board specific devices that can be found on Eukrea's
 352           MBIMX27 evaluation board.
 353
 354 endchoice
 355
 356 config MACH_MX27_3DS
 357         bool "MX27PDK platform"
 358         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 359         select IMX_HAVE_PLATFORM_IMX2_WDT
 360         select IMX_HAVE_PLATFORM_IMX_FB
 361         select IMX_HAVE_PLATFORM_IMX_I2C
 362         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 363         select IMX_HAVE_PLATFORM_IMX_SSI
 364         select IMX_HAVE_PLATFORM_IMX_UART
 365         select IMX_HAVE_PLATFORM_MX2_CAMERA
 366         select IMX_HAVE_PLATFORM_MXC_EHCI
 367         select IMX_HAVE_PLATFORM_MXC_MMC
 368         select IMX_HAVE_PLATFORM_SPI_IMX
 369         select MXC_DEBUG_BOARD
 370         select USB_ULPI_VIEWPORT if USB_ULPI
 371         select SOC_IMX27
 372         help
 373           Include support for MX27PDK platform. This includes specific
 374           configurations for the board and its peripherals.
 375
 376 config MACH_IMX27_VISSTRIM_M10
 377         bool "Vista Silicon i.MX27 Visstrim_m10"
 378         select IMX_HAVE_PLATFORM_GPIO_KEYS
 379         select IMX_HAVE_PLATFORM_IMX_I2C
 380         select IMX_HAVE_PLATFORM_IMX_SSI
 381         select IMX_HAVE_PLATFORM_IMX_UART
 382         select IMX_HAVE_PLATFORM_MX2_CAMERA
 383         select IMX_HAVE_PLATFORM_MX2_EMMA
 384         select IMX_HAVE_PLATFORM_MXC_EHCI
 385         select IMX_HAVE_PLATFORM_MXC_MMC
 386         select LEDS_GPIO_REGISTER
 387         select SOC_IMX27
 388         help
 389           Include support for Visstrim_m10 platform and its different variants.
 390           This includes specific configurations for the board and its
 391           peripherals.
 392
 393 config MACH_IMX27LITE
 394         bool "LogicPD MX27 LITEKIT platform"
 395         select IMX_HAVE_PLATFORM_IMX_SSI
 396         select IMX_HAVE_PLATFORM_IMX_UART
 397         select SOC_IMX27
 398         help
 399           Include support for MX27 LITEKIT platform. This includes specific
 400           configurations for the board and its peripherals.
 401
 402 config MACH_PCA100
 403         bool "Phytec phyCARD-s (pca100)"
 404         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 405         select IMX_HAVE_PLATFORM_IMX2_WDT
 406         select IMX_HAVE_PLATFORM_IMX_FB
 407         select IMX_HAVE_PLATFORM_IMX_I2C
 408         select IMX_HAVE_PLATFORM_IMX_SSI
 409         select IMX_HAVE_PLATFORM_IMX_UART
 410         select IMX_HAVE_PLATFORM_MXC_EHCI
 411         select IMX_HAVE_PLATFORM_MXC_MMC
 412         select IMX_HAVE_PLATFORM_MXC_NAND
 413         select IMX_HAVE_PLATFORM_MXC_W1
 414         select IMX_HAVE_PLATFORM_SPI_IMX
 415         select USB_ULPI_VIEWPORT if USB_ULPI
 416         select SOC_IMX27
 417         help
 418           Include support for phyCARD-s (aka pca100) platform. This
 419           includes specific configurations for the module and its peripherals.
 420
 421 config MACH_MXT_TD60
 422         bool "Maxtrack i-MXT TD60"
 423         select IMX_HAVE_PLATFORM_IMX_FB
 424         select IMX_HAVE_PLATFORM_IMX_I2C
 425         select IMX_HAVE_PLATFORM_IMX_UART
 426         select IMX_HAVE_PLATFORM_MXC_MMC
 427         select IMX_HAVE_PLATFORM_MXC_NAND
 428         select SOC_IMX27
 429         help
 430           Include support for i-MXT (aka td60) platform. This
 431           includes specific configurations for the module and its peripherals.
 432
 433 config MACH_IMX27IPCAM
 434         bool "IMX27 IPCAM platform"
 435         select IMX_HAVE_PLATFORM_IMX2_WDT
 436         select IMX_HAVE_PLATFORM_IMX_UART
 437         select SOC_IMX27
 438         help
 439           Include support for IMX27 IPCAM platform. This includes specific
 440           configurations for the board and its peripherals.
 441
 442 config MACH_IMX27_DT
 443         bool "Support i.MX27 platforms from device tree"
 444         select SOC_IMX27
 445         help
 446           Include support for Freescale i.MX27 based platforms
 447           using the device tree for discovery
 448
 449 endif
 450
 451 if ARCH_MULTI_V6
 452
 453 comment "MX31 platforms:"
 454
 455 config MACH_MX31ADS
 456         bool "Support MX31ADS platforms"
 457         default y
 458         select IMX_HAVE_PLATFORM_IMX_I2C
 459         select IMX_HAVE_PLATFORM_IMX_SSI
 460         select IMX_HAVE_PLATFORM_IMX_UART
 461         select SOC_IMX31
 462         help
 463           Include support for MX31ADS platform. This includes specific
 464           configurations for the board and its peripherals.
 465
 466 config MACH_MX31ADS_WM1133_EV1
 467         bool "Support Wolfson Microelectronics 1133-EV1 module"
 468         depends on MACH_MX31ADS
 469         depends on MFD_WM8350_I2C
 470         depends on REGULATOR_WM8350 = y
 471         help
 472           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 473           and audio module for the MX31ADS platform.
 474
 475 config MACH_MX31LILLY
 476         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 477         select IMX_HAVE_PLATFORM_IMX_UART
 478         select IMX_HAVE_PLATFORM_IPU_CORE
 479         select IMX_HAVE_PLATFORM_MXC_EHCI
 480         select IMX_HAVE_PLATFORM_MXC_MMC
 481         select IMX_HAVE_PLATFORM_SPI_IMX
 482         select USB_ULPI_VIEWPORT if USB_ULPI
 483         select SOC_IMX31
 484         help
 485           Include support for mx31 based LILLY1131 modules. This includes
 486           specific configurations for the board and its peripherals.
 487
 488 config MACH_MX31LITE
 489         bool "Support MX31 LITEKIT (LogicPD)"
 490         select IMX_HAVE_PLATFORM_IMX2_WDT
 491         select IMX_HAVE_PLATFORM_IMX_UART
 492         select IMX_HAVE_PLATFORM_MXC_EHCI
 493         select IMX_HAVE_PLATFORM_MXC_MMC
 494         select IMX_HAVE_PLATFORM_MXC_NAND
 495         select IMX_HAVE_PLATFORM_MXC_RTC
 496         select IMX_HAVE_PLATFORM_SPI_IMX
 497         select LEDS_GPIO_REGISTER
 498         select USB_ULPI_VIEWPORT if USB_ULPI
 499         select SOC_IMX31
 500         help
 501           Include support for MX31 LITEKIT platform. This includes specific
 502           configurations for the board and its peripherals.
 503
 504 config MACH_PCM037
 505         bool "Support Phytec pcm037 (i.MX31) platforms"
 506         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 507         select IMX_HAVE_PLATFORM_IMX2_WDT
 508         select IMX_HAVE_PLATFORM_IMX_I2C
 509         select IMX_HAVE_PLATFORM_IMX_UART
 510         select IMX_HAVE_PLATFORM_IPU_CORE
 511         select IMX_HAVE_PLATFORM_MXC_EHCI
 512         select IMX_HAVE_PLATFORM_MXC_MMC
 513         select IMX_HAVE_PLATFORM_MXC_NAND
 514         select IMX_HAVE_PLATFORM_MXC_W1
 515         select USB_ULPI_VIEWPORT if USB_ULPI
 516         select SOC_IMX31
 517         help
 518           Include support for Phytec pcm037 platform. This includes
 519           specific configurations for the board and its peripherals.
 520
 521 config MACH_PCM037_EET
 522         bool "Support pcm037 EET board extensions"
 523         depends on MACH_PCM037
 524         select IMX_HAVE_PLATFORM_GPIO_KEYS
 525         select IMX_HAVE_PLATFORM_SPI_IMX
 526         help
 527           Add support for PCM037 EET baseboard extensions. If you are using the
 528           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 529           command-line parameter.
 530
 531 config MACH_MX31_3DS
 532         bool "Support MX31PDK (3DS)"
 533         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 534         select IMX_HAVE_PLATFORM_IMX2_WDT
 535         select IMX_HAVE_PLATFORM_IMX_I2C
 536         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 537         select IMX_HAVE_PLATFORM_IMX_SSI
 538         select IMX_HAVE_PLATFORM_IMX_UART
 539         select IMX_HAVE_PLATFORM_IPU_CORE
 540         select IMX_HAVE_PLATFORM_MXC_EHCI
 541         select IMX_HAVE_PLATFORM_MXC_MMC
 542         select IMX_HAVE_PLATFORM_MXC_NAND
 543         select IMX_HAVE_PLATFORM_SPI_IMX
 544         select MXC_DEBUG_BOARD
 545         select USB_ULPI_VIEWPORT if USB_ULPI
 546         select SOC_IMX31
 547         help
 548           Include support for MX31PDK (3DS) platform. This includes specific
 549           configurations for the board and its peripherals.
 550
 551 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 552         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 553         depends on MACH_MX31_3DS
 554         depends on MTD_NAND_MXC
 555         help
 556           Enable this if you want that the MXC NAND driver uses the in flash
 557           Bad Block Table to know what blocks are bad instead of scanning the
 558           entire flash looking for bad block markers.
 559
 560 config MACH_MX31MOBOARD
 561         bool "Support mx31moboard platforms (EPFL Mobots group)"
 562         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 563         select IMX_HAVE_PLATFORM_IMX2_WDT
 564         select IMX_HAVE_PLATFORM_IMX_I2C
 565         select IMX_HAVE_PLATFORM_IMX_SSI
 566         select IMX_HAVE_PLATFORM_IMX_UART
 567         select IMX_HAVE_PLATFORM_IPU_CORE
 568         select IMX_HAVE_PLATFORM_MXC_EHCI
 569         select IMX_HAVE_PLATFORM_MXC_MMC
 570         select IMX_HAVE_PLATFORM_SPI_IMX
 571         select LEDS_GPIO_REGISTER
 572         select USB_ULPI_VIEWPORT if USB_ULPI
 573         select SOC_IMX31
 574         help
 575           Include support for mx31moboard platform. This includes specific
 576           configurations for the board and its peripherals.
 577
 578 config MACH_QONG
 579         bool "Support Dave/DENX QongEVB-LITE platform"
 580         select IMX_HAVE_PLATFORM_IMX2_WDT
 581         select IMX_HAVE_PLATFORM_IMX_UART
 582         select SOC_IMX31
 583         help
 584           Include support for Dave/DENX QongEVB-LITE platform. This includes
 585           specific configurations for the board and its peripherals.
 586
 587 config MACH_ARMADILLO5X0
 588         bool "Support Atmark Armadillo-500 Development Base Board"
 589         select IMX_HAVE_PLATFORM_GPIO_KEYS
 590         select IMX_HAVE_PLATFORM_IMX_I2C
 591         select IMX_HAVE_PLATFORM_IMX_UART
 592         select IMX_HAVE_PLATFORM_IPU_CORE
 593         select IMX_HAVE_PLATFORM_MXC_EHCI
 594         select IMX_HAVE_PLATFORM_MXC_MMC
 595         select IMX_HAVE_PLATFORM_MXC_NAND
 596         select USB_ULPI_VIEWPORT if USB_ULPI
 597         select SOC_IMX31
 598         help
 599           Include support for Atmark Armadillo-500 platform. This includes
 600           specific configurations for the board and its peripherals.
 601
 602 config MACH_KZM_ARM11_01
 603         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 604         select IMX_HAVE_PLATFORM_IMX_UART
 605         select SOC_IMX31
 606         help
 607           Include support for KZM-ARM11-01. This includes specific
 608           configurations for the board and its peripherals.
 609
 610 config MACH_BUG
 611         bool "Support Buglabs BUGBase platform"
 612         default y
 613         select IMX_HAVE_PLATFORM_IMX_UART
 614         select SOC_IMX31
 615         help
 616           Include support for BUGBase 1.3 platform. This includes specific
 617           configurations for the board and its peripherals.
 618
 619 config MACH_IMX31_DT
 620         bool "Support i.MX31 platforms from device tree"
 621         select SOC_IMX31
 622         help
 623           Include support for Freescale i.MX31 based platforms
 624           using the device tree for discovery.
 625
 626 comment "MX35 platforms:"
 627
 628 config MACH_PCM043
 629         bool "Support Phytec pcm043 (i.MX35) platforms"
 630         select IMX_HAVE_PLATFORM_FLEXCAN
 631         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 632         select IMX_HAVE_PLATFORM_IMX2_WDT
 633         select IMX_HAVE_PLATFORM_IMX_I2C
 634         select IMX_HAVE_PLATFORM_IMX_SSI
 635         select IMX_HAVE_PLATFORM_IMX_UART
 636         select IMX_HAVE_PLATFORM_IPU_CORE
 637         select IMX_HAVE_PLATFORM_MXC_EHCI
 638         select IMX_HAVE_PLATFORM_MXC_NAND
 639         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 640         select USB_ULPI_VIEWPORT if USB_ULPI
 641         select SOC_IMX35
 642         help
 643           Include support for Phytec pcm043 platform. This includes
 644           specific configurations for the board and its peripherals.
 645
 646 config MACH_MX35_3DS
 647         bool "Support MX35PDK platform"
 648         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 649         select IMX_HAVE_PLATFORM_IMX2_WDT
 650         select IMX_HAVE_PLATFORM_IMX_FB
 651         select IMX_HAVE_PLATFORM_IMX_I2C
 652         select IMX_HAVE_PLATFORM_IMX_UART
 653         select IMX_HAVE_PLATFORM_IPU_CORE
 654         select IMX_HAVE_PLATFORM_MXC_EHCI
 655         select IMX_HAVE_PLATFORM_MXC_NAND
 656         select IMX_HAVE_PLATFORM_MXC_RTC
 657         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 658         select MXC_DEBUG_BOARD
 659         select SOC_IMX35
 660         help
 661           Include support for MX35PDK platform. This includes specific
 662           configurations for the board and its peripherals.
 663
 664 config MACH_EUKREA_CPUIMX35SD
 665         bool "Support Eukrea CPUIMX35 Platform"
 666         select IMX_HAVE_PLATFORM_FLEXCAN
 667         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 668         select IMX_HAVE_PLATFORM_IMX2_WDT
 669         select IMX_HAVE_PLATFORM_IMX_I2C
 670         select IMX_HAVE_PLATFORM_IMX_UART
 671         select IMX_HAVE_PLATFORM_MXC_EHCI
 672         select IMX_HAVE_PLATFORM_MXC_NAND
 673         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 674         select USB_ULPI_VIEWPORT if USB_ULPI
 675         select SOC_IMX35
 676         help
 677           Include support for Eukrea CPUIMX35 platform. This includes
 678           specific configurations for the board and its peripherals.
 679
 680 choice
 681         prompt "Baseboard"
 682         depends on MACH_EUKREA_CPUIMX35SD
 683         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 684
 685 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 686         bool "Eukrea MBIMXSD development board"
 687         select IMX_HAVE_PLATFORM_GPIO_KEYS
 688         select IMX_HAVE_PLATFORM_IMX_SSI
 689         select IMX_HAVE_PLATFORM_IPU_CORE
 690         select IMX_HAVE_PLATFORM_SPI_IMX
 691         select LEDS_GPIO_REGISTER
 692         help
 693           This adds board specific devices that can be found on Eukrea's
 694           MBIMXSD evaluation board.
 695
 696 endchoice
 697
 698 config MACH_VPR200
 699         bool "Support VPR200 platform"
 700         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 701         select IMX_HAVE_PLATFORM_GPIO_KEYS
 702         select IMX_HAVE_PLATFORM_IMX2_WDT
 703         select IMX_HAVE_PLATFORM_IMX_I2C
 704         select IMX_HAVE_PLATFORM_IMX_UART
 705         select IMX_HAVE_PLATFORM_IPU_CORE
 706         select IMX_HAVE_PLATFORM_MXC_EHCI
 707         select IMX_HAVE_PLATFORM_MXC_NAND
 708         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 709         select SOC_IMX35
 710         help
 711           Include support for VPR200 platform. This includes specific
 712           configurations for the board and its peripherals.
 713
 714 endif
 715
 716 if ARCH_MULTI_V7
 717
 718 comment "i.MX51 machines:"
 719
 720 config MACH_IMX51_DT
 721         bool "Support i.MX51 platforms from device tree"
 722         select SOC_IMX51
 723         help
 724           Include support for Freescale i.MX51 based platforms
 725           using the device tree for discovery
 726
 727 config MACH_MX51_BABBAGE
 728         bool "Support MX51 BABBAGE platforms"
 729         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 730         select IMX_HAVE_PLATFORM_IMX2_WDT
 731         select IMX_HAVE_PLATFORM_IMX_I2C
 732         select IMX_HAVE_PLATFORM_IMX_UART
 733         select IMX_HAVE_PLATFORM_MXC_EHCI
 734         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 735         select IMX_HAVE_PLATFORM_SPI_IMX
 736         select SOC_IMX51
 737         help
 738           Include support for MX51 Babbage platform, also known as MX51EVK in
 739           u-boot. This includes specific configurations for the board and its
 740           peripherals.
 741
 742 config MACH_EUKREA_CPUIMX51SD
 743         bool "Support Eukrea CPUIMX51SD module"
 744         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 745         select IMX_HAVE_PLATFORM_IMX2_WDT
 746         select IMX_HAVE_PLATFORM_IMX_I2C
 747         select IMX_HAVE_PLATFORM_IMX_UART
 748         select IMX_HAVE_PLATFORM_MXC_EHCI
 749         select IMX_HAVE_PLATFORM_MXC_NAND
 750         select IMX_HAVE_PLATFORM_SPI_IMX
 751         select SOC_IMX51
 752         help
 753           Include support for Eukrea CPUIMX51SD platform. This includes
 754           specific configurations for the module and its peripherals.
 755
 756 choice
 757         prompt "Baseboard"
 758         depends on MACH_EUKREA_CPUIMX51SD
 759         default MACH_EUKREA_MBIMXSD51_BASEBOARD
 760
 761 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 762         prompt "Eukrea MBIMXSD development board"
 763         bool
 764         select IMX_HAVE_PLATFORM_IMX_SSI
 765         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 766         select LEDS_GPIO_REGISTER
 767         help
 768           This adds board specific devices that can be found on Eukrea's
 769           MBIMXSD evaluation board.
 770
 771 endchoice
 772
 773 comment "Device tree only"
 774
 775 config  SOC_IMX53
 776         bool "i.MX53 support"
 777         select HAVE_IMX_SRC
 778         select IMX_HAVE_PLATFORM_IMX2_WDT
 779         select PINCTRL
 780         select PINCTRL_IMX53
 781         select SOC_IMX5
 782
 783         help
 784           This enables support for Freescale i.MX53 processor.
 785
 786 config SOC_IMX6Q
 787         bool "i.MX6 Quad/DualLite support"
 788         select ARCH_HAS_CPUFREQ
 789         select ARCH_HAS_OPP
 790         select ARM_ERRATA_754322
 791         select ARM_ERRATA_764369 if SMP
 792         select ARM_ERRATA_775420
 793         select ARM_GIC
 794         select COMMON_CLK
 795         select CPU_V7
 796         select HAVE_ARM_SCU if SMP
 797         select HAVE_ARM_TWD if SMP
 798         select HAVE_IMX_ANATOP
 799         select HAVE_IMX_GPC
 800         select HAVE_IMX_MMDC
 801         select HAVE_IMX_SRC
 802         select HAVE_SMP
 803         select MFD_SYSCON
 804         select PINCTRL
 805         select PINCTRL_IMX6Q
 806         select PL310_ERRATA_588369 if CACHE_PL310
 807         select PL310_ERRATA_727915 if CACHE_PL310
 808         select PL310_ERRATA_769419 if CACHE_PL310
 809         select PM_OPP if PM
 810
 811         help
 812           This enables support for Freescale i.MX6 Quad processor.
 813
 814 config SOC_IMX6SL
 815         bool "i.MX6 SoloLite support"
 816         select ARM_ERRATA_754322
 817         select ARM_ERRATA_775420
 818         select ARM_GIC
 819         select CPU_V7
 820         select HAVE_IMX_ANATOP
 821         select HAVE_IMX_GPC
 822         select HAVE_IMX_MMDC
 823         select HAVE_IMX_SRC
 824         select MFD_SYSCON
 825         select PINCTRL
 826         select PINCTRL_IMX6SL
 827         select PL310_ERRATA_588369 if CACHE_PL310
 828         select PL310_ERRATA_727915 if CACHE_PL310
 829         select PL310_ERRATA_769419 if CACHE_PL310
 830
 831         help
 832           This enables support for Freescale i.MX6 SoloLite processor.
 833
 834 config SOC_VF610
 835         bool "Vybrid Family VF610 support"
 836         select CPU_V7
 837         select ARM_GIC
 838         select CLKSRC_OF
 839         select PINCTRL
 840         select PINCTRL_VF610
 841         select VF_PIT_TIMER
 842         select PL310_ERRATA_588369 if CACHE_PL310
 843         select PL310_ERRATA_727915 if CACHE_PL310
 844         select PL310_ERRATA_769419 if CACHE_PL310
 845
 846         help
 847           This enable support for Freescale Vybrid VF610 processor.
 848
 849 endif
 850
 851 source "arch/arm/mach-imx/devices/Kconfig"
 852
 853 endmenu