arch/arm/mach-imx/Kconfig

   1 config ARCH_MXC
   2         bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
   3         select ARCH_REQUIRE_GPIOLIB
   4         select ARM_CPU_SUSPEND if PM
   5         select ARM_PATCH_PHYS_VIRT
   6         select AUTO_ZRELADDR if !ZBOOT_ROM
   7         select CLKSRC_MMIO
   8         select COMMON_CLK
   9         select GENERIC_ALLOCATOR
  10         select GENERIC_CLOCKEVENTS
  11         select GENERIC_IRQ_CHIP
  12         select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
  13         select MULTI_IRQ_HANDLER
  14         select PINCTRL
  15         select SOC_BUS
  16         select SPARSE_IRQ
  17         select USE_OF
  18         help
  19           Support for Freescale MXC/iMX-based family of processors
  20
  21 menu "Freescale i.MX support"
  22         depends on ARCH_MXC
  23
  24 config MXC_TZIC
  25         bool
  26
  27 config MXC_AVIC
  28         bool
  29
  30 config MXC_DEBUG_BOARD
  31         bool "Enable MXC debug board(for 3-stack)"
  32         help
  33           The debug board is an integral part of the MXC 3-stack(PDK)
  34           platforms, it can be attached or removed from the peripheral
  35           board. On debug board, several debug devices(ethernet, UART,
  36           buttons, LEDs and JTAG) are implemented. Between the MCU and
  37           these devices, a CPLD is added as a bridge which performs
  38           data/address de-multiplexing and decode, signal level shift,
  39           interrupt control and various board functions.
  40
  41 config HAVE_EPIT
  42         bool
  43
  44 config MXC_USE_EPIT
  45         bool "Use EPIT instead of GPT"
  46         depends on HAVE_EPIT
  47         help
  48           Use EPIT as the system timer on systems that have it. Normally you
  49           don't have a reason to do so as the EPIT has the same features and
  50           uses the same clocks as the GPT. Anyway, on some systems the GPT
  51           may be in use for other purposes.
  52
  53 config ARCH_HAS_RNGA
  54         bool
  55
  56 config HAVE_IMX_ANATOP
  57         bool
  58
  59 config HAVE_IMX_GPC
  60         bool
  61
  62 config HAVE_IMX_MMDC
  63         bool
  64
  65 config HAVE_IMX_SRC
  66         def_bool y if SMP
  67         select ARCH_HAS_RESET_CONTROLLER
  68
  69 config IMX_HAVE_IOMUX_V1
  70         bool
  71
  72 config ARCH_MXC_IOMUX_V3
  73         bool
  74
  75 config ARCH_MX1
  76         bool
  77
  78 config ARCH_MX25
  79         bool
  80
  81 config MACH_MX27
  82         bool
  83
  84 config SOC_IMX1
  85         bool
  86         select ARCH_MX1
  87         select CPU_ARM920T
  88         select IMX_HAVE_IOMUX_V1
  89         select MXC_AVIC
  90
  91 config SOC_IMX21
  92         bool
  93         select CPU_ARM926T
  94         select IMX_HAVE_IOMUX_V1
  95         select MXC_AVIC
  96
  97 config SOC_IMX25
  98         bool
  99         select ARCH_MX25
 100         select ARCH_MXC_IOMUX_V3
 101         select CPU_ARM926T
 102         select MXC_AVIC
 103         select PINCTRL_IMX25
 104
 105 config SOC_IMX27
 106         bool
 107         select ARCH_HAS_CPUFREQ
 108         select ARCH_HAS_OPP
 109         select CPU_ARM926T
 110         select IMX_HAVE_IOMUX_V1
 111         select MACH_MX27
 112         select MXC_AVIC
 113         select PINCTRL_IMX27
 114
 115 config SOC_IMX31
 116         bool
 117         select CPU_V6
 118         select IMX_HAVE_PLATFORM_MXC_RNGA
 119         select MXC_AVIC
 120         select SMP_ON_UP if SMP
 121
 122 config SOC_IMX35
 123         bool
 124         select ARCH_MXC_IOMUX_V3
 125         select CPU_V6K
 126         select HAVE_EPIT
 127         select MXC_AVIC
 128         select SMP_ON_UP if SMP
 129         select PINCTRL
 130
 131 config SOC_IMX5
 132         bool
 133         select ARCH_HAS_CPUFREQ
 134         select ARCH_HAS_OPP
 135         select ARCH_MXC_IOMUX_V3
 136         select CPU_V7
 137         select MXC_TZIC
 138
 139 config  SOC_IMX51
 140         bool
 141         select HAVE_IMX_SRC
 142         select PINCTRL_IMX51
 143         select SOC_IMX5
 144
 145 if ARCH_MULTI_V4T
 146
 147 comment "MX1 platforms:"
 148 config MACH_MXLADS
 149         bool
 150
 151 config ARCH_MX1ADS
 152         bool "MX1ADS platform"
 153         select IMX_HAVE_PLATFORM_IMX_I2C
 154         select IMX_HAVE_PLATFORM_IMX_UART
 155         select MACH_MXLADS
 156         select SOC_IMX1
 157         help
 158           Say Y here if you are using Motorola MX1ADS/MXLADS boards
 159
 160 config MACH_SCB9328
 161         bool "Synertronixx scb9328"
 162         select IMX_HAVE_PLATFORM_IMX_UART
 163         select SOC_IMX1
 164         help
 165           Say Y here if you are using a Synertronixx scb9328 board
 166
 167 config MACH_APF9328
 168         bool "APF9328"
 169         select IMX_HAVE_PLATFORM_IMX_I2C
 170         select IMX_HAVE_PLATFORM_IMX_UART
 171         select SOC_IMX1
 172         help
 173           Say Yes here if you are using the Armadeus APF9328 development board
 174
 175 endif
 176
 177 if ARCH_MULTI_V5
 178
 179 comment "MX21 platforms:"
 180
 181 config MACH_MX21ADS
 182         bool "MX21ADS platform"
 183         select IMX_HAVE_PLATFORM_IMX_FB
 184         select IMX_HAVE_PLATFORM_IMX_UART
 185         select IMX_HAVE_PLATFORM_MXC_MMC
 186         select IMX_HAVE_PLATFORM_MXC_NAND
 187         select SOC_IMX21
 188         help
 189           Include support for MX21ADS platform. This includes specific
 190           configurations for the board and its peripherals.
 191
 192 comment "MX25 platforms:"
 193
 194 config MACH_MX25_3DS
 195         bool "Support MX25PDK (3DS) Platform"
 196         select IMX_HAVE_PLATFORM_FLEXCAN
 197         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 198         select IMX_HAVE_PLATFORM_IMX2_WDT
 199         select IMX_HAVE_PLATFORM_IMXDI_RTC
 200         select IMX_HAVE_PLATFORM_IMX_FB
 201         select IMX_HAVE_PLATFORM_IMX_I2C
 202         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 203         select IMX_HAVE_PLATFORM_IMX_UART
 204         select IMX_HAVE_PLATFORM_MXC_EHCI
 205         select IMX_HAVE_PLATFORM_MXC_NAND
 206         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 207         select SOC_IMX25
 208
 209 config MACH_EUKREA_CPUIMX25SD
 210         bool "Support Eukrea CPUIMX25 Platform"
 211         select IMX_HAVE_PLATFORM_FLEXCAN
 212         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 213         select IMX_HAVE_PLATFORM_IMX2_WDT
 214         select IMX_HAVE_PLATFORM_IMXDI_RTC
 215         select IMX_HAVE_PLATFORM_IMX_FB
 216         select IMX_HAVE_PLATFORM_IMX_I2C
 217         select IMX_HAVE_PLATFORM_IMX_UART
 218         select IMX_HAVE_PLATFORM_MXC_EHCI
 219         select IMX_HAVE_PLATFORM_MXC_NAND
 220         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 221         select USB_ULPI_VIEWPORT if USB_ULPI
 222         select SOC_IMX25
 223
 224 choice
 225         prompt "Baseboard"
 226         depends on MACH_EUKREA_CPUIMX25SD
 227         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 228
 229 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 230         bool "Eukrea MBIMXSD development board"
 231         select IMX_HAVE_PLATFORM_GPIO_KEYS
 232         select IMX_HAVE_PLATFORM_IMX_SSI
 233         select IMX_HAVE_PLATFORM_SPI_IMX
 234         select LEDS_GPIO_REGISTER
 235         help
 236           This adds board specific devices that can be found on Eukrea's
 237           MBIMXSD evaluation board.
 238
 239 endchoice
 240
 241 config MACH_IMX25_DT
 242         bool "Support i.MX25 platforms from device tree"
 243         select SOC_IMX25
 244         help
 245           Include support for Freescale i.MX25 based platforms
 246           using the device tree for discovery
 247
 248 comment "MX27 platforms:"
 249
 250 config MACH_MX27ADS
 251         bool "MX27ADS platform"
 252         select IMX_HAVE_PLATFORM_IMX_FB
 253         select IMX_HAVE_PLATFORM_IMX_I2C
 254         select IMX_HAVE_PLATFORM_IMX_UART
 255         select IMX_HAVE_PLATFORM_MXC_MMC
 256         select IMX_HAVE_PLATFORM_MXC_NAND
 257         select IMX_HAVE_PLATFORM_MXC_W1
 258         select SOC_IMX27
 259         help
 260           Include support for MX27ADS platform. This includes specific
 261           configurations for the board and its peripherals.
 262
 263 config MACH_PCM038
 264         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 265         select IMX_HAVE_PLATFORM_IMX2_WDT
 266         select IMX_HAVE_PLATFORM_IMX_I2C
 267         select IMX_HAVE_PLATFORM_IMX_UART
 268         select IMX_HAVE_PLATFORM_MXC_EHCI
 269         select IMX_HAVE_PLATFORM_MXC_NAND
 270         select IMX_HAVE_PLATFORM_MXC_W1
 271         select IMX_HAVE_PLATFORM_SPI_IMX
 272         select USB_ULPI_VIEWPORT if USB_ULPI
 273         select SOC_IMX27
 274         help
 275           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 276           includes specific configurations for the module and its peripherals.
 277
 278 choice
 279         prompt "Baseboard"
 280         depends on MACH_PCM038
 281         default MACH_PCM970_BASEBOARD
 282
 283 config MACH_PCM970_BASEBOARD
 284         bool "PHYTEC PCM970 development board"
 285         select IMX_HAVE_PLATFORM_IMX_FB
 286         select IMX_HAVE_PLATFORM_MXC_MMC
 287         help
 288           This adds board specific devices that can be found on Phytec's
 289           PCM970 evaluation board.
 290
 291 endchoice
 292
 293 config MACH_CPUIMX27
 294         bool "Eukrea CPUIMX27 module"
 295         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 296         select IMX_HAVE_PLATFORM_IMX2_WDT
 297         select IMX_HAVE_PLATFORM_IMX_I2C
 298         select IMX_HAVE_PLATFORM_IMX_UART
 299         select IMX_HAVE_PLATFORM_MXC_EHCI
 300         select IMX_HAVE_PLATFORM_MXC_NAND
 301         select IMX_HAVE_PLATFORM_MXC_W1
 302         select USB_ULPI_VIEWPORT if USB_ULPI
 303         select SOC_IMX27
 304         help
 305           Include support for Eukrea CPUIMX27 platform. This includes
 306           specific configurations for the module and its peripherals.
 307
 308 config MACH_EUKREA_CPUIMX27_USESDHC2
 309         bool "CPUIMX27 integrates SDHC2 module"
 310         depends on MACH_CPUIMX27
 311         select IMX_HAVE_PLATFORM_MXC_MMC
 312         help
 313           This adds support for the internal SDHC2 used on CPUIMX27
 314           for wifi or eMMC.
 315
 316 config MACH_EUKREA_CPUIMX27_USEUART4
 317         bool "CPUIMX27 integrates UART4 module"
 318         depends on MACH_CPUIMX27
 319         help
 320           This adds support for the internal UART4 used on CPUIMX27
 321           for bluetooth.
 322
 323 choice
 324         prompt "Baseboard"
 325         depends on MACH_CPUIMX27
 326         default MACH_EUKREA_MBIMX27_BASEBOARD
 327
 328 config MACH_EUKREA_MBIMX27_BASEBOARD
 329         bool "Eukrea MBIMX27 development board"
 330         select IMX_HAVE_PLATFORM_IMX_FB
 331         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 332         select IMX_HAVE_PLATFORM_IMX_SSI
 333         select IMX_HAVE_PLATFORM_IMX_UART
 334         select IMX_HAVE_PLATFORM_MXC_MMC
 335         select IMX_HAVE_PLATFORM_SPI_IMX
 336         select LEDS_GPIO_REGISTER
 337         help
 338           This adds board specific devices that can be found on Eukrea's
 339           MBIMX27 evaluation board.
 340
 341 endchoice
 342
 343 config MACH_MX27_3DS
 344         bool "MX27PDK platform"
 345         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 346         select IMX_HAVE_PLATFORM_IMX2_WDT
 347         select IMX_HAVE_PLATFORM_IMX_FB
 348         select IMX_HAVE_PLATFORM_IMX_I2C
 349         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 350         select IMX_HAVE_PLATFORM_IMX_SSI
 351         select IMX_HAVE_PLATFORM_IMX_UART
 352         select IMX_HAVE_PLATFORM_MX2_CAMERA
 353         select IMX_HAVE_PLATFORM_MXC_EHCI
 354         select IMX_HAVE_PLATFORM_MXC_MMC
 355         select IMX_HAVE_PLATFORM_SPI_IMX
 356         select MXC_DEBUG_BOARD
 357         select USB_ULPI_VIEWPORT if USB_ULPI
 358         select SOC_IMX27
 359         help
 360           Include support for MX27PDK platform. This includes specific
 361           configurations for the board and its peripherals.
 362
 363 config MACH_IMX27_VISSTRIM_M10
 364         bool "Vista Silicon i.MX27 Visstrim_m10"
 365         select IMX_HAVE_PLATFORM_GPIO_KEYS
 366         select IMX_HAVE_PLATFORM_IMX_I2C
 367         select IMX_HAVE_PLATFORM_IMX_SSI
 368         select IMX_HAVE_PLATFORM_IMX_UART
 369         select IMX_HAVE_PLATFORM_MX2_CAMERA
 370         select IMX_HAVE_PLATFORM_MX2_EMMA
 371         select IMX_HAVE_PLATFORM_MXC_EHCI
 372         select IMX_HAVE_PLATFORM_MXC_MMC
 373         select LEDS_GPIO_REGISTER
 374         select SOC_IMX27
 375         help
 376           Include support for Visstrim_m10 platform and its different variants.
 377           This includes specific configurations for the board and its
 378           peripherals.
 379
 380 config MACH_IMX27LITE
 381         bool "LogicPD MX27 LITEKIT platform"
 382         select IMX_HAVE_PLATFORM_IMX_SSI
 383         select IMX_HAVE_PLATFORM_IMX_UART
 384         select SOC_IMX27
 385         help
 386           Include support for MX27 LITEKIT platform. This includes specific
 387           configurations for the board and its peripherals.
 388
 389 config MACH_PCA100
 390         bool "Phytec phyCARD-s (pca100)"
 391         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 392         select IMX_HAVE_PLATFORM_IMX2_WDT
 393         select IMX_HAVE_PLATFORM_IMX_FB
 394         select IMX_HAVE_PLATFORM_IMX_I2C
 395         select IMX_HAVE_PLATFORM_IMX_SSI
 396         select IMX_HAVE_PLATFORM_IMX_UART
 397         select IMX_HAVE_PLATFORM_MXC_EHCI
 398         select IMX_HAVE_PLATFORM_MXC_MMC
 399         select IMX_HAVE_PLATFORM_MXC_NAND
 400         select IMX_HAVE_PLATFORM_MXC_W1
 401         select IMX_HAVE_PLATFORM_SPI_IMX
 402         select USB_ULPI_VIEWPORT if USB_ULPI
 403         select SOC_IMX27
 404         help
 405           Include support for phyCARD-s (aka pca100) platform. This
 406           includes specific configurations for the module and its peripherals.
 407
 408 config MACH_MXT_TD60
 409         bool "Maxtrack i-MXT TD60"
 410         select IMX_HAVE_PLATFORM_IMX_FB
 411         select IMX_HAVE_PLATFORM_IMX_I2C
 412         select IMX_HAVE_PLATFORM_IMX_UART
 413         select IMX_HAVE_PLATFORM_MXC_MMC
 414         select IMX_HAVE_PLATFORM_MXC_NAND
 415         select SOC_IMX27
 416         help
 417           Include support for i-MXT (aka td60) platform. This
 418           includes specific configurations for the module and its peripherals.
 419
 420 config MACH_IMX27IPCAM
 421         bool "IMX27 IPCAM platform"
 422         select IMX_HAVE_PLATFORM_IMX2_WDT
 423         select IMX_HAVE_PLATFORM_IMX_UART
 424         select SOC_IMX27
 425         help
 426           Include support for IMX27 IPCAM platform. This includes specific
 427           configurations for the board and its peripherals.
 428
 429 config MACH_IMX27_DT
 430         bool "Support i.MX27 platforms from device tree"
 431         select SOC_IMX27
 432         help
 433           Include support for Freescale i.MX27 based platforms
 434           using the device tree for discovery
 435
 436 endif
 437
 438 if ARCH_MULTI_V6
 439
 440 comment "MX31 platforms:"
 441
 442 config MACH_MX31ADS
 443         bool "Support MX31ADS platforms"
 444         default y
 445         select IMX_HAVE_PLATFORM_IMX_I2C
 446         select IMX_HAVE_PLATFORM_IMX_SSI
 447         select IMX_HAVE_PLATFORM_IMX_UART
 448         select SOC_IMX31
 449         help
 450           Include support for MX31ADS platform. This includes specific
 451           configurations for the board and its peripherals.
 452
 453 config MACH_MX31ADS_WM1133_EV1
 454         bool "Support Wolfson Microelectronics 1133-EV1 module"
 455         depends on MACH_MX31ADS
 456         depends on MFD_WM8350_I2C
 457         depends on REGULATOR_WM8350 = y
 458         help
 459           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 460           and audio module for the MX31ADS platform.
 461
 462 config MACH_MX31LILLY
 463         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 464         select IMX_HAVE_PLATFORM_IMX_UART
 465         select IMX_HAVE_PLATFORM_IPU_CORE
 466         select IMX_HAVE_PLATFORM_MXC_EHCI
 467         select IMX_HAVE_PLATFORM_MXC_MMC
 468         select IMX_HAVE_PLATFORM_SPI_IMX
 469         select USB_ULPI_VIEWPORT if USB_ULPI
 470         select SOC_IMX31
 471         help
 472           Include support for mx31 based LILLY1131 modules. This includes
 473           specific configurations for the board and its peripherals.
 474
 475 config MACH_MX31LITE
 476         bool "Support MX31 LITEKIT (LogicPD)"
 477         select IMX_HAVE_PLATFORM_IMX2_WDT
 478         select IMX_HAVE_PLATFORM_IMX_UART
 479         select IMX_HAVE_PLATFORM_MXC_EHCI
 480         select IMX_HAVE_PLATFORM_MXC_MMC
 481         select IMX_HAVE_PLATFORM_MXC_NAND
 482         select IMX_HAVE_PLATFORM_MXC_RTC
 483         select IMX_HAVE_PLATFORM_SPI_IMX
 484         select LEDS_GPIO_REGISTER
 485         select USB_ULPI_VIEWPORT if USB_ULPI
 486         select SOC_IMX31
 487         help
 488           Include support for MX31 LITEKIT platform. This includes specific
 489           configurations for the board and its peripherals.
 490
 491 config MACH_PCM037
 492         bool "Support Phytec pcm037 (i.MX31) platforms"
 493         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 494         select IMX_HAVE_PLATFORM_IMX2_WDT
 495         select IMX_HAVE_PLATFORM_IMX_I2C
 496         select IMX_HAVE_PLATFORM_IMX_UART
 497         select IMX_HAVE_PLATFORM_IPU_CORE
 498         select IMX_HAVE_PLATFORM_MXC_EHCI
 499         select IMX_HAVE_PLATFORM_MXC_MMC
 500         select IMX_HAVE_PLATFORM_MXC_NAND
 501         select IMX_HAVE_PLATFORM_MXC_W1
 502         select USB_ULPI_VIEWPORT if USB_ULPI
 503         select SOC_IMX31
 504         help
 505           Include support for Phytec pcm037 platform. This includes
 506           specific configurations for the board and its peripherals.
 507
 508 config MACH_PCM037_EET
 509         bool "Support pcm037 EET board extensions"
 510         depends on MACH_PCM037
 511         select IMX_HAVE_PLATFORM_GPIO_KEYS
 512         select IMX_HAVE_PLATFORM_SPI_IMX
 513         help
 514           Add support for PCM037 EET baseboard extensions. If you are using the
 515           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 516           command-line parameter.
 517
 518 config MACH_MX31_3DS
 519         bool "Support MX31PDK (3DS)"
 520         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 521         select IMX_HAVE_PLATFORM_IMX2_WDT
 522         select IMX_HAVE_PLATFORM_IMX_I2C
 523         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 524         select IMX_HAVE_PLATFORM_IMX_SSI
 525         select IMX_HAVE_PLATFORM_IMX_UART
 526         select IMX_HAVE_PLATFORM_IPU_CORE
 527         select IMX_HAVE_PLATFORM_MXC_EHCI
 528         select IMX_HAVE_PLATFORM_MXC_MMC
 529         select IMX_HAVE_PLATFORM_MXC_NAND
 530         select IMX_HAVE_PLATFORM_SPI_IMX
 531         select MXC_DEBUG_BOARD
 532         select USB_ULPI_VIEWPORT if USB_ULPI
 533         select SOC_IMX31
 534         help
 535           Include support for MX31PDK (3DS) platform. This includes specific
 536           configurations for the board and its peripherals.
 537
 538 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 539         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 540         depends on MACH_MX31_3DS
 541         depends on MTD_NAND_MXC
 542         help
 543           Enable this if you want that the MXC NAND driver uses the in flash
 544           Bad Block Table to know what blocks are bad instead of scanning the
 545           entire flash looking for bad block markers.
 546
 547 config MACH_MX31MOBOARD
 548         bool "Support mx31moboard platforms (EPFL Mobots group)"
 549         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 550         select IMX_HAVE_PLATFORM_IMX2_WDT
 551         select IMX_HAVE_PLATFORM_IMX_I2C
 552         select IMX_HAVE_PLATFORM_IMX_SSI
 553         select IMX_HAVE_PLATFORM_IMX_UART
 554         select IMX_HAVE_PLATFORM_IPU_CORE
 555         select IMX_HAVE_PLATFORM_MXC_EHCI
 556         select IMX_HAVE_PLATFORM_MXC_MMC
 557         select IMX_HAVE_PLATFORM_SPI_IMX
 558         select LEDS_GPIO_REGISTER
 559         select USB_ULPI_VIEWPORT if USB_ULPI
 560         select SOC_IMX31
 561         help
 562           Include support for mx31moboard platform. This includes specific
 563           configurations for the board and its peripherals.
 564
 565 config MACH_QONG
 566         bool "Support Dave/DENX QongEVB-LITE platform"
 567         select IMX_HAVE_PLATFORM_IMX2_WDT
 568         select IMX_HAVE_PLATFORM_IMX_UART
 569         select SOC_IMX31
 570         help
 571           Include support for Dave/DENX QongEVB-LITE platform. This includes
 572           specific configurations for the board and its peripherals.
 573
 574 config MACH_ARMADILLO5X0
 575         bool "Support Atmark Armadillo-500 Development Base Board"
 576         select IMX_HAVE_PLATFORM_GPIO_KEYS
 577         select IMX_HAVE_PLATFORM_IMX_I2C
 578         select IMX_HAVE_PLATFORM_IMX_UART
 579         select IMX_HAVE_PLATFORM_IPU_CORE
 580         select IMX_HAVE_PLATFORM_MXC_EHCI
 581         select IMX_HAVE_PLATFORM_MXC_MMC
 582         select IMX_HAVE_PLATFORM_MXC_NAND
 583         select USB_ULPI_VIEWPORT if USB_ULPI
 584         select SOC_IMX31
 585         help
 586           Include support for Atmark Armadillo-500 platform. This includes
 587           specific configurations for the board and its peripherals.
 588
 589 config MACH_KZM_ARM11_01
 590         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 591         select IMX_HAVE_PLATFORM_IMX_UART
 592         select SOC_IMX31
 593         help
 594           Include support for KZM-ARM11-01. This includes specific
 595           configurations for the board and its peripherals.
 596
 597 config MACH_BUG
 598         bool "Support Buglabs BUGBase platform"
 599         default y
 600         select IMX_HAVE_PLATFORM_IMX_UART
 601         select SOC_IMX31
 602         help
 603           Include support for BUGBase 1.3 platform. This includes specific
 604           configurations for the board and its peripherals.
 605
 606 config MACH_IMX31_DT
 607         bool "Support i.MX31 platforms from device tree"
 608         select SOC_IMX31
 609         help
 610           Include support for Freescale i.MX31 based platforms
 611           using the device tree for discovery.
 612
 613 comment "MX35 platforms:"
 614
 615 config MACH_IMX35_DT
 616         bool "Support i.MX35 platforms from device tree"
 617         select SOC_IMX35
 618         help
 619           Include support for Freescale i.MX35 based platforms
 620           using the device tree for discovery.
 621
 622 config MACH_PCM043
 623         bool "Support Phytec pcm043 (i.MX35) platforms"
 624         select IMX_HAVE_PLATFORM_FLEXCAN
 625         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 626         select IMX_HAVE_PLATFORM_IMX2_WDT
 627         select IMX_HAVE_PLATFORM_IMX_I2C
 628         select IMX_HAVE_PLATFORM_IMX_SSI
 629         select IMX_HAVE_PLATFORM_IMX_UART
 630         select IMX_HAVE_PLATFORM_IPU_CORE
 631         select IMX_HAVE_PLATFORM_MXC_EHCI
 632         select IMX_HAVE_PLATFORM_MXC_NAND
 633         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 634         select USB_ULPI_VIEWPORT if USB_ULPI
 635         select SOC_IMX35
 636         help
 637           Include support for Phytec pcm043 platform. This includes
 638           specific configurations for the board and its peripherals.
 639
 640 config MACH_MX35_3DS
 641         bool "Support MX35PDK platform"
 642         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 643         select IMX_HAVE_PLATFORM_IMX2_WDT
 644         select IMX_HAVE_PLATFORM_IMX_FB
 645         select IMX_HAVE_PLATFORM_IMX_I2C
 646         select IMX_HAVE_PLATFORM_IMX_UART
 647         select IMX_HAVE_PLATFORM_IPU_CORE
 648         select IMX_HAVE_PLATFORM_MXC_EHCI
 649         select IMX_HAVE_PLATFORM_MXC_NAND
 650         select IMX_HAVE_PLATFORM_MXC_RTC
 651         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 652         select MXC_DEBUG_BOARD
 653         select SOC_IMX35
 654         help
 655           Include support for MX35PDK platform. This includes specific
 656           configurations for the board and its peripherals.
 657
 658 config MACH_EUKREA_CPUIMX35SD
 659         bool "Support Eukrea CPUIMX35 Platform"
 660         select IMX_HAVE_PLATFORM_FLEXCAN
 661         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 662         select IMX_HAVE_PLATFORM_IMX2_WDT
 663         select IMX_HAVE_PLATFORM_IMX_I2C
 664         select IMX_HAVE_PLATFORM_IMX_UART
 665         select IMX_HAVE_PLATFORM_MXC_EHCI
 666         select IMX_HAVE_PLATFORM_MXC_NAND
 667         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 668         select USB_ULPI_VIEWPORT if USB_ULPI
 669         select SOC_IMX35
 670         help
 671           Include support for Eukrea CPUIMX35 platform. This includes
 672           specific configurations for the board and its peripherals.
 673
 674 choice
 675         prompt "Baseboard"
 676         depends on MACH_EUKREA_CPUIMX35SD
 677         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 678
 679 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 680         bool "Eukrea MBIMXSD development board"
 681         select IMX_HAVE_PLATFORM_GPIO_KEYS
 682         select IMX_HAVE_PLATFORM_IMX_SSI
 683         select IMX_HAVE_PLATFORM_IPU_CORE
 684         select IMX_HAVE_PLATFORM_SPI_IMX
 685         select LEDS_GPIO_REGISTER
 686         help
 687           This adds board specific devices that can be found on Eukrea's
 688           MBIMXSD evaluation board.
 689
 690 endchoice
 691
 692 config MACH_VPR200
 693         bool "Support VPR200 platform"
 694         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 695         select IMX_HAVE_PLATFORM_GPIO_KEYS
 696         select IMX_HAVE_PLATFORM_IMX2_WDT
 697         select IMX_HAVE_PLATFORM_IMX_I2C
 698         select IMX_HAVE_PLATFORM_IMX_UART
 699         select IMX_HAVE_PLATFORM_IPU_CORE
 700         select IMX_HAVE_PLATFORM_MXC_EHCI
 701         select IMX_HAVE_PLATFORM_MXC_NAND
 702         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 703         select SOC_IMX35
 704         help
 705           Include support for VPR200 platform. This includes specific
 706           configurations for the board and its peripherals.
 707
 708 endif
 709
 710 if ARCH_MULTI_V7
 711
 712 comment "i.MX51 machines:"
 713
 714 config MACH_IMX51_DT
 715         bool "Support i.MX51 platforms from device tree"
 716         select SOC_IMX51
 717         help
 718           Include support for Freescale i.MX51 based platforms
 719           using the device tree for discovery
 720
 721 config MACH_MX51_BABBAGE
 722         bool "Support MX51 BABBAGE platforms"
 723         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 724         select IMX_HAVE_PLATFORM_IMX2_WDT
 725         select IMX_HAVE_PLATFORM_IMX_I2C
 726         select IMX_HAVE_PLATFORM_IMX_UART
 727         select IMX_HAVE_PLATFORM_MXC_EHCI
 728         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 729         select IMX_HAVE_PLATFORM_SPI_IMX
 730         select SOC_IMX51
 731         help
 732           Include support for MX51 Babbage platform, also known as MX51EVK in
 733           u-boot. This includes specific configurations for the board and its
 734           peripherals.
 735
 736 config MACH_EUKREA_CPUIMX51SD
 737         bool "Support Eukrea CPUIMX51SD module"
 738         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 739         select IMX_HAVE_PLATFORM_IMX2_WDT
 740         select IMX_HAVE_PLATFORM_IMX_I2C
 741         select IMX_HAVE_PLATFORM_IMX_UART
 742         select IMX_HAVE_PLATFORM_MXC_EHCI
 743         select IMX_HAVE_PLATFORM_MXC_NAND
 744         select IMX_HAVE_PLATFORM_SPI_IMX
 745         select SOC_IMX51
 746         help
 747           Include support for Eukrea CPUIMX51SD platform. This includes
 748           specific configurations for the module and its peripherals.
 749
 750 choice
 751         prompt "Baseboard"
 752         depends on MACH_EUKREA_CPUIMX51SD
 753         default MACH_EUKREA_MBIMXSD51_BASEBOARD
 754
 755 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 756         prompt "Eukrea MBIMXSD development board"
 757         bool
 758         select IMX_HAVE_PLATFORM_IMX_SSI
 759         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 760         select LEDS_GPIO_REGISTER
 761         help
 762           This adds board specific devices that can be found on Eukrea's
 763           MBIMXSD evaluation board.
 764
 765 endchoice
 766
 767 comment "Device tree only"
 768
 769 config  SOC_IMX50
 770         bool "i.MX50 support"
 771         select HAVE_IMX_SRC
 772         select PINCTRL_IMX50
 773         select SOC_IMX5
 774
 775         help
 776           This enables support for Freescale i.MX50 processor.
 777
 778 config  SOC_IMX53
 779         bool "i.MX53 support"
 780         select HAVE_IMX_SRC
 781         select IMX_HAVE_PLATFORM_IMX2_WDT
 782         select PINCTRL_IMX53
 783         select SOC_IMX5
 784
 785         help
 786           This enables support for Freescale i.MX53 processor.
 787
 788 config SOC_IMX6Q
 789         bool "i.MX6 Quad/DualLite support"
 790         select ARCH_HAS_CPUFREQ
 791         select ARCH_HAS_OPP
 792         select ARM_ERRATA_754322
 793         select ARM_ERRATA_764369 if SMP
 794         select ARM_ERRATA_775420
 795         select ARM_GIC
 796         select CPU_V7
 797         select HAVE_ARM_SCU if SMP
 798         select HAVE_ARM_TWD if SMP
 799         select HAVE_IMX_ANATOP
 800         select HAVE_IMX_GPC
 801         select HAVE_IMX_MMDC
 802         select HAVE_IMX_SRC
 803         select HAVE_SMP
 804         select MFD_SYSCON
 805         select MIGHT_HAVE_PCI
 806         select PCI_DOMAINS if PCI
 807         select PINCTRL_IMX6Q
 808         select PL310_ERRATA_588369 if CACHE_PL310
 809         select PL310_ERRATA_727915 if CACHE_PL310
 810         select PL310_ERRATA_769419 if CACHE_PL310
 811         select PM_OPP if PM
 812
 813         help
 814           This enables support for Freescale i.MX6 Quad processor.
 815
 816 config SOC_IMX6SL
 817         bool "i.MX6 SoloLite support"
 818         select ARM_ERRATA_754322
 819         select ARM_ERRATA_775420
 820         select ARM_GIC
 821         select CPU_V7
 822         select HAVE_IMX_ANATOP
 823         select HAVE_IMX_GPC
 824         select HAVE_IMX_MMDC
 825         select HAVE_IMX_SRC
 826         select MFD_SYSCON
 827         select PINCTRL_IMX6SL
 828         select PL310_ERRATA_588369 if CACHE_PL310
 829         select PL310_ERRATA_727915 if CACHE_PL310
 830         select PL310_ERRATA_769419 if CACHE_PL310
 831
 832         help
 833           This enables support for Freescale i.MX6 SoloLite processor.
 834
 835 config SOC_VF610
 836         bool "Vybrid Family VF610 support"
 837         select CPU_V7
 838         select ARM_GIC
 839         select CLKSRC_OF
 840         select PINCTRL_VF610
 841         select VF_PIT_TIMER
 842         select PL310_ERRATA_588369 if CACHE_PL310
 843         select PL310_ERRATA_727915 if CACHE_PL310
 844         select PL310_ERRATA_769419 if CACHE_PL310
 845
 846         help
 847           This enable support for Freescale Vybrid VF610 processor.
 848
 849 endif
 850
 851 source "arch/arm/mach-imx/devices/Kconfig"
 852
 853 endmenu