arch/arm/mach-imx/Kconfig

   1 config IMX_HAVE_DMA_V1
   2         bool
   3
   4 config HAVE_IMX_GPC
   5         bool
   6
   7 config HAVE_IMX_MMDC
   8         bool
   9
  10 config HAVE_IMX_SRC
  11         bool
  12
  13 config ARCH_MX1
  14         bool
  15
  16 config MACH_MX21
  17         bool
  18
  19 config ARCH_MX25
  20         bool
  21
  22 config MACH_MX27
  23         bool
  24
  25 config ARCH_MX5
  26         bool
  27
  28 config ARCH_MX50
  29         bool
  30
  31 config ARCH_MX51
  32         bool
  33
  34 config ARCH_MX53
  35         bool
  36
  37 config SOC_IMX1
  38         bool
  39         select ARCH_MX1
  40         select CPU_ARM920T
  41         select IMX_HAVE_DMA_V1
  42         select IMX_HAVE_IOMUX_V1
  43         select MXC_AVIC
  44
  45 config SOC_IMX21
  46         bool
  47         select MACH_MX21
  48         select CPU_ARM926T
  49         select ARCH_MXC_AUDMUX_V1
  50         select IMX_HAVE_DMA_V1
  51         select IMX_HAVE_IOMUX_V1
  52         select MXC_AVIC
  53
  54 config SOC_IMX25
  55         bool
  56         select ARCH_MX25
  57         select CPU_ARM926T
  58         select ARCH_MXC_AUDMUX_V2
  59         select ARCH_MXC_IOMUX_V3
  60         select MXC_AVIC
  61
  62 config SOC_IMX27
  63         bool
  64         select MACH_MX27
  65         select CPU_ARM926T
  66         select ARCH_MXC_AUDMUX_V1
  67         select IMX_HAVE_DMA_V1
  68         select IMX_HAVE_IOMUX_V1
  69         select MXC_AVIC
  70
  71 config SOC_IMX31
  72         bool
  73         select CPU_V6
  74         select IMX_HAVE_PLATFORM_MXC_RNGA
  75         select ARCH_MXC_AUDMUX_V2
  76         select MXC_AVIC
  77         select SMP_ON_UP if SMP
  78
  79 config SOC_IMX35
  80         bool
  81         select CPU_V6
  82         select ARCH_MXC_IOMUX_V3
  83         select ARCH_MXC_AUDMUX_V2
  84         select HAVE_EPIT
  85         select MXC_AVIC
  86         select SMP_ON_UP if SMP
  87
  88 config SOC_IMX5
  89         select CPU_V7
  90         select MXC_TZIC
  91         select ARCH_MXC_IOMUX_V3
  92         select ARCH_MXC_AUDMUX_V2
  93         select ARCH_HAS_CPUFREQ
  94         select ARCH_MX5
  95         bool
  96
  97 config SOC_IMX50
  98         bool
  99         select SOC_IMX5
 100         select ARCH_MX50
 101
 102 config  SOC_IMX51
 103         bool
 104         select SOC_IMX5
 105         select ARCH_MX5
 106         select ARCH_MX51
 107
 108 config  SOC_IMX53
 109         bool
 110         select SOC_IMX5
 111         select ARCH_MX5
 112         select ARCH_MX53
 113
 114 if ARCH_IMX_V4_V5
 115
 116 comment "MX1 platforms:"
 117 config MACH_MXLADS
 118         bool
 119
 120 config ARCH_MX1ADS
 121         bool "MX1ADS platform"
 122         select MACH_MXLADS
 123         select SOC_IMX1
 124         select IMX_HAVE_PLATFORM_IMX_I2C
 125         select IMX_HAVE_PLATFORM_IMX_UART
 126         help
 127           Say Y here if you are using Motorola MX1ADS/MXLADS boards
 128
 129 config MACH_SCB9328
 130         bool "Synertronixx scb9328"
 131         select IMX_HAVE_PLATFORM_IMX_UART
 132         help
 133           Say Y here if you are using a Synertronixx scb9328 board
 134
 135 config MACH_APF9328
 136         bool "APF9328"
 137         select SOC_IMX1
 138         select IMX_HAVE_PLATFORM_IMX_I2C
 139         select IMX_HAVE_PLATFORM_IMX_UART
 140         help
 141           Say Yes here if you are using the Armadeus APF9328 development board
 142
 143 comment "MX21 platforms:"
 144
 145 config MACH_MX21ADS
 146         bool "MX21ADS platform"
 147         select SOC_IMX21
 148         select IMX_HAVE_PLATFORM_IMX_FB
 149         select IMX_HAVE_PLATFORM_IMX_UART
 150         select IMX_HAVE_PLATFORM_MXC_MMC
 151         select IMX_HAVE_PLATFORM_MXC_NAND
 152         help
 153           Include support for MX21ADS platform. This includes specific
 154           configurations for the board and its peripherals.
 155
 156 comment "MX25 platforms:"
 157
 158 config MACH_MX25_3DS
 159         bool "Support MX25PDK (3DS) Platform"
 160         select SOC_IMX25
 161         select IMX_HAVE_PLATFORM_FLEXCAN
 162         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 163         select IMX_HAVE_PLATFORM_IMX2_WDT
 164         select IMX_HAVE_PLATFORM_IMXDI_RTC
 165         select IMX_HAVE_PLATFORM_IMX_I2C
 166         select IMX_HAVE_PLATFORM_IMX_FB
 167         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 168         select IMX_HAVE_PLATFORM_IMX_UART
 169         select IMX_HAVE_PLATFORM_MXC_EHCI
 170         select IMX_HAVE_PLATFORM_MXC_NAND
 171         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 172
 173 config MACH_EUKREA_CPUIMX25SD
 174         bool "Support Eukrea CPUIMX25 Platform"
 175         select SOC_IMX25
 176         select IMX_HAVE_PLATFORM_FLEXCAN
 177         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 178         select IMX_HAVE_PLATFORM_IMXDI_RTC
 179         select IMX_HAVE_PLATFORM_IMX_FB
 180         select IMX_HAVE_PLATFORM_IMX_I2C
 181         select IMX_HAVE_PLATFORM_IMX_UART
 182         select IMX_HAVE_PLATFORM_MXC_EHCI
 183         select IMX_HAVE_PLATFORM_MXC_NAND
 184         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 185         select MXC_ULPI if USB_ULPI
 186
 187 choice
 188         prompt "Baseboard"
 189         depends on MACH_EUKREA_CPUIMX25SD
 190         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 191
 192 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 193         bool "Eukrea MBIMXSD development board"
 194         select IMX_HAVE_PLATFORM_GPIO_KEYS
 195         select IMX_HAVE_PLATFORM_IMX_SSI
 196         select LEDS_GPIO_REGISTER
 197         help
 198           This adds board specific devices that can be found on Eukrea's
 199           MBIMXSD evaluation board.
 200
 201 endchoice
 202
 203 comment "MX27 platforms:"
 204
 205 config MACH_MX27ADS
 206         bool "MX27ADS platform"
 207         select SOC_IMX27
 208         select IMX_HAVE_PLATFORM_IMX_FB
 209         select IMX_HAVE_PLATFORM_IMX_I2C
 210         select IMX_HAVE_PLATFORM_IMX_UART
 211         select IMX_HAVE_PLATFORM_MXC_MMC
 212         select IMX_HAVE_PLATFORM_MXC_NAND
 213         select IMX_HAVE_PLATFORM_MXC_W1
 214         help
 215           Include support for MX27ADS platform. This includes specific
 216           configurations for the board and its peripherals.
 217
 218 config MACH_PCM038
 219         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 220         select SOC_IMX27
 221         select IMX_HAVE_PLATFORM_IMX2_WDT
 222         select IMX_HAVE_PLATFORM_IMX_I2C
 223         select IMX_HAVE_PLATFORM_IMX_UART
 224         select IMX_HAVE_PLATFORM_MXC_EHCI
 225         select IMX_HAVE_PLATFORM_MXC_NAND
 226         select IMX_HAVE_PLATFORM_MXC_W1
 227         select IMX_HAVE_PLATFORM_SPI_IMX
 228         select MXC_ULPI if USB_ULPI
 229         help
 230           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 231           includes specific configurations for the module and its peripherals.
 232
 233 choice
 234         prompt "Baseboard"
 235         depends on MACH_PCM038
 236         default MACH_PCM970_BASEBOARD
 237
 238 config MACH_PCM970_BASEBOARD
 239         bool "PHYTEC PCM970 development board"
 240         select IMX_HAVE_PLATFORM_IMX_FB
 241         select IMX_HAVE_PLATFORM_MXC_MMC
 242         help
 243           This adds board specific devices that can be found on Phytec's
 244           PCM970 evaluation board.
 245
 246 endchoice
 247
 248 config MACH_CPUIMX27
 249         bool "Eukrea CPUIMX27 module"
 250         select SOC_IMX27
 251         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 252         select IMX_HAVE_PLATFORM_IMX2_WDT
 253         select IMX_HAVE_PLATFORM_IMX_I2C
 254         select IMX_HAVE_PLATFORM_IMX_UART
 255         select IMX_HAVE_PLATFORM_MXC_EHCI
 256         select IMX_HAVE_PLATFORM_MXC_NAND
 257         select IMX_HAVE_PLATFORM_MXC_W1
 258         select MXC_ULPI if USB_ULPI
 259         help
 260           Include support for Eukrea CPUIMX27 platform. This includes
 261           specific configurations for the module and its peripherals.
 262
 263 config MACH_EUKREA_CPUIMX27_USESDHC2
 264         bool "CPUIMX27 integrates SDHC2 module"
 265         depends on MACH_CPUIMX27
 266         select IMX_HAVE_PLATFORM_MXC_MMC
 267         help
 268           This adds support for the internal SDHC2 used on CPUIMX27
 269           for wifi or eMMC.
 270
 271 config MACH_EUKREA_CPUIMX27_USEUART4
 272         bool "CPUIMX27 integrates UART4 module"
 273         depends on MACH_CPUIMX27
 274         help
 275           This adds support for the internal UART4 used on CPUIMX27
 276           for bluetooth.
 277
 278 choice
 279         prompt "Baseboard"
 280         depends on MACH_CPUIMX27
 281         default MACH_EUKREA_MBIMX27_BASEBOARD
 282
 283 config MACH_EUKREA_MBIMX27_BASEBOARD
 284         bool "Eukrea MBIMX27 development board"
 285         select IMX_HAVE_PLATFORM_IMX_FB
 286         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 287         select IMX_HAVE_PLATFORM_IMX_SSI
 288         select IMX_HAVE_PLATFORM_IMX_UART
 289         select IMX_HAVE_PLATFORM_MXC_MMC
 290         select IMX_HAVE_PLATFORM_SPI_IMX
 291         select LEDS_GPIO_REGISTER
 292         help
 293           This adds board specific devices that can be found on Eukrea's
 294           MBIMX27 evaluation board.
 295
 296 endchoice
 297
 298 config MACH_MX27_3DS
 299         bool "MX27PDK platform"
 300         select SOC_IMX27
 301         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 302         select IMX_HAVE_PLATFORM_IMX2_WDT
 303         select IMX_HAVE_PLATFORM_IMX_FB
 304         select IMX_HAVE_PLATFORM_IMX_I2C
 305         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 306         select IMX_HAVE_PLATFORM_IMX_UART
 307         select IMX_HAVE_PLATFORM_MXC_EHCI
 308         select IMX_HAVE_PLATFORM_MXC_MMC
 309         select IMX_HAVE_PLATFORM_SPI_IMX
 310         select MXC_DEBUG_BOARD
 311         select MXC_ULPI if USB_ULPI
 312         help
 313           Include support for MX27PDK platform. This includes specific
 314           configurations for the board and its peripherals.
 315
 316 config MACH_IMX27_VISSTRIM_M10
 317         bool "Vista Silicon i.MX27 Visstrim_m10"
 318         select SOC_IMX27
 319         select IMX_HAVE_PLATFORM_GPIO_KEYS
 320         select IMX_HAVE_PLATFORM_IMX_I2C
 321         select IMX_HAVE_PLATFORM_IMX_SSI
 322         select IMX_HAVE_PLATFORM_IMX_UART
 323         select IMX_HAVE_PLATFORM_MXC_MMC
 324         select IMX_HAVE_PLATFORM_MXC_EHCI
 325         help
 326           Include support for Visstrim_m10 platform and its different variants.
 327           This includes specific configurations for the board and its
 328           peripherals.
 329
 330 config MACH_IMX27LITE
 331         bool "LogicPD MX27 LITEKIT platform"
 332         select SOC_IMX27
 333         select IMX_HAVE_PLATFORM_IMX_UART
 334         select IMX_HAVE_PLATFORM_IMX_SSI
 335         help
 336           Include support for MX27 LITEKIT platform. This includes specific
 337           configurations for the board and its peripherals.
 338
 339 config MACH_PCA100
 340         bool "Phytec phyCARD-s (pca100)"
 341         select SOC_IMX27
 342         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 343         select IMX_HAVE_PLATFORM_IMX2_WDT
 344         select IMX_HAVE_PLATFORM_IMX_FB
 345         select IMX_HAVE_PLATFORM_IMX_I2C
 346         select IMX_HAVE_PLATFORM_IMX_SSI
 347         select IMX_HAVE_PLATFORM_IMX_UART
 348         select IMX_HAVE_PLATFORM_MXC_EHCI
 349         select IMX_HAVE_PLATFORM_MXC_MMC
 350         select IMX_HAVE_PLATFORM_MXC_NAND
 351         select IMX_HAVE_PLATFORM_MXC_W1
 352         select IMX_HAVE_PLATFORM_SPI_IMX
 353         select MXC_ULPI if USB_ULPI
 354         help
 355           Include support for phyCARD-s (aka pca100) platform. This
 356           includes specific configurations for the module and its peripherals.
 357
 358 config MACH_MXT_TD60
 359         bool "Maxtrack i-MXT TD60"
 360         select SOC_IMX27
 361         select IMX_HAVE_PLATFORM_IMX_FB
 362         select IMX_HAVE_PLATFORM_IMX_I2C
 363         select IMX_HAVE_PLATFORM_IMX_UART
 364         select IMX_HAVE_PLATFORM_MXC_MMC
 365         select IMX_HAVE_PLATFORM_MXC_NAND
 366         help
 367           Include support for i-MXT (aka td60) platform. This
 368           includes specific configurations for the module and its peripherals.
 369
 370 config MACH_IMX27IPCAM
 371         bool "IMX27 IPCAM platform"
 372         select SOC_IMX27
 373         select IMX_HAVE_PLATFORM_IMX2_WDT
 374         select IMX_HAVE_PLATFORM_IMX_UART
 375         help
 376           Include support for IMX27 IPCAM platform. This includes specific
 377           configurations for the board and its peripherals.
 378
 379 endif
 380
 381 if ARCH_IMX_V6_V7
 382
 383 comment "MX31 platforms:"
 384
 385 config MACH_MX31ADS
 386         bool "Support MX31ADS platforms"
 387         select SOC_IMX31
 388         select IMX_HAVE_PLATFORM_IMX_I2C
 389         select IMX_HAVE_PLATFORM_IMX_SSI
 390         select IMX_HAVE_PLATFORM_IMX_UART
 391         default y
 392         help
 393           Include support for MX31ADS platform. This includes specific
 394           configurations for the board and its peripherals.
 395
 396 config MACH_MX31ADS_WM1133_EV1
 397         bool "Support Wolfson Microelectronics 1133-EV1 module"
 398         depends on MACH_MX31ADS
 399         depends on MFD_WM8350_I2C
 400         depends on REGULATOR_WM8350
 401         select MFD_WM8350_CONFIG_MODE_0
 402         select MFD_WM8352_CONFIG_MODE_0
 403         help
 404           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 405           and audio module for the MX31ADS platform.
 406
 407 config MACH_MX31LILLY
 408         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 409         select SOC_IMX31
 410         select IMX_HAVE_PLATFORM_IMX_UART
 411         select IMX_HAVE_PLATFORM_IPU_CORE
 412         select IMX_HAVE_PLATFORM_MXC_EHCI
 413         select IMX_HAVE_PLATFORM_MXC_MMC
 414         select IMX_HAVE_PLATFORM_SPI_IMX
 415         select MXC_ULPI if USB_ULPI
 416         help
 417           Include support for mx31 based LILLY1131 modules. This includes
 418           specific configurations for the board and its peripherals.
 419
 420 config MACH_MX31LITE
 421         bool "Support MX31 LITEKIT (LogicPD)"
 422         select SOC_IMX31
 423         select MXC_ULPI if USB_ULPI
 424         select IMX_HAVE_PLATFORM_IMX2_WDT
 425         select IMX_HAVE_PLATFORM_IMX_UART
 426         select IMX_HAVE_PLATFORM_MXC_EHCI
 427         select IMX_HAVE_PLATFORM_MXC_MMC
 428         select IMX_HAVE_PLATFORM_MXC_NAND
 429         select IMX_HAVE_PLATFORM_MXC_RTC
 430         select IMX_HAVE_PLATFORM_SPI_IMX
 431         select LEDS_GPIO_REGISTER
 432         help
 433           Include support for MX31 LITEKIT platform. This includes specific
 434           configurations for the board and its peripherals.
 435
 436 config MACH_PCM037
 437         bool "Support Phytec pcm037 (i.MX31) platforms"
 438         select SOC_IMX31
 439         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 440         select IMX_HAVE_PLATFORM_IMX2_WDT
 441         select IMX_HAVE_PLATFORM_IMX_I2C
 442         select IMX_HAVE_PLATFORM_IMX_UART
 443         select IMX_HAVE_PLATFORM_IPU_CORE
 444         select IMX_HAVE_PLATFORM_MXC_EHCI
 445         select IMX_HAVE_PLATFORM_MXC_MMC
 446         select IMX_HAVE_PLATFORM_MXC_NAND
 447         select IMX_HAVE_PLATFORM_MXC_W1
 448         select MXC_ULPI if USB_ULPI
 449         help
 450           Include support for Phytec pcm037 platform. This includes
 451           specific configurations for the board and its peripherals.
 452
 453 config MACH_PCM037_EET
 454         bool "Support pcm037 EET board extensions"
 455         depends on MACH_PCM037
 456         select IMX_HAVE_PLATFORM_GPIO_KEYS
 457         select IMX_HAVE_PLATFORM_SPI_IMX
 458         help
 459           Add support for PCM037 EET baseboard extensions. If you are using the
 460           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 461           command-line parameter.
 462
 463 config MACH_MX31_3DS
 464         bool "Support MX31PDK (3DS)"
 465         select SOC_IMX31
 466         select MXC_DEBUG_BOARD
 467         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 468         select IMX_HAVE_PLATFORM_IMX2_WDT
 469         select IMX_HAVE_PLATFORM_IMX_I2C
 470         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 471         select IMX_HAVE_PLATFORM_IMX_UART
 472         select IMX_HAVE_PLATFORM_IPU_CORE
 473         select IMX_HAVE_PLATFORM_MXC_EHCI
 474         select IMX_HAVE_PLATFORM_MXC_MMC
 475         select IMX_HAVE_PLATFORM_MXC_NAND
 476         select IMX_HAVE_PLATFORM_SPI_IMX
 477         select MXC_ULPI if USB_ULPI
 478         help
 479           Include support for MX31PDK (3DS) platform. This includes specific
 480           configurations for the board and its peripherals.
 481
 482 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 483         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 484         depends on MACH_MX31_3DS
 485         depends on MTD_NAND_MXC
 486         help
 487           Enable this if you want that the MXC NAND driver uses the in flash
 488           Bad Block Table to know what blocks are bad instead of scanning the
 489           entire flash looking for bad block markers.
 490
 491 config MACH_MX31MOBOARD
 492         bool "Support mx31moboard platforms (EPFL Mobots group)"
 493         select SOC_IMX31
 494         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 495         select IMX_HAVE_PLATFORM_IMX_I2C
 496         select IMX_HAVE_PLATFORM_IMX_UART
 497         select IMX_HAVE_PLATFORM_IPU_CORE
 498         select IMX_HAVE_PLATFORM_MXC_EHCI
 499         select IMX_HAVE_PLATFORM_MXC_MMC
 500         select IMX_HAVE_PLATFORM_SPI_IMX
 501         select LEDS_GPIO_REGISTER
 502         select MXC_ULPI if USB_ULPI
 503         help
 504           Include support for mx31moboard platform. This includes specific
 505           configurations for the board and its peripherals.
 506
 507 config MACH_QONG
 508         bool "Support Dave/DENX QongEVB-LITE platform"
 509         select SOC_IMX31
 510         select IMX_HAVE_PLATFORM_IMX_UART
 511         select IMX_HAVE_PLATFORM_IMX2_WDT
 512         help
 513           Include support for Dave/DENX QongEVB-LITE platform. This includes
 514           specific configurations for the board and its peripherals.
 515
 516 config MACH_ARMADILLO5X0
 517         bool "Support Atmark Armadillo-500 Development Base Board"
 518         select SOC_IMX31
 519         select IMX_HAVE_PLATFORM_GPIO_KEYS
 520         select IMX_HAVE_PLATFORM_IMX_I2C
 521         select IMX_HAVE_PLATFORM_IMX_UART
 522         select IMX_HAVE_PLATFORM_IPU_CORE
 523         select IMX_HAVE_PLATFORM_MXC_EHCI
 524         select IMX_HAVE_PLATFORM_MXC_MMC
 525         select IMX_HAVE_PLATFORM_MXC_NAND
 526         select MXC_ULPI if USB_ULPI
 527         help
 528           Include support for Atmark Armadillo-500 platform. This includes
 529           specific configurations for the board and its peripherals.
 530
 531 config MACH_KZM_ARM11_01
 532         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 533         select SOC_IMX31
 534         select IMX_HAVE_PLATFORM_IMX_UART
 535         help
 536           Include support for KZM-ARM11-01. This includes specific
 537           configurations for the board and its peripherals.
 538
 539 config MACH_BUG
 540         bool "Support Buglabs BUGBase platform"
 541         select SOC_IMX31
 542         select IMX_HAVE_PLATFORM_IMX_UART
 543         default y
 544         help
 545           Include support for BUGBase 1.3 platform. This includes specific
 546           configurations for the board and its peripherals.
 547
 548 comment "MX35 platforms:"
 549
 550 config MACH_PCM043
 551         bool "Support Phytec pcm043 (i.MX35) platforms"
 552         select SOC_IMX35
 553         select IMX_HAVE_PLATFORM_FLEXCAN
 554         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 555         select IMX_HAVE_PLATFORM_IMX2_WDT
 556         select IMX_HAVE_PLATFORM_IMX_I2C
 557         select IMX_HAVE_PLATFORM_IMX_SSI
 558         select IMX_HAVE_PLATFORM_IMX_UART
 559         select IMX_HAVE_PLATFORM_IPU_CORE
 560         select IMX_HAVE_PLATFORM_MXC_EHCI
 561         select IMX_HAVE_PLATFORM_MXC_NAND
 562         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 563         select MXC_ULPI if USB_ULPI
 564         help
 565           Include support for Phytec pcm043 platform. This includes
 566           specific configurations for the board and its peripherals.
 567
 568 config MACH_MX35_3DS
 569         bool "Support MX35PDK platform"
 570         select SOC_IMX35
 571         select MXC_DEBUG_BOARD
 572         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 573         select IMX_HAVE_PLATFORM_IMX2_WDT
 574         select IMX_HAVE_PLATFORM_IMX_I2C
 575         select IMX_HAVE_PLATFORM_IMX_UART
 576         select IMX_HAVE_PLATFORM_MXC_EHCI
 577         select IMX_HAVE_PLATFORM_MXC_NAND
 578         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 579         help
 580           Include support for MX35PDK platform. This includes specific
 581           configurations for the board and its peripherals.
 582
 583 config MACH_EUKREA_CPUIMX35SD
 584         bool "Support Eukrea CPUIMX35 Platform"
 585         select SOC_IMX35
 586         select IMX_HAVE_PLATFORM_FLEXCAN
 587         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 588         select IMX_HAVE_PLATFORM_IMX2_WDT
 589         select IMX_HAVE_PLATFORM_IMX_I2C
 590         select IMX_HAVE_PLATFORM_IMX_UART
 591         select IMX_HAVE_PLATFORM_MXC_EHCI
 592         select IMX_HAVE_PLATFORM_MXC_NAND
 593         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 594         select MXC_ULPI if USB_ULPI
 595         help
 596           Include support for Eukrea CPUIMX35 platform. This includes
 597           specific configurations for the board and its peripherals.
 598
 599 choice
 600         prompt "Baseboard"
 601         depends on MACH_EUKREA_CPUIMX35SD
 602         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 603
 604 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 605         bool "Eukrea MBIMXSD development board"
 606         select IMX_HAVE_PLATFORM_GPIO_KEYS
 607         select IMX_HAVE_PLATFORM_IMX_SSI
 608         select IMX_HAVE_PLATFORM_IPU_CORE
 609         select LEDS_GPIO_REGISTER
 610         help
 611           This adds board specific devices that can be found on Eukrea's
 612           MBIMXSD evaluation board.
 613
 614 endchoice
 615
 616 config MACH_VPR200
 617         bool "Support VPR200 platform"
 618         select SOC_IMX35
 619         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 620         select IMX_HAVE_PLATFORM_GPIO_KEYS
 621         select IMX_HAVE_PLATFORM_IMX2_WDT
 622         select IMX_HAVE_PLATFORM_IMX_UART
 623         select IMX_HAVE_PLATFORM_IMX_I2C
 624         select IMX_HAVE_PLATFORM_IPU_CORE
 625         select IMX_HAVE_PLATFORM_MXC_EHCI
 626         select IMX_HAVE_PLATFORM_MXC_NAND
 627         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 628         help
 629           Include support for VPR200 platform. This includes specific
 630           configurations for the board and its peripherals.
 631
 632 comment "i.MX5 platforms:"
 633
 634 config MACH_MX50_RDP
 635         bool "Support MX50 reference design platform"
 636         depends on BROKEN
 637         select SOC_IMX50
 638         select IMX_HAVE_PLATFORM_IMX_I2C
 639         select IMX_HAVE_PLATFORM_IMX_UART
 640         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 641         select IMX_HAVE_PLATFORM_SPI_IMX
 642         help
 643           Include support for MX50 reference design platform (RDP) board. This
 644           includes specific configurations for the board and its peripherals.
 645
 646 comment "i.MX51 machines:"
 647
 648 config MACH_IMX51_DT
 649         bool "Support i.MX51 platforms from device tree"
 650         select SOC_IMX51
 651         select USE_OF
 652         select MACH_MX51_BABBAGE
 653         help
 654           Include support for Freescale i.MX51 based platforms
 655           using the device tree for discovery
 656
 657 config MACH_MX51_BABBAGE
 658         bool "Support MX51 BABBAGE platforms"
 659         select SOC_IMX51
 660         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 661         select IMX_HAVE_PLATFORM_IMX2_WDT
 662         select IMX_HAVE_PLATFORM_IMX_I2C
 663         select IMX_HAVE_PLATFORM_IMX_UART
 664         select IMX_HAVE_PLATFORM_MXC_EHCI
 665         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 666         select IMX_HAVE_PLATFORM_SPI_IMX
 667         help
 668           Include support for MX51 Babbage platform, also known as MX51EVK in
 669           u-boot. This includes specific configurations for the board and its
 670           peripherals.
 671
 672 config MACH_MX51_3DS
 673         bool "Support MX51PDK (3DS)"
 674         select SOC_IMX51
 675         select IMX_HAVE_PLATFORM_IMX2_WDT
 676         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 677         select IMX_HAVE_PLATFORM_IMX_UART
 678         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 679         select IMX_HAVE_PLATFORM_SPI_IMX
 680         select MXC_DEBUG_BOARD
 681         help
 682           Include support for MX51PDK (3DS) platform. This includes specific
 683           configurations for the board and its peripherals.
 684
 685 config MACH_EUKREA_CPUIMX51
 686         bool "Support Eukrea CPUIMX51 module"
 687         select SOC_IMX51
 688         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 689         select IMX_HAVE_PLATFORM_IMX_I2C
 690         select IMX_HAVE_PLATFORM_IMX_UART
 691         select IMX_HAVE_PLATFORM_MXC_EHCI
 692         select IMX_HAVE_PLATFORM_MXC_NAND
 693         select IMX_HAVE_PLATFORM_SPI_IMX
 694         help
 695           Include support for Eukrea CPUIMX51 platform. This includes
 696           specific configurations for the module and its peripherals.
 697
 698 choice
 699         prompt "Baseboard"
 700         depends on MACH_EUKREA_CPUIMX51
 701         default MACH_EUKREA_MBIMX51_BASEBOARD
 702
 703 config MACH_EUKREA_MBIMX51_BASEBOARD
 704         prompt "Eukrea MBIMX51 development board"
 705         bool
 706         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 707         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 708         select LEDS_GPIO_REGISTER
 709         help
 710           This adds board specific devices that can be found on Eukrea's
 711           MBIMX51 evaluation board.
 712
 713 endchoice
 714
 715 config MACH_EUKREA_CPUIMX51SD
 716         bool "Support Eukrea CPUIMX51SD module"
 717         select SOC_IMX51
 718         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 719         select IMX_HAVE_PLATFORM_IMX_I2C
 720         select IMX_HAVE_PLATFORM_IMX_UART
 721         select IMX_HAVE_PLATFORM_MXC_EHCI
 722         select IMX_HAVE_PLATFORM_MXC_NAND
 723         select IMX_HAVE_PLATFORM_SPI_IMX
 724         help
 725           Include support for Eukrea CPUIMX51SD platform. This includes
 726           specific configurations for the module and its peripherals.
 727
 728 choice
 729         prompt "Baseboard"
 730         depends on MACH_EUKREA_CPUIMX51SD
 731         default MACH_EUKREA_MBIMXSD51_BASEBOARD
 732
 733 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 734         prompt "Eukrea MBIMXSD development board"
 735         bool
 736         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 737         select LEDS_GPIO_REGISTER
 738         help
 739           This adds board specific devices that can be found on Eukrea's
 740           MBIMXSD evaluation board.
 741
 742 endchoice
 743
 744 config MX51_EFIKA_COMMON
 745         bool
 746         select SOC_IMX51
 747         select IMX_HAVE_PLATFORM_IMX_UART
 748         select IMX_HAVE_PLATFORM_MXC_EHCI
 749         select IMX_HAVE_PLATFORM_PATA_IMX
 750         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 751         select IMX_HAVE_PLATFORM_SPI_IMX
 752         select MXC_ULPI if USB_ULPI
 753
 754 config MACH_MX51_EFIKAMX
 755         bool "Support MX51 Genesi Efika MX nettop"
 756         select LEDS_GPIO_REGISTER
 757         select MX51_EFIKA_COMMON
 758         help
 759           Include support for Genesi Efika MX nettop. This includes specific
 760           configurations for the board and its peripherals.
 761
 762 config MACH_MX51_EFIKASB
 763         bool "Support MX51 Genesi Efika Smartbook"
 764         select LEDS_GPIO_REGISTER
 765         select MX51_EFIKA_COMMON
 766         help
 767           Include support for Genesi Efika Smartbook. This includes specific
 768           configurations for the board and its peripherals.
 769
 770 comment "i.MX53 machines:"
 771
 772 config MACH_IMX53_DT
 773         bool "Support i.MX53 platforms from device tree"
 774         select SOC_IMX53
 775         select USE_OF
 776         select MACH_MX53_ARD
 777         select MACH_MX53_EVK
 778         select MACH_MX53_LOCO
 779         select MACH_MX53_SMD
 780         help
 781           Include support for Freescale i.MX53 based platforms
 782           using the device tree for discovery
 783
 784 config MACH_MX53_EVK
 785         bool "Support MX53 EVK platforms"
 786         select SOC_IMX53
 787         select IMX_HAVE_PLATFORM_IMX2_WDT
 788         select IMX_HAVE_PLATFORM_IMX_UART
 789         select IMX_HAVE_PLATFORM_IMX_I2C
 790         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 791         select IMX_HAVE_PLATFORM_SPI_IMX
 792         select LEDS_GPIO_REGISTER
 793         help
 794           Include support for MX53 EVK platform. This includes specific
 795           configurations for the board and its peripherals.
 796
 797 config MACH_MX53_SMD
 798         bool "Support MX53 SMD platforms"
 799         select SOC_IMX53
 800         select IMX_HAVE_PLATFORM_IMX2_WDT
 801         select IMX_HAVE_PLATFORM_IMX_I2C
 802         select IMX_HAVE_PLATFORM_IMX_UART
 803         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 804         help
 805           Include support for MX53 SMD platform. This includes specific
 806           configurations for the board and its peripherals.
 807
 808 config MACH_MX53_LOCO
 809         bool "Support MX53 LOCO platforms"
 810         select SOC_IMX53
 811         select IMX_HAVE_PLATFORM_IMX2_WDT
 812         select IMX_HAVE_PLATFORM_IMX_I2C
 813         select IMX_HAVE_PLATFORM_IMX_UART
 814         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 815         select IMX_HAVE_PLATFORM_GPIO_KEYS
 816         select LEDS_GPIO_REGISTER
 817         help
 818           Include support for MX53 LOCO platform. This includes specific
 819           configurations for the board and its peripherals.
 820
 821 config MACH_MX53_ARD
 822         bool "Support MX53 ARD platforms"
 823         select SOC_IMX53
 824         select IMX_HAVE_PLATFORM_IMX2_WDT
 825         select IMX_HAVE_PLATFORM_IMX_I2C
 826         select IMX_HAVE_PLATFORM_IMX_UART
 827         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 828         select IMX_HAVE_PLATFORM_GPIO_KEYS
 829         help
 830           Include support for MX53 ARD platform. This includes specific
 831           configurations for the board and its peripherals.
 832
 833 comment "i.MX6 family:"
 834
 835 config SOC_IMX6Q
 836         bool "i.MX6 Quad support"
 837         select ARM_CPU_SUSPEND if PM
 838         select ARM_GIC
 839         select CPU_V7
 840         select HAVE_ARM_SCU
 841         select HAVE_IMX_GPC
 842         select HAVE_IMX_MMDC
 843         select HAVE_IMX_SRC
 844         select HAVE_SMP
 845         select USE_OF
 846
 847         help
 848           This enables support for Freescale i.MX6 Quad processor.
 849
 850 endif