arch/arm/mach-imx/Kconfig

   1 config IMX_HAVE_DMA_V1
   2         bool
   3
   4 config HAVE_IMX_GPC
   5         bool
   6
   7 config HAVE_IMX_MMDC
   8         bool
   9
  10 config HAVE_IMX_SRC
  11         bool
  12
  13 config ARCH_MX1
  14         bool
  15
  16 config MACH_MX21
  17         bool
  18
  19 config ARCH_MX25
  20         bool
  21
  22 config MACH_MX27
  23         bool
  24
  25 config SOC_IMX1
  26         bool
  27         select ARCH_MX1
  28         select CPU_ARM920T
  29         select IMX_HAVE_DMA_V1
  30         select IMX_HAVE_IOMUX_V1
  31         select MXC_AVIC
  32
  33 config SOC_IMX21
  34         bool
  35         select MACH_MX21
  36         select CPU_ARM926T
  37         select ARCH_MXC_AUDMUX_V1
  38         select IMX_HAVE_DMA_V1
  39         select IMX_HAVE_IOMUX_V1
  40         select MXC_AVIC
  41
  42 config SOC_IMX25
  43         bool
  44         select ARCH_MX25
  45         select CPU_ARM926T
  46         select ARCH_MXC_AUDMUX_V2
  47         select ARCH_MXC_IOMUX_V3
  48         select MXC_AVIC
  49
  50 config SOC_IMX27
  51         bool
  52         select MACH_MX27
  53         select CPU_ARM926T
  54         select ARCH_MXC_AUDMUX_V1
  55         select IMX_HAVE_DMA_V1
  56         select IMX_HAVE_IOMUX_V1
  57         select MXC_AVIC
  58
  59 config SOC_IMX31
  60         bool
  61         select CPU_V6
  62         select IMX_HAVE_PLATFORM_MXC_RNGA
  63         select ARCH_MXC_AUDMUX_V2
  64         select MXC_AVIC
  65         select SMP_ON_UP if SMP
  66
  67 config SOC_IMX35
  68         bool
  69         select CPU_V6
  70         select ARCH_MXC_IOMUX_V3
  71         select ARCH_MXC_AUDMUX_V2
  72         select HAVE_EPIT
  73         select MXC_AVIC
  74         select SMP_ON_UP if SMP
  75
  76
  77 if ARCH_IMX_V4_V5
  78
  79 comment "MX1 platforms:"
  80 config MACH_MXLADS
  81         bool
  82
  83 config ARCH_MX1ADS
  84         bool "MX1ADS platform"
  85         select MACH_MXLADS
  86         select SOC_IMX1
  87         select IMX_HAVE_PLATFORM_IMX_I2C
  88         select IMX_HAVE_PLATFORM_IMX_UART
  89         help
  90           Say Y here if you are using Motorola MX1ADS/MXLADS boards
  91
  92 config MACH_SCB9328
  93         bool "Synertronixx scb9328"
  94         select IMX_HAVE_PLATFORM_IMX_UART
  95         help
  96           Say Y here if you are using a Synertronixx scb9328 board
  97
  98 config MACH_APF9328
  99         bool "APF9328"
 100         select SOC_IMX1
 101         select IMX_HAVE_PLATFORM_IMX_I2C
 102         select IMX_HAVE_PLATFORM_IMX_UART
 103         help
 104           Say Yes here if you are using the Armadeus APF9328 development board
 105
 106 comment "MX21 platforms:"
 107
 108 config MACH_MX21ADS
 109         bool "MX21ADS platform"
 110         select SOC_IMX21
 111         select IMX_HAVE_PLATFORM_IMX_FB
 112         select IMX_HAVE_PLATFORM_IMX_UART
 113         select IMX_HAVE_PLATFORM_MXC_MMC
 114         select IMX_HAVE_PLATFORM_MXC_NAND
 115         help
 116           Include support for MX21ADS platform. This includes specific
 117           configurations for the board and its peripherals.
 118
 119 comment "MX25 platforms:"
 120
 121 config MACH_MX25_3DS
 122         bool "Support MX25PDK (3DS) Platform"
 123         select SOC_IMX25
 124         select IMX_HAVE_PLATFORM_FLEXCAN
 125         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 126         select IMX_HAVE_PLATFORM_IMX2_WDT
 127         select IMX_HAVE_PLATFORM_IMXDI_RTC
 128         select IMX_HAVE_PLATFORM_IMX_I2C
 129         select IMX_HAVE_PLATFORM_IMX_FB
 130         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 131         select IMX_HAVE_PLATFORM_IMX_UART
 132         select IMX_HAVE_PLATFORM_MXC_EHCI
 133         select IMX_HAVE_PLATFORM_MXC_NAND
 134         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 135
 136 config MACH_EUKREA_CPUIMX25SD
 137         bool "Support Eukrea CPUIMX25 Platform"
 138         select SOC_IMX25
 139         select IMX_HAVE_PLATFORM_FLEXCAN
 140         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 141         select IMX_HAVE_PLATFORM_IMXDI_RTC
 142         select IMX_HAVE_PLATFORM_IMX_FB
 143         select IMX_HAVE_PLATFORM_IMX_I2C
 144         select IMX_HAVE_PLATFORM_IMX_UART
 145         select IMX_HAVE_PLATFORM_MXC_EHCI
 146         select IMX_HAVE_PLATFORM_MXC_NAND
 147         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 148         select MXC_ULPI if USB_ULPI
 149
 150 choice
 151         prompt "Baseboard"
 152         depends on MACH_EUKREA_CPUIMX25SD
 153         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 154
 155 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 156         bool "Eukrea MBIMXSD development board"
 157         select IMX_HAVE_PLATFORM_GPIO_KEYS
 158         select IMX_HAVE_PLATFORM_IMX_SSI
 159         select LEDS_GPIO_REGISTER
 160         help
 161           This adds board specific devices that can be found on Eukrea's
 162           MBIMXSD evaluation board.
 163
 164 endchoice
 165
 166 comment "MX27 platforms:"
 167
 168 config MACH_MX27ADS
 169         bool "MX27ADS platform"
 170         select SOC_IMX27
 171         select IMX_HAVE_PLATFORM_IMX_FB
 172         select IMX_HAVE_PLATFORM_IMX_I2C
 173         select IMX_HAVE_PLATFORM_IMX_UART
 174         select IMX_HAVE_PLATFORM_MXC_MMC
 175         select IMX_HAVE_PLATFORM_MXC_NAND
 176         select IMX_HAVE_PLATFORM_MXC_W1
 177         help
 178           Include support for MX27ADS platform. This includes specific
 179           configurations for the board and its peripherals.
 180
 181 config MACH_PCM038
 182         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 183         select SOC_IMX27
 184         select IMX_HAVE_PLATFORM_IMX2_WDT
 185         select IMX_HAVE_PLATFORM_IMX_I2C
 186         select IMX_HAVE_PLATFORM_IMX_UART
 187         select IMX_HAVE_PLATFORM_MXC_EHCI
 188         select IMX_HAVE_PLATFORM_MXC_NAND
 189         select IMX_HAVE_PLATFORM_MXC_W1
 190         select IMX_HAVE_PLATFORM_SPI_IMX
 191         select MXC_ULPI if USB_ULPI
 192         help
 193           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 194           includes specific configurations for the module and its peripherals.
 195
 196 choice
 197         prompt "Baseboard"
 198         depends on MACH_PCM038
 199         default MACH_PCM970_BASEBOARD
 200
 201 config MACH_PCM970_BASEBOARD
 202         bool "PHYTEC PCM970 development board"
 203         select IMX_HAVE_PLATFORM_IMX_FB
 204         select IMX_HAVE_PLATFORM_MXC_MMC
 205         help
 206           This adds board specific devices that can be found on Phytec's
 207           PCM970 evaluation board.
 208
 209 endchoice
 210
 211 config MACH_CPUIMX27
 212         bool "Eukrea CPUIMX27 module"
 213         select SOC_IMX27
 214         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 215         select IMX_HAVE_PLATFORM_IMX2_WDT
 216         select IMX_HAVE_PLATFORM_IMX_I2C
 217         select IMX_HAVE_PLATFORM_IMX_UART
 218         select IMX_HAVE_PLATFORM_MXC_EHCI
 219         select IMX_HAVE_PLATFORM_MXC_NAND
 220         select IMX_HAVE_PLATFORM_MXC_W1
 221         select MXC_ULPI if USB_ULPI
 222         help
 223           Include support for Eukrea CPUIMX27 platform. This includes
 224           specific configurations for the module and its peripherals.
 225
 226 config MACH_EUKREA_CPUIMX27_USESDHC2
 227         bool "CPUIMX27 integrates SDHC2 module"
 228         depends on MACH_CPUIMX27
 229         select IMX_HAVE_PLATFORM_MXC_MMC
 230         help
 231           This adds support for the internal SDHC2 used on CPUIMX27
 232           for wifi or eMMC.
 233
 234 config MACH_EUKREA_CPUIMX27_USEUART4
 235         bool "CPUIMX27 integrates UART4 module"
 236         depends on MACH_CPUIMX27
 237         help
 238           This adds support for the internal UART4 used on CPUIMX27
 239           for bluetooth.
 240
 241 choice
 242         prompt "Baseboard"
 243         depends on MACH_CPUIMX27
 244         default MACH_EUKREA_MBIMX27_BASEBOARD
 245
 246 config MACH_EUKREA_MBIMX27_BASEBOARD
 247         bool "Eukrea MBIMX27 development board"
 248         select IMX_HAVE_PLATFORM_IMX_FB
 249         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 250         select IMX_HAVE_PLATFORM_IMX_SSI
 251         select IMX_HAVE_PLATFORM_IMX_UART
 252         select IMX_HAVE_PLATFORM_MXC_MMC
 253         select IMX_HAVE_PLATFORM_SPI_IMX
 254         select LEDS_GPIO_REGISTER
 255         help
 256           This adds board specific devices that can be found on Eukrea's
 257           MBIMX27 evaluation board.
 258
 259 endchoice
 260
 261 config MACH_MX27_3DS
 262         bool "MX27PDK platform"
 263         select SOC_IMX27
 264         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 265         select IMX_HAVE_PLATFORM_IMX2_WDT
 266         select IMX_HAVE_PLATFORM_IMX_FB
 267         select IMX_HAVE_PLATFORM_IMX_I2C
 268         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 269         select IMX_HAVE_PLATFORM_IMX_UART
 270         select IMX_HAVE_PLATFORM_MXC_EHCI
 271         select IMX_HAVE_PLATFORM_MXC_MMC
 272         select IMX_HAVE_PLATFORM_SPI_IMX
 273         select MXC_DEBUG_BOARD
 274         select MXC_ULPI if USB_ULPI
 275         help
 276           Include support for MX27PDK platform. This includes specific
 277           configurations for the board and its peripherals.
 278
 279 config MACH_IMX27_VISSTRIM_M10
 280         bool "Vista Silicon i.MX27 Visstrim_m10"
 281         select SOC_IMX27
 282         select IMX_HAVE_PLATFORM_GPIO_KEYS
 283         select IMX_HAVE_PLATFORM_IMX_I2C
 284         select IMX_HAVE_PLATFORM_IMX_SSI
 285         select IMX_HAVE_PLATFORM_IMX_UART
 286         select IMX_HAVE_PLATFORM_MXC_MMC
 287         select IMX_HAVE_PLATFORM_MXC_EHCI
 288         help
 289           Include support for Visstrim_m10 platform and its different variants.
 290           This includes specific configurations for the board and its
 291           peripherals.
 292
 293 config MACH_IMX27LITE
 294         bool "LogicPD MX27 LITEKIT platform"
 295         select SOC_IMX27
 296         select IMX_HAVE_PLATFORM_IMX_UART
 297         select IMX_HAVE_PLATFORM_IMX_SSI
 298         help
 299           Include support for MX27 LITEKIT platform. This includes specific
 300           configurations for the board and its peripherals.
 301
 302 config MACH_PCA100
 303         bool "Phytec phyCARD-s (pca100)"
 304         select SOC_IMX27
 305         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 306         select IMX_HAVE_PLATFORM_IMX2_WDT
 307         select IMX_HAVE_PLATFORM_IMX_FB
 308         select IMX_HAVE_PLATFORM_IMX_I2C
 309         select IMX_HAVE_PLATFORM_IMX_SSI
 310         select IMX_HAVE_PLATFORM_IMX_UART
 311         select IMX_HAVE_PLATFORM_MXC_EHCI
 312         select IMX_HAVE_PLATFORM_MXC_MMC
 313         select IMX_HAVE_PLATFORM_MXC_NAND
 314         select IMX_HAVE_PLATFORM_MXC_W1
 315         select IMX_HAVE_PLATFORM_SPI_IMX
 316         select MXC_ULPI if USB_ULPI
 317         help
 318           Include support for phyCARD-s (aka pca100) platform. This
 319           includes specific configurations for the module and its peripherals.
 320
 321 config MACH_MXT_TD60
 322         bool "Maxtrack i-MXT TD60"
 323         select SOC_IMX27
 324         select IMX_HAVE_PLATFORM_IMX_FB
 325         select IMX_HAVE_PLATFORM_IMX_I2C
 326         select IMX_HAVE_PLATFORM_IMX_UART
 327         select IMX_HAVE_PLATFORM_MXC_MMC
 328         select IMX_HAVE_PLATFORM_MXC_NAND
 329         help
 330           Include support for i-MXT (aka td60) platform. This
 331           includes specific configurations for the module and its peripherals.
 332
 333 config MACH_IMX27IPCAM
 334         bool "IMX27 IPCAM platform"
 335         select SOC_IMX27
 336         select IMX_HAVE_PLATFORM_IMX2_WDT
 337         select IMX_HAVE_PLATFORM_IMX_UART
 338         help
 339           Include support for IMX27 IPCAM platform. This includes specific
 340           configurations for the board and its peripherals.
 341
 342 endif
 343
 344 if ARCH_IMX_V6_V7
 345
 346 comment "MX31 platforms:"
 347
 348 config MACH_MX31ADS
 349         bool "Support MX31ADS platforms"
 350         select SOC_IMX31
 351         select IMX_HAVE_PLATFORM_IMX_I2C
 352         select IMX_HAVE_PLATFORM_IMX_SSI
 353         select IMX_HAVE_PLATFORM_IMX_UART
 354         default y
 355         help
 356           Include support for MX31ADS platform. This includes specific
 357           configurations for the board and its peripherals.
 358
 359 config MACH_MX31ADS_WM1133_EV1
 360         bool "Support Wolfson Microelectronics 1133-EV1 module"
 361         depends on MACH_MX31ADS
 362         depends on MFD_WM8350_I2C
 363         depends on REGULATOR_WM8350
 364         select MFD_WM8350_CONFIG_MODE_0
 365         select MFD_WM8352_CONFIG_MODE_0
 366         help
 367           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 368           and audio module for the MX31ADS platform.
 369
 370 config MACH_MX31LILLY
 371         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 372         select SOC_IMX31
 373         select IMX_HAVE_PLATFORM_IMX_UART
 374         select IMX_HAVE_PLATFORM_IPU_CORE
 375         select IMX_HAVE_PLATFORM_MXC_EHCI
 376         select IMX_HAVE_PLATFORM_MXC_MMC
 377         select IMX_HAVE_PLATFORM_SPI_IMX
 378         select MXC_ULPI if USB_ULPI
 379         help
 380           Include support for mx31 based LILLY1131 modules. This includes
 381           specific configurations for the board and its peripherals.
 382
 383 config MACH_MX31LITE
 384         bool "Support MX31 LITEKIT (LogicPD)"
 385         select SOC_IMX31
 386         select MXC_ULPI if USB_ULPI
 387         select IMX_HAVE_PLATFORM_IMX2_WDT
 388         select IMX_HAVE_PLATFORM_IMX_UART
 389         select IMX_HAVE_PLATFORM_MXC_EHCI
 390         select IMX_HAVE_PLATFORM_MXC_MMC
 391         select IMX_HAVE_PLATFORM_MXC_NAND
 392         select IMX_HAVE_PLATFORM_MXC_RTC
 393         select IMX_HAVE_PLATFORM_SPI_IMX
 394         select LEDS_GPIO_REGISTER
 395         help
 396           Include support for MX31 LITEKIT platform. This includes specific
 397           configurations for the board and its peripherals.
 398
 399 config MACH_PCM037
 400         bool "Support Phytec pcm037 (i.MX31) platforms"
 401         select SOC_IMX31
 402         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 403         select IMX_HAVE_PLATFORM_IMX2_WDT
 404         select IMX_HAVE_PLATFORM_IMX_I2C
 405         select IMX_HAVE_PLATFORM_IMX_UART
 406         select IMX_HAVE_PLATFORM_IPU_CORE
 407         select IMX_HAVE_PLATFORM_MXC_EHCI
 408         select IMX_HAVE_PLATFORM_MXC_MMC
 409         select IMX_HAVE_PLATFORM_MXC_NAND
 410         select IMX_HAVE_PLATFORM_MXC_W1
 411         select MXC_ULPI if USB_ULPI
 412         help
 413           Include support for Phytec pcm037 platform. This includes
 414           specific configurations for the board and its peripherals.
 415
 416 config MACH_PCM037_EET
 417         bool "Support pcm037 EET board extensions"
 418         depends on MACH_PCM037
 419         select IMX_HAVE_PLATFORM_GPIO_KEYS
 420         select IMX_HAVE_PLATFORM_SPI_IMX
 421         help
 422           Add support for PCM037 EET baseboard extensions. If you are using the
 423           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 424           command-line parameter.
 425
 426 config MACH_MX31_3DS
 427         bool "Support MX31PDK (3DS)"
 428         select SOC_IMX31
 429         select MXC_DEBUG_BOARD
 430         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 431         select IMX_HAVE_PLATFORM_IMX2_WDT
 432         select IMX_HAVE_PLATFORM_IMX_I2C
 433         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 434         select IMX_HAVE_PLATFORM_IMX_UART
 435         select IMX_HAVE_PLATFORM_IPU_CORE
 436         select IMX_HAVE_PLATFORM_MXC_EHCI
 437         select IMX_HAVE_PLATFORM_MXC_MMC
 438         select IMX_HAVE_PLATFORM_MXC_NAND
 439         select IMX_HAVE_PLATFORM_SPI_IMX
 440         select MXC_ULPI if USB_ULPI
 441         help
 442           Include support for MX31PDK (3DS) platform. This includes specific
 443           configurations for the board and its peripherals.
 444
 445 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 446         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 447         depends on MACH_MX31_3DS
 448         depends on MTD_NAND_MXC
 449         help
 450           Enable this if you want that the MXC NAND driver uses the in flash
 451           Bad Block Table to know what blocks are bad instead of scanning the
 452           entire flash looking for bad block markers.
 453
 454 config MACH_MX31MOBOARD
 455         bool "Support mx31moboard platforms (EPFL Mobots group)"
 456         select SOC_IMX31
 457         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 458         select IMX_HAVE_PLATFORM_IMX_I2C
 459         select IMX_HAVE_PLATFORM_IMX_UART
 460         select IMX_HAVE_PLATFORM_IPU_CORE
 461         select IMX_HAVE_PLATFORM_MXC_EHCI
 462         select IMX_HAVE_PLATFORM_MXC_MMC
 463         select IMX_HAVE_PLATFORM_SPI_IMX
 464         select LEDS_GPIO_REGISTER
 465         select MXC_ULPI if USB_ULPI
 466         help
 467           Include support for mx31moboard platform. This includes specific
 468           configurations for the board and its peripherals.
 469
 470 config MACH_QONG
 471         bool "Support Dave/DENX QongEVB-LITE platform"
 472         select SOC_IMX31
 473         select IMX_HAVE_PLATFORM_IMX_UART
 474         select IMX_HAVE_PLATFORM_IMX2_WDT
 475         help
 476           Include support for Dave/DENX QongEVB-LITE platform. This includes
 477           specific configurations for the board and its peripherals.
 478
 479 config MACH_ARMADILLO5X0
 480         bool "Support Atmark Armadillo-500 Development Base Board"
 481         select SOC_IMX31
 482         select IMX_HAVE_PLATFORM_GPIO_KEYS
 483         select IMX_HAVE_PLATFORM_IMX_I2C
 484         select IMX_HAVE_PLATFORM_IMX_UART
 485         select IMX_HAVE_PLATFORM_IPU_CORE
 486         select IMX_HAVE_PLATFORM_MXC_EHCI
 487         select IMX_HAVE_PLATFORM_MXC_MMC
 488         select IMX_HAVE_PLATFORM_MXC_NAND
 489         select MXC_ULPI if USB_ULPI
 490         help
 491           Include support for Atmark Armadillo-500 platform. This includes
 492           specific configurations for the board and its peripherals.
 493
 494 config MACH_KZM_ARM11_01
 495         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 496         select SOC_IMX31
 497         select IMX_HAVE_PLATFORM_IMX_UART
 498         help
 499           Include support for KZM-ARM11-01. This includes specific
 500           configurations for the board and its peripherals.
 501
 502 config MACH_BUG
 503         bool "Support Buglabs BUGBase platform"
 504         select SOC_IMX31
 505         select IMX_HAVE_PLATFORM_IMX_UART
 506         default y
 507         help
 508           Include support for BUGBase 1.3 platform. This includes specific
 509           configurations for the board and its peripherals.
 510
 511 comment "MX35 platforms:"
 512
 513 config MACH_PCM043
 514         bool "Support Phytec pcm043 (i.MX35) platforms"
 515         select SOC_IMX35
 516         select IMX_HAVE_PLATFORM_FLEXCAN
 517         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 518         select IMX_HAVE_PLATFORM_IMX2_WDT
 519         select IMX_HAVE_PLATFORM_IMX_I2C
 520         select IMX_HAVE_PLATFORM_IMX_SSI
 521         select IMX_HAVE_PLATFORM_IMX_UART
 522         select IMX_HAVE_PLATFORM_IPU_CORE
 523         select IMX_HAVE_PLATFORM_MXC_EHCI
 524         select IMX_HAVE_PLATFORM_MXC_NAND
 525         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 526         select MXC_ULPI if USB_ULPI
 527         help
 528           Include support for Phytec pcm043 platform. This includes
 529           specific configurations for the board and its peripherals.
 530
 531 config MACH_MX35_3DS
 532         bool "Support MX35PDK platform"
 533         select SOC_IMX35
 534         select MXC_DEBUG_BOARD
 535         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 536         select IMX_HAVE_PLATFORM_IMX2_WDT
 537         select IMX_HAVE_PLATFORM_IMX_I2C
 538         select IMX_HAVE_PLATFORM_IMX_UART
 539         select IMX_HAVE_PLATFORM_MXC_EHCI
 540         select IMX_HAVE_PLATFORM_MXC_NAND
 541         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 542         help
 543           Include support for MX35PDK platform. This includes specific
 544           configurations for the board and its peripherals.
 545
 546 config MACH_EUKREA_CPUIMX35SD
 547         bool "Support Eukrea CPUIMX35 Platform"
 548         select SOC_IMX35
 549         select IMX_HAVE_PLATFORM_FLEXCAN
 550         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 551         select IMX_HAVE_PLATFORM_IMX2_WDT
 552         select IMX_HAVE_PLATFORM_IMX_I2C
 553         select IMX_HAVE_PLATFORM_IMX_UART
 554         select IMX_HAVE_PLATFORM_MXC_EHCI
 555         select IMX_HAVE_PLATFORM_MXC_NAND
 556         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 557         select MXC_ULPI if USB_ULPI
 558         help
 559           Include support for Eukrea CPUIMX35 platform. This includes
 560           specific configurations for the board and its peripherals.
 561
 562 choice
 563         prompt "Baseboard"
 564         depends on MACH_EUKREA_CPUIMX35SD
 565         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 566
 567 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 568         bool "Eukrea MBIMXSD development board"
 569         select IMX_HAVE_PLATFORM_GPIO_KEYS
 570         select IMX_HAVE_PLATFORM_IMX_SSI
 571         select IMX_HAVE_PLATFORM_IPU_CORE
 572         select LEDS_GPIO_REGISTER
 573         help
 574           This adds board specific devices that can be found on Eukrea's
 575           MBIMXSD evaluation board.
 576
 577 endchoice
 578
 579 config MACH_VPR200
 580         bool "Support VPR200 platform"
 581         select SOC_IMX35
 582         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 583         select IMX_HAVE_PLATFORM_GPIO_KEYS
 584         select IMX_HAVE_PLATFORM_IMX2_WDT
 585         select IMX_HAVE_PLATFORM_IMX_UART
 586         select IMX_HAVE_PLATFORM_IMX_I2C
 587         select IMX_HAVE_PLATFORM_IPU_CORE
 588         select IMX_HAVE_PLATFORM_MXC_EHCI
 589         select IMX_HAVE_PLATFORM_MXC_NAND
 590         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 591         help
 592           Include support for VPR200 platform. This includes specific
 593           configurations for the board and its peripherals.
 594
 595 comment "i.MX6 family:"
 596
 597 config SOC_IMX6Q
 598         bool "i.MX6 Quad support"
 599         select ARM_CPU_SUSPEND if PM
 600         select ARM_GIC
 601         select CPU_V7
 602         select HAVE_ARM_SCU
 603         select HAVE_IMX_GPC
 604         select HAVE_IMX_MMDC
 605         select HAVE_IMX_SRC
 606         select HAVE_SMP
 607         select USE_OF
 608
 609         help
 610           This enables support for Freescale i.MX6 Quad processor.
 611
 612 endif