arch/arm/mach-imx/Kconfig

   1 config IMX_HAVE_DMA_V1
   2         bool
   3
   4 config HAVE_IMX_GPC
   5         bool
   6
   7 config HAVE_IMX_MMDC
   8         bool
   9
  10 config HAVE_IMX_SRC
  11         bool
  12
  13 config ARCH_MX1
  14         bool
  15
  16 config MACH_MX21
  17         bool
  18
  19 config ARCH_MX25
  20         bool
  21
  22 config MACH_MX27
  23         bool
  24
  25 config SOC_IMX1
  26         bool
  27         select ARCH_MX1
  28         select CPU_ARM920T
  29         select IMX_HAVE_DMA_V1
  30         select IMX_HAVE_IOMUX_V1
  31         select MXC_AVIC
  32
  33 config SOC_IMX21
  34         bool
  35         select MACH_MX21
  36         select CPU_ARM926T
  37         select ARCH_MXC_AUDMUX_V1
  38         select IMX_HAVE_DMA_V1
  39         select IMX_HAVE_IOMUX_V1
  40         select MXC_AVIC
  41
  42 config SOC_IMX25
  43         bool
  44         select ARCH_MX25
  45         select CPU_ARM926T
  46         select ARCH_MXC_AUDMUX_V2
  47         select ARCH_MXC_IOMUX_V3
  48         select MXC_AVIC
  49
  50 config SOC_IMX27
  51         bool
  52         select MACH_MX27
  53         select CPU_ARM926T
  54         select ARCH_MXC_AUDMUX_V1
  55         select IMX_HAVE_DMA_V1
  56         select IMX_HAVE_IOMUX_V1
  57         select MXC_AVIC
  58
  59 config SOC_IMX31
  60         bool
  61         select CPU_V6
  62         select IMX_HAVE_PLATFORM_MXC_RNGA
  63         select ARCH_MXC_AUDMUX_V2
  64         select MXC_AVIC
  65         select SMP_ON_UP if SMP
  66
  67 config SOC_IMX35
  68         bool
  69         select CPU_V6
  70         select ARCH_MXC_IOMUX_V3
  71         select ARCH_MXC_AUDMUX_V2
  72         select HAVE_EPIT
  73         select MXC_AVIC
  74         select SMP_ON_UP if SMP
  75
  76
  77 if ARCH_IMX_V4_V5
  78
  79 comment "MX1 platforms:"
  80 config MACH_MXLADS
  81         bool
  82
  83 config ARCH_MX1ADS
  84         bool "MX1ADS platform"
  85         select MACH_MXLADS
  86         select SOC_IMX1
  87         select IMX_HAVE_PLATFORM_IMX_I2C
  88         select IMX_HAVE_PLATFORM_IMX_UART
  89         help
  90           Say Y here if you are using Motorola MX1ADS/MXLADS boards
  91
  92 config MACH_SCB9328
  93         bool "Synertronixx scb9328"
  94         select IMX_HAVE_PLATFORM_IMX_UART
  95         help
  96           Say Y here if you are using a Synertronixx scb9328 board
  97
  98 config MACH_APF9328
  99         bool "APF9328"
 100         select SOC_IMX1
 101         select IMX_HAVE_PLATFORM_IMX_UART
 102         help
 103           Say Yes here if you are using the Armadeus APF9328 development board
 104
 105 comment "MX21 platforms:"
 106
 107 config MACH_MX21ADS
 108         bool "MX21ADS platform"
 109         select SOC_IMX21
 110         select IMX_HAVE_PLATFORM_IMX_FB
 111         select IMX_HAVE_PLATFORM_IMX_UART
 112         select IMX_HAVE_PLATFORM_MXC_MMC
 113         select IMX_HAVE_PLATFORM_MXC_NAND
 114         help
 115           Include support for MX21ADS platform. This includes specific
 116           configurations for the board and its peripherals.
 117
 118 comment "MX25 platforms:"
 119
 120 config MACH_MX25_3DS
 121         bool "Support MX25PDK (3DS) Platform"
 122         select SOC_IMX25
 123         select IMX_HAVE_PLATFORM_FLEXCAN
 124         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 125         select IMX_HAVE_PLATFORM_IMX2_WDT
 126         select IMX_HAVE_PLATFORM_IMXDI_RTC
 127         select IMX_HAVE_PLATFORM_IMX_I2C
 128         select IMX_HAVE_PLATFORM_IMX_FB
 129         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 130         select IMX_HAVE_PLATFORM_IMX_UART
 131         select IMX_HAVE_PLATFORM_MXC_EHCI
 132         select IMX_HAVE_PLATFORM_MXC_NAND
 133         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 134
 135 config MACH_EUKREA_CPUIMX25SD
 136         bool "Support Eukrea CPUIMX25 Platform"
 137         select SOC_IMX25
 138         select IMX_HAVE_PLATFORM_FLEXCAN
 139         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 140         select IMX_HAVE_PLATFORM_IMXDI_RTC
 141         select IMX_HAVE_PLATFORM_IMX_FB
 142         select IMX_HAVE_PLATFORM_IMX_I2C
 143         select IMX_HAVE_PLATFORM_IMX_UART
 144         select IMX_HAVE_PLATFORM_MXC_EHCI
 145         select IMX_HAVE_PLATFORM_MXC_NAND
 146         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 147         select MXC_ULPI if USB_ULPI
 148
 149 choice
 150         prompt "Baseboard"
 151         depends on MACH_EUKREA_CPUIMX25SD
 152         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 153
 154 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 155         bool "Eukrea MBIMXSD development board"
 156         select IMX_HAVE_PLATFORM_GPIO_KEYS
 157         select IMX_HAVE_PLATFORM_IMX_SSI
 158         select LEDS_GPIO_REGISTER
 159         help
 160           This adds board specific devices that can be found on Eukrea's
 161           MBIMXSD evaluation board.
 162
 163 endchoice
 164
 165 comment "MX27 platforms:"
 166
 167 config MACH_MX27ADS
 168         bool "MX27ADS platform"
 169         select SOC_IMX27
 170         select IMX_HAVE_PLATFORM_IMX_FB
 171         select IMX_HAVE_PLATFORM_IMX_I2C
 172         select IMX_HAVE_PLATFORM_IMX_UART
 173         select IMX_HAVE_PLATFORM_MXC_MMC
 174         select IMX_HAVE_PLATFORM_MXC_NAND
 175         select IMX_HAVE_PLATFORM_MXC_W1
 176         help
 177           Include support for MX27ADS platform. This includes specific
 178           configurations for the board and its peripherals.
 179
 180 config MACH_PCM038
 181         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 182         select SOC_IMX27
 183         select IMX_HAVE_PLATFORM_IMX2_WDT
 184         select IMX_HAVE_PLATFORM_IMX_I2C
 185         select IMX_HAVE_PLATFORM_IMX_UART
 186         select IMX_HAVE_PLATFORM_MXC_EHCI
 187         select IMX_HAVE_PLATFORM_MXC_NAND
 188         select IMX_HAVE_PLATFORM_MXC_W1
 189         select IMX_HAVE_PLATFORM_SPI_IMX
 190         select MXC_ULPI if USB_ULPI
 191         help
 192           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 193           includes specific configurations for the module and its peripherals.
 194
 195 choice
 196         prompt "Baseboard"
 197         depends on MACH_PCM038
 198         default MACH_PCM970_BASEBOARD
 199
 200 config MACH_PCM970_BASEBOARD
 201         bool "PHYTEC PCM970 development board"
 202         select IMX_HAVE_PLATFORM_IMX_FB
 203         select IMX_HAVE_PLATFORM_MXC_MMC
 204         help
 205           This adds board specific devices that can be found on Phytec's
 206           PCM970 evaluation board.
 207
 208 endchoice
 209
 210 config MACH_CPUIMX27
 211         bool "Eukrea CPUIMX27 module"
 212         select SOC_IMX27
 213         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 214         select IMX_HAVE_PLATFORM_IMX2_WDT
 215         select IMX_HAVE_PLATFORM_IMX_I2C
 216         select IMX_HAVE_PLATFORM_IMX_UART
 217         select IMX_HAVE_PLATFORM_MXC_EHCI
 218         select IMX_HAVE_PLATFORM_MXC_NAND
 219         select IMX_HAVE_PLATFORM_MXC_W1
 220         select MXC_ULPI if USB_ULPI
 221         help
 222           Include support for Eukrea CPUIMX27 platform. This includes
 223           specific configurations for the module and its peripherals.
 224
 225 config MACH_EUKREA_CPUIMX27_USESDHC2
 226         bool "CPUIMX27 integrates SDHC2 module"
 227         depends on MACH_CPUIMX27
 228         select IMX_HAVE_PLATFORM_MXC_MMC
 229         help
 230           This adds support for the internal SDHC2 used on CPUIMX27
 231           for wifi or eMMC.
 232
 233 config MACH_EUKREA_CPUIMX27_USEUART4
 234         bool "CPUIMX27 integrates UART4 module"
 235         depends on MACH_CPUIMX27
 236         help
 237           This adds support for the internal UART4 used on CPUIMX27
 238           for bluetooth.
 239
 240 choice
 241         prompt "Baseboard"
 242         depends on MACH_CPUIMX27
 243         default MACH_EUKREA_MBIMX27_BASEBOARD
 244
 245 config MACH_EUKREA_MBIMX27_BASEBOARD
 246         bool "Eukrea MBIMX27 development board"
 247         select IMX_HAVE_PLATFORM_IMX_FB
 248         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 249         select IMX_HAVE_PLATFORM_IMX_SSI
 250         select IMX_HAVE_PLATFORM_IMX_UART
 251         select IMX_HAVE_PLATFORM_MXC_MMC
 252         select IMX_HAVE_PLATFORM_SPI_IMX
 253         select LEDS_GPIO_REGISTER
 254         help
 255           This adds board specific devices that can be found on Eukrea's
 256           MBIMX27 evaluation board.
 257
 258 endchoice
 259
 260 config MACH_MX27_3DS
 261         bool "MX27PDK platform"
 262         select SOC_IMX27
 263         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 264         select IMX_HAVE_PLATFORM_IMX2_WDT
 265         select IMX_HAVE_PLATFORM_IMX_FB
 266         select IMX_HAVE_PLATFORM_IMX_I2C
 267         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 268         select IMX_HAVE_PLATFORM_IMX_UART
 269         select IMX_HAVE_PLATFORM_MXC_EHCI
 270         select IMX_HAVE_PLATFORM_MXC_MMC
 271         select IMX_HAVE_PLATFORM_SPI_IMX
 272         select MXC_DEBUG_BOARD
 273         select MXC_ULPI if USB_ULPI
 274         help
 275           Include support for MX27PDK platform. This includes specific
 276           configurations for the board and its peripherals.
 277
 278 config MACH_IMX27_VISSTRIM_M10
 279         bool "Vista Silicon i.MX27 Visstrim_m10"
 280         select SOC_IMX27
 281         select IMX_HAVE_PLATFORM_GPIO_KEYS
 282         select IMX_HAVE_PLATFORM_IMX_I2C
 283         select IMX_HAVE_PLATFORM_IMX_SSI
 284         select IMX_HAVE_PLATFORM_IMX_UART
 285         select IMX_HAVE_PLATFORM_MXC_MMC
 286         select IMX_HAVE_PLATFORM_MXC_EHCI
 287         help
 288           Include support for Visstrim_m10 platform and its different variants.
 289           This includes specific configurations for the board and its
 290           peripherals.
 291
 292 config MACH_IMX27LITE
 293         bool "LogicPD MX27 LITEKIT platform"
 294         select SOC_IMX27
 295         select IMX_HAVE_PLATFORM_IMX_UART
 296         select IMX_HAVE_PLATFORM_IMX_SSI
 297         help
 298           Include support for MX27 LITEKIT platform. This includes specific
 299           configurations for the board and its peripherals.
 300
 301 config MACH_PCA100
 302         bool "Phytec phyCARD-s (pca100)"
 303         select SOC_IMX27
 304         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 305         select IMX_HAVE_PLATFORM_IMX2_WDT
 306         select IMX_HAVE_PLATFORM_IMX_FB
 307         select IMX_HAVE_PLATFORM_IMX_I2C
 308         select IMX_HAVE_PLATFORM_IMX_SSI
 309         select IMX_HAVE_PLATFORM_IMX_UART
 310         select IMX_HAVE_PLATFORM_MXC_EHCI
 311         select IMX_HAVE_PLATFORM_MXC_MMC
 312         select IMX_HAVE_PLATFORM_MXC_NAND
 313         select IMX_HAVE_PLATFORM_MXC_W1
 314         select IMX_HAVE_PLATFORM_SPI_IMX
 315         select MXC_ULPI if USB_ULPI
 316         help
 317           Include support for phyCARD-s (aka pca100) platform. This
 318           includes specific configurations for the module and its peripherals.
 319
 320 config MACH_MXT_TD60
 321         bool "Maxtrack i-MXT TD60"
 322         select SOC_IMX27
 323         select IMX_HAVE_PLATFORM_IMX_FB
 324         select IMX_HAVE_PLATFORM_IMX_I2C
 325         select IMX_HAVE_PLATFORM_IMX_UART
 326         select IMX_HAVE_PLATFORM_MXC_MMC
 327         select IMX_HAVE_PLATFORM_MXC_NAND
 328         help
 329           Include support for i-MXT (aka td60) platform. This
 330           includes specific configurations for the module and its peripherals.
 331
 332 config MACH_IMX27IPCAM
 333         bool "IMX27 IPCAM platform"
 334         select SOC_IMX27
 335         select IMX_HAVE_PLATFORM_IMX2_WDT
 336         select IMX_HAVE_PLATFORM_IMX_UART
 337         help
 338           Include support for IMX27 IPCAM platform. This includes specific
 339           configurations for the board and its peripherals.
 340
 341 endif
 342
 343 if ARCH_IMX_V6_V7
 344
 345 comment "MX31 platforms:"
 346
 347 config MACH_MX31ADS
 348         bool "Support MX31ADS platforms"
 349         select SOC_IMX31
 350         select IMX_HAVE_PLATFORM_IMX_I2C
 351         select IMX_HAVE_PLATFORM_IMX_SSI
 352         select IMX_HAVE_PLATFORM_IMX_UART
 353         default y
 354         help
 355           Include support for MX31ADS platform. This includes specific
 356           configurations for the board and its peripherals.
 357
 358 config MACH_MX31ADS_WM1133_EV1
 359         bool "Support Wolfson Microelectronics 1133-EV1 module"
 360         depends on MACH_MX31ADS
 361         depends on MFD_WM8350_I2C
 362         depends on REGULATOR_WM8350
 363         select MFD_WM8350_CONFIG_MODE_0
 364         select MFD_WM8352_CONFIG_MODE_0
 365         help
 366           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 367           and audio module for the MX31ADS platform.
 368
 369 config MACH_MX31LILLY
 370         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 371         select SOC_IMX31
 372         select IMX_HAVE_PLATFORM_IMX_UART
 373         select IMX_HAVE_PLATFORM_IPU_CORE
 374         select IMX_HAVE_PLATFORM_MXC_EHCI
 375         select IMX_HAVE_PLATFORM_MXC_MMC
 376         select IMX_HAVE_PLATFORM_SPI_IMX
 377         select MXC_ULPI if USB_ULPI
 378         help
 379           Include support for mx31 based LILLY1131 modules. This includes
 380           specific configurations for the board and its peripherals.
 381
 382 config MACH_MX31LITE
 383         bool "Support MX31 LITEKIT (LogicPD)"
 384         select SOC_IMX31
 385         select MXC_ULPI if USB_ULPI
 386         select IMX_HAVE_PLATFORM_IMX2_WDT
 387         select IMX_HAVE_PLATFORM_IMX_UART
 388         select IMX_HAVE_PLATFORM_MXC_EHCI
 389         select IMX_HAVE_PLATFORM_MXC_MMC
 390         select IMX_HAVE_PLATFORM_MXC_NAND
 391         select IMX_HAVE_PLATFORM_MXC_RTC
 392         select IMX_HAVE_PLATFORM_SPI_IMX
 393         select LEDS_GPIO_REGISTER
 394         help
 395           Include support for MX31 LITEKIT platform. This includes specific
 396           configurations for the board and its peripherals.
 397
 398 config MACH_PCM037
 399         bool "Support Phytec pcm037 (i.MX31) platforms"
 400         select SOC_IMX31
 401         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 402         select IMX_HAVE_PLATFORM_IMX2_WDT
 403         select IMX_HAVE_PLATFORM_IMX_I2C
 404         select IMX_HAVE_PLATFORM_IMX_UART
 405         select IMX_HAVE_PLATFORM_IPU_CORE
 406         select IMX_HAVE_PLATFORM_MXC_EHCI
 407         select IMX_HAVE_PLATFORM_MXC_MMC
 408         select IMX_HAVE_PLATFORM_MXC_NAND
 409         select IMX_HAVE_PLATFORM_MXC_W1
 410         select MXC_ULPI if USB_ULPI
 411         help
 412           Include support for Phytec pcm037 platform. This includes
 413           specific configurations for the board and its peripherals.
 414
 415 config MACH_PCM037_EET
 416         bool "Support pcm037 EET board extensions"
 417         depends on MACH_PCM037
 418         select IMX_HAVE_PLATFORM_GPIO_KEYS
 419         select IMX_HAVE_PLATFORM_SPI_IMX
 420         help
 421           Add support for PCM037 EET baseboard extensions. If you are using the
 422           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 423           command-line parameter.
 424
 425 config MACH_MX31_3DS
 426         bool "Support MX31PDK (3DS)"
 427         select SOC_IMX31
 428         select MXC_DEBUG_BOARD
 429         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 430         select IMX_HAVE_PLATFORM_IMX2_WDT
 431         select IMX_HAVE_PLATFORM_IMX_I2C
 432         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 433         select IMX_HAVE_PLATFORM_IMX_UART
 434         select IMX_HAVE_PLATFORM_IPU_CORE
 435         select IMX_HAVE_PLATFORM_MXC_EHCI
 436         select IMX_HAVE_PLATFORM_MXC_MMC
 437         select IMX_HAVE_PLATFORM_MXC_NAND
 438         select IMX_HAVE_PLATFORM_SPI_IMX
 439         select MXC_ULPI if USB_ULPI
 440         help
 441           Include support for MX31PDK (3DS) platform. This includes specific
 442           configurations for the board and its peripherals.
 443
 444 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 445         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 446         depends on MACH_MX31_3DS
 447         depends on MTD_NAND_MXC
 448         help
 449           Enable this if you want that the MXC NAND driver uses the in flash
 450           Bad Block Table to know what blocks are bad instead of scanning the
 451           entire flash looking for bad block markers.
 452
 453 config MACH_MX31MOBOARD
 454         bool "Support mx31moboard platforms (EPFL Mobots group)"
 455         select SOC_IMX31
 456         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 457         select IMX_HAVE_PLATFORM_IMX_I2C
 458         select IMX_HAVE_PLATFORM_IMX_UART
 459         select IMX_HAVE_PLATFORM_IPU_CORE
 460         select IMX_HAVE_PLATFORM_MXC_EHCI
 461         select IMX_HAVE_PLATFORM_MXC_MMC
 462         select IMX_HAVE_PLATFORM_SPI_IMX
 463         select LEDS_GPIO_REGISTER
 464         select MXC_ULPI if USB_ULPI
 465         help
 466           Include support for mx31moboard platform. This includes specific
 467           configurations for the board and its peripherals.
 468
 469 config MACH_QONG
 470         bool "Support Dave/DENX QongEVB-LITE platform"
 471         select SOC_IMX31
 472         select IMX_HAVE_PLATFORM_IMX_UART
 473         select IMX_HAVE_PLATFORM_IMX2_WDT
 474         help
 475           Include support for Dave/DENX QongEVB-LITE platform. This includes
 476           specific configurations for the board and its peripherals.
 477
 478 config MACH_ARMADILLO5X0
 479         bool "Support Atmark Armadillo-500 Development Base Board"
 480         select SOC_IMX31
 481         select IMX_HAVE_PLATFORM_GPIO_KEYS
 482         select IMX_HAVE_PLATFORM_IMX_I2C
 483         select IMX_HAVE_PLATFORM_IMX_UART
 484         select IMX_HAVE_PLATFORM_IPU_CORE
 485         select IMX_HAVE_PLATFORM_MXC_EHCI
 486         select IMX_HAVE_PLATFORM_MXC_MMC
 487         select IMX_HAVE_PLATFORM_MXC_NAND
 488         select MXC_ULPI if USB_ULPI
 489         help
 490           Include support for Atmark Armadillo-500 platform. This includes
 491           specific configurations for the board and its peripherals.
 492
 493 config MACH_KZM_ARM11_01
 494         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 495         select SOC_IMX31
 496         select IMX_HAVE_PLATFORM_IMX_UART
 497         help
 498           Include support for KZM-ARM11-01. This includes specific
 499           configurations for the board and its peripherals.
 500
 501 config MACH_BUG
 502         bool "Support Buglabs BUGBase platform"
 503         select SOC_IMX31
 504         select IMX_HAVE_PLATFORM_IMX_UART
 505         default y
 506         help
 507           Include support for BUGBase 1.3 platform. This includes specific
 508           configurations for the board and its peripherals.
 509
 510 comment "MX35 platforms:"
 511
 512 config MACH_PCM043
 513         bool "Support Phytec pcm043 (i.MX35) platforms"
 514         select SOC_IMX35
 515         select IMX_HAVE_PLATFORM_FLEXCAN
 516         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 517         select IMX_HAVE_PLATFORM_IMX2_WDT
 518         select IMX_HAVE_PLATFORM_IMX_I2C
 519         select IMX_HAVE_PLATFORM_IMX_SSI
 520         select IMX_HAVE_PLATFORM_IMX_UART
 521         select IMX_HAVE_PLATFORM_IPU_CORE
 522         select IMX_HAVE_PLATFORM_MXC_EHCI
 523         select IMX_HAVE_PLATFORM_MXC_NAND
 524         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 525         select MXC_ULPI if USB_ULPI
 526         help
 527           Include support for Phytec pcm043 platform. This includes
 528           specific configurations for the board and its peripherals.
 529
 530 config MACH_MX35_3DS
 531         bool "Support MX35PDK platform"
 532         select SOC_IMX35
 533         select MXC_DEBUG_BOARD
 534         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 535         select IMX_HAVE_PLATFORM_IMX2_WDT
 536         select IMX_HAVE_PLATFORM_IMX_I2C
 537         select IMX_HAVE_PLATFORM_IMX_UART
 538         select IMX_HAVE_PLATFORM_MXC_EHCI
 539         select IMX_HAVE_PLATFORM_MXC_NAND
 540         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 541         help
 542           Include support for MX35PDK platform. This includes specific
 543           configurations for the board and its peripherals.
 544
 545 config MACH_EUKREA_CPUIMX35SD
 546         bool "Support Eukrea CPUIMX35 Platform"
 547         select SOC_IMX35
 548         select IMX_HAVE_PLATFORM_FLEXCAN
 549         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 550         select IMX_HAVE_PLATFORM_IMX2_WDT
 551         select IMX_HAVE_PLATFORM_IMX_I2C
 552         select IMX_HAVE_PLATFORM_IMX_UART
 553         select IMX_HAVE_PLATFORM_MXC_EHCI
 554         select IMX_HAVE_PLATFORM_MXC_NAND
 555         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 556         select MXC_ULPI if USB_ULPI
 557         help
 558           Include support for Eukrea CPUIMX35 platform. This includes
 559           specific configurations for the board and its peripherals.
 560
 561 choice
 562         prompt "Baseboard"
 563         depends on MACH_EUKREA_CPUIMX35SD
 564         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 565
 566 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 567         bool "Eukrea MBIMXSD development board"
 568         select IMX_HAVE_PLATFORM_GPIO_KEYS
 569         select IMX_HAVE_PLATFORM_IMX_SSI
 570         select IMX_HAVE_PLATFORM_IPU_CORE
 571         select LEDS_GPIO_REGISTER
 572         help
 573           This adds board specific devices that can be found on Eukrea's
 574           MBIMXSD evaluation board.
 575
 576 endchoice
 577
 578 config MACH_VPR200
 579         bool "Support VPR200 platform"
 580         select SOC_IMX35
 581         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 582         select IMX_HAVE_PLATFORM_GPIO_KEYS
 583         select IMX_HAVE_PLATFORM_IMX2_WDT
 584         select IMX_HAVE_PLATFORM_IMX_UART
 585         select IMX_HAVE_PLATFORM_IMX_I2C
 586         select IMX_HAVE_PLATFORM_IPU_CORE
 587         select IMX_HAVE_PLATFORM_MXC_EHCI
 588         select IMX_HAVE_PLATFORM_MXC_NAND
 589         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 590         help
 591           Include support for VPR200 platform. This includes specific
 592           configurations for the board and its peripherals.
 593
 594 comment "i.MX6 family:"
 595
 596 config SOC_IMX6Q
 597         bool "i.MX6 Quad support"
 598         select ARM_GIC
 599         select CACHE_L2X0
 600         select CPU_V7
 601         select HAVE_ARM_SCU
 602         select HAVE_IMX_GPC
 603         select HAVE_IMX_MMDC
 604         select HAVE_IMX_SRC
 605         select USE_OF
 606
 607         help
 608           This enables support for Freescale i.MX6 Quad processor.
 609
 610 endif