arch/arm/mach-imx/Kconfig

   1 config IMX_HAVE_DMA_V1
   2         bool
   3
   4 config HAVE_IMX_GPC
   5         bool
   6
   7 config HAVE_IMX_MMDC
   8         bool
   9
  10 config HAVE_IMX_SRC
  11         bool
  12
  13 config ARCH_MX1
  14         bool
  15
  16 config MACH_MX21
  17         bool
  18
  19 config ARCH_MX25
  20         bool
  21
  22 config MACH_MX27
  23         bool
  24
  25 config ARCH_MX5
  26         bool
  27
  28 config ARCH_MX50
  29         bool
  30
  31 config ARCH_MX51
  32         bool
  33
  34 config ARCH_MX53
  35         bool
  36
  37 config SOC_IMX1
  38         bool
  39         select ARCH_MX1
  40         select CPU_ARM920T
  41         select IMX_HAVE_DMA_V1
  42         select IMX_HAVE_IOMUX_V1
  43         select MXC_AVIC
  44
  45 config SOC_IMX21
  46         bool
  47         select MACH_MX21
  48         select CPU_ARM926T
  49         select ARCH_MXC_AUDMUX_V1
  50         select IMX_HAVE_DMA_V1
  51         select IMX_HAVE_IOMUX_V1
  52         select MXC_AVIC
  53
  54 config SOC_IMX25
  55         bool
  56         select ARCH_MX25
  57         select CPU_ARM926T
  58         select ARCH_MXC_AUDMUX_V2
  59         select ARCH_MXC_IOMUX_V3
  60         select MXC_AVIC
  61
  62 config SOC_IMX27
  63         bool
  64         select MACH_MX27
  65         select CPU_ARM926T
  66         select ARCH_MXC_AUDMUX_V1
  67         select IMX_HAVE_DMA_V1
  68         select IMX_HAVE_IOMUX_V1
  69         select MXC_AVIC
  70
  71 config SOC_IMX31
  72         bool
  73         select CPU_V6
  74         select IMX_HAVE_PLATFORM_MXC_RNGA
  75         select ARCH_MXC_AUDMUX_V2
  76         select MXC_AVIC
  77         select SMP_ON_UP if SMP
  78
  79 config SOC_IMX35
  80         bool
  81         select CPU_V6
  82         select ARCH_MXC_IOMUX_V3
  83         select ARCH_MXC_AUDMUX_V2
  84         select HAVE_EPIT
  85         select MXC_AVIC
  86         select SMP_ON_UP if SMP
  87
  88 config SOC_IMX5
  89         select CPU_V7
  90         select ARM_L1_CACHE_SHIFT_6
  91         select MXC_TZIC
  92         select ARCH_MXC_IOMUX_V3
  93         select ARCH_MXC_AUDMUX_V2
  94         select ARCH_HAS_CPUFREQ
  95         select ARCH_MX5
  96         bool
  97
  98 config SOC_IMX50
  99         bool
 100         select SOC_IMX5
 101         select ARCH_MX50
 102
 103 config  SOC_IMX51
 104         bool
 105         select SOC_IMX5
 106         select ARCH_MX5
 107         select ARCH_MX51
 108
 109 config  SOC_IMX53
 110         bool
 111         select SOC_IMX5
 112         select ARCH_MX5
 113         select ARCH_MX53
 114
 115 if ARCH_IMX_V4_V5
 116
 117 comment "MX1 platforms:"
 118 config MACH_MXLADS
 119         bool
 120
 121 config ARCH_MX1ADS
 122         bool "MX1ADS platform"
 123         select MACH_MXLADS
 124         select SOC_IMX1
 125         select IMX_HAVE_PLATFORM_IMX_I2C
 126         select IMX_HAVE_PLATFORM_IMX_UART
 127         help
 128           Say Y here if you are using Motorola MX1ADS/MXLADS boards
 129
 130 config MACH_SCB9328
 131         bool "Synertronixx scb9328"
 132         select IMX_HAVE_PLATFORM_IMX_UART
 133         help
 134           Say Y here if you are using a Synertronixx scb9328 board
 135
 136 config MACH_APF9328
 137         bool "APF9328"
 138         select SOC_IMX1
 139         select IMX_HAVE_PLATFORM_IMX_I2C
 140         select IMX_HAVE_PLATFORM_IMX_UART
 141         help
 142           Say Yes here if you are using the Armadeus APF9328 development board
 143
 144 comment "MX21 platforms:"
 145
 146 config MACH_MX21ADS
 147         bool "MX21ADS platform"
 148         select SOC_IMX21
 149         select IMX_HAVE_PLATFORM_IMX_FB
 150         select IMX_HAVE_PLATFORM_IMX_UART
 151         select IMX_HAVE_PLATFORM_MXC_MMC
 152         select IMX_HAVE_PLATFORM_MXC_NAND
 153         help
 154           Include support for MX21ADS platform. This includes specific
 155           configurations for the board and its peripherals.
 156
 157 comment "MX25 platforms:"
 158
 159 config MACH_MX25_3DS
 160         bool "Support MX25PDK (3DS) Platform"
 161         select SOC_IMX25
 162         select IMX_HAVE_PLATFORM_FLEXCAN
 163         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 164         select IMX_HAVE_PLATFORM_IMX2_WDT
 165         select IMX_HAVE_PLATFORM_IMXDI_RTC
 166         select IMX_HAVE_PLATFORM_IMX_I2C
 167         select IMX_HAVE_PLATFORM_IMX_FB
 168         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 169         select IMX_HAVE_PLATFORM_IMX_UART
 170         select IMX_HAVE_PLATFORM_MXC_EHCI
 171         select IMX_HAVE_PLATFORM_MXC_NAND
 172         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 173
 174 config MACH_EUKREA_CPUIMX25SD
 175         bool "Support Eukrea CPUIMX25 Platform"
 176         select SOC_IMX25
 177         select IMX_HAVE_PLATFORM_FLEXCAN
 178         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 179         select IMX_HAVE_PLATFORM_IMXDI_RTC
 180         select IMX_HAVE_PLATFORM_IMX_FB
 181         select IMX_HAVE_PLATFORM_IMX_I2C
 182         select IMX_HAVE_PLATFORM_IMX_UART
 183         select IMX_HAVE_PLATFORM_MXC_EHCI
 184         select IMX_HAVE_PLATFORM_MXC_NAND
 185         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 186         select MXC_ULPI if USB_ULPI
 187
 188 choice
 189         prompt "Baseboard"
 190         depends on MACH_EUKREA_CPUIMX25SD
 191         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 192
 193 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 194         bool "Eukrea MBIMXSD development board"
 195         select IMX_HAVE_PLATFORM_GPIO_KEYS
 196         select IMX_HAVE_PLATFORM_IMX_SSI
 197         select LEDS_GPIO_REGISTER
 198         help
 199           This adds board specific devices that can be found on Eukrea's
 200           MBIMXSD evaluation board.
 201
 202 endchoice
 203
 204 comment "MX27 platforms:"
 205
 206 config MACH_MX27ADS
 207         bool "MX27ADS platform"
 208         select SOC_IMX27
 209         select IMX_HAVE_PLATFORM_IMX_FB
 210         select IMX_HAVE_PLATFORM_IMX_I2C
 211         select IMX_HAVE_PLATFORM_IMX_UART
 212         select IMX_HAVE_PLATFORM_MXC_MMC
 213         select IMX_HAVE_PLATFORM_MXC_NAND
 214         select IMX_HAVE_PLATFORM_MXC_W1
 215         help
 216           Include support for MX27ADS platform. This includes specific
 217           configurations for the board and its peripherals.
 218
 219 config MACH_PCM038
 220         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 221         select SOC_IMX27
 222         select IMX_HAVE_PLATFORM_IMX2_WDT
 223         select IMX_HAVE_PLATFORM_IMX_I2C
 224         select IMX_HAVE_PLATFORM_IMX_UART
 225         select IMX_HAVE_PLATFORM_MXC_EHCI
 226         select IMX_HAVE_PLATFORM_MXC_NAND
 227         select IMX_HAVE_PLATFORM_MXC_W1
 228         select IMX_HAVE_PLATFORM_SPI_IMX
 229         select MXC_ULPI if USB_ULPI
 230         help
 231           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 232           includes specific configurations for the module and its peripherals.
 233
 234 choice
 235         prompt "Baseboard"
 236         depends on MACH_PCM038
 237         default MACH_PCM970_BASEBOARD
 238
 239 config MACH_PCM970_BASEBOARD
 240         bool "PHYTEC PCM970 development board"
 241         select IMX_HAVE_PLATFORM_IMX_FB
 242         select IMX_HAVE_PLATFORM_MXC_MMC
 243         help
 244           This adds board specific devices that can be found on Phytec's
 245           PCM970 evaluation board.
 246
 247 endchoice
 248
 249 config MACH_CPUIMX27
 250         bool "Eukrea CPUIMX27 module"
 251         select SOC_IMX27
 252         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 253         select IMX_HAVE_PLATFORM_IMX2_WDT
 254         select IMX_HAVE_PLATFORM_IMX_I2C
 255         select IMX_HAVE_PLATFORM_IMX_UART
 256         select IMX_HAVE_PLATFORM_MXC_EHCI
 257         select IMX_HAVE_PLATFORM_MXC_NAND
 258         select IMX_HAVE_PLATFORM_MXC_W1
 259         select MXC_ULPI if USB_ULPI
 260         help
 261           Include support for Eukrea CPUIMX27 platform. This includes
 262           specific configurations for the module and its peripherals.
 263
 264 config MACH_EUKREA_CPUIMX27_USESDHC2
 265         bool "CPUIMX27 integrates SDHC2 module"
 266         depends on MACH_CPUIMX27
 267         select IMX_HAVE_PLATFORM_MXC_MMC
 268         help
 269           This adds support for the internal SDHC2 used on CPUIMX27
 270           for wifi or eMMC.
 271
 272 config MACH_EUKREA_CPUIMX27_USEUART4
 273         bool "CPUIMX27 integrates UART4 module"
 274         depends on MACH_CPUIMX27
 275         help
 276           This adds support for the internal UART4 used on CPUIMX27
 277           for bluetooth.
 278
 279 choice
 280         prompt "Baseboard"
 281         depends on MACH_CPUIMX27
 282         default MACH_EUKREA_MBIMX27_BASEBOARD
 283
 284 config MACH_EUKREA_MBIMX27_BASEBOARD
 285         bool "Eukrea MBIMX27 development board"
 286         select IMX_HAVE_PLATFORM_IMX_FB
 287         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 288         select IMX_HAVE_PLATFORM_IMX_SSI
 289         select IMX_HAVE_PLATFORM_IMX_UART
 290         select IMX_HAVE_PLATFORM_MXC_MMC
 291         select IMX_HAVE_PLATFORM_SPI_IMX
 292         select LEDS_GPIO_REGISTER
 293         help
 294           This adds board specific devices that can be found on Eukrea's
 295           MBIMX27 evaluation board.
 296
 297 endchoice
 298
 299 config MACH_MX27_3DS
 300         bool "MX27PDK platform"
 301         select SOC_IMX27
 302         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 303         select IMX_HAVE_PLATFORM_IMX2_WDT
 304         select IMX_HAVE_PLATFORM_IMX_FB
 305         select IMX_HAVE_PLATFORM_IMX_I2C
 306         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 307         select IMX_HAVE_PLATFORM_IMX_UART
 308         select IMX_HAVE_PLATFORM_MXC_EHCI
 309         select IMX_HAVE_PLATFORM_MXC_MMC
 310         select IMX_HAVE_PLATFORM_SPI_IMX
 311         select MXC_DEBUG_BOARD
 312         select MXC_ULPI if USB_ULPI
 313         help
 314           Include support for MX27PDK platform. This includes specific
 315           configurations for the board and its peripherals.
 316
 317 config MACH_IMX27_VISSTRIM_M10
 318         bool "Vista Silicon i.MX27 Visstrim_m10"
 319         select SOC_IMX27
 320         select IMX_HAVE_PLATFORM_GPIO_KEYS
 321         select IMX_HAVE_PLATFORM_IMX_I2C
 322         select IMX_HAVE_PLATFORM_IMX_SSI
 323         select IMX_HAVE_PLATFORM_IMX_UART
 324         select IMX_HAVE_PLATFORM_MXC_MMC
 325         select IMX_HAVE_PLATFORM_MXC_EHCI
 326         help
 327           Include support for Visstrim_m10 platform and its different variants.
 328           This includes specific configurations for the board and its
 329           peripherals.
 330
 331 config MACH_IMX27LITE
 332         bool "LogicPD MX27 LITEKIT platform"
 333         select SOC_IMX27
 334         select IMX_HAVE_PLATFORM_IMX_UART
 335         select IMX_HAVE_PLATFORM_IMX_SSI
 336         help
 337           Include support for MX27 LITEKIT platform. This includes specific
 338           configurations for the board and its peripherals.
 339
 340 config MACH_PCA100
 341         bool "Phytec phyCARD-s (pca100)"
 342         select SOC_IMX27
 343         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 344         select IMX_HAVE_PLATFORM_IMX2_WDT
 345         select IMX_HAVE_PLATFORM_IMX_FB
 346         select IMX_HAVE_PLATFORM_IMX_I2C
 347         select IMX_HAVE_PLATFORM_IMX_SSI
 348         select IMX_HAVE_PLATFORM_IMX_UART
 349         select IMX_HAVE_PLATFORM_MXC_EHCI
 350         select IMX_HAVE_PLATFORM_MXC_MMC
 351         select IMX_HAVE_PLATFORM_MXC_NAND
 352         select IMX_HAVE_PLATFORM_MXC_W1
 353         select IMX_HAVE_PLATFORM_SPI_IMX
 354         select MXC_ULPI if USB_ULPI
 355         help
 356           Include support for phyCARD-s (aka pca100) platform. This
 357           includes specific configurations for the module and its peripherals.
 358
 359 config MACH_MXT_TD60
 360         bool "Maxtrack i-MXT TD60"
 361         select SOC_IMX27
 362         select IMX_HAVE_PLATFORM_IMX_FB
 363         select IMX_HAVE_PLATFORM_IMX_I2C
 364         select IMX_HAVE_PLATFORM_IMX_UART
 365         select IMX_HAVE_PLATFORM_MXC_MMC
 366         select IMX_HAVE_PLATFORM_MXC_NAND
 367         help
 368           Include support for i-MXT (aka td60) platform. This
 369           includes specific configurations for the module and its peripherals.
 370
 371 config MACH_IMX27IPCAM
 372         bool "IMX27 IPCAM platform"
 373         select SOC_IMX27
 374         select IMX_HAVE_PLATFORM_IMX2_WDT
 375         select IMX_HAVE_PLATFORM_IMX_UART
 376         help
 377           Include support for IMX27 IPCAM platform. This includes specific
 378           configurations for the board and its peripherals.
 379
 380 endif
 381
 382 if ARCH_IMX_V6_V7
 383
 384 comment "MX31 platforms:"
 385
 386 config MACH_MX31ADS
 387         bool "Support MX31ADS platforms"
 388         select SOC_IMX31
 389         select IMX_HAVE_PLATFORM_IMX_I2C
 390         select IMX_HAVE_PLATFORM_IMX_SSI
 391         select IMX_HAVE_PLATFORM_IMX_UART
 392         default y
 393         help
 394           Include support for MX31ADS platform. This includes specific
 395           configurations for the board and its peripherals.
 396
 397 config MACH_MX31ADS_WM1133_EV1
 398         bool "Support Wolfson Microelectronics 1133-EV1 module"
 399         depends on MACH_MX31ADS
 400         depends on MFD_WM8350_I2C
 401         depends on REGULATOR_WM8350
 402         select MFD_WM8350_CONFIG_MODE_0
 403         select MFD_WM8352_CONFIG_MODE_0
 404         help
 405           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 406           and audio module for the MX31ADS platform.
 407
 408 config MACH_MX31LILLY
 409         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 410         select SOC_IMX31
 411         select IMX_HAVE_PLATFORM_IMX_UART
 412         select IMX_HAVE_PLATFORM_IPU_CORE
 413         select IMX_HAVE_PLATFORM_MXC_EHCI
 414         select IMX_HAVE_PLATFORM_MXC_MMC
 415         select IMX_HAVE_PLATFORM_SPI_IMX
 416         select MXC_ULPI if USB_ULPI
 417         help
 418           Include support for mx31 based LILLY1131 modules. This includes
 419           specific configurations for the board and its peripherals.
 420
 421 config MACH_MX31LITE
 422         bool "Support MX31 LITEKIT (LogicPD)"
 423         select SOC_IMX31
 424         select MXC_ULPI if USB_ULPI
 425         select IMX_HAVE_PLATFORM_IMX2_WDT
 426         select IMX_HAVE_PLATFORM_IMX_UART
 427         select IMX_HAVE_PLATFORM_MXC_EHCI
 428         select IMX_HAVE_PLATFORM_MXC_MMC
 429         select IMX_HAVE_PLATFORM_MXC_NAND
 430         select IMX_HAVE_PLATFORM_MXC_RTC
 431         select IMX_HAVE_PLATFORM_SPI_IMX
 432         select LEDS_GPIO_REGISTER
 433         help
 434           Include support for MX31 LITEKIT platform. This includes specific
 435           configurations for the board and its peripherals.
 436
 437 config MACH_PCM037
 438         bool "Support Phytec pcm037 (i.MX31) platforms"
 439         select SOC_IMX31
 440         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 441         select IMX_HAVE_PLATFORM_IMX2_WDT
 442         select IMX_HAVE_PLATFORM_IMX_I2C
 443         select IMX_HAVE_PLATFORM_IMX_UART
 444         select IMX_HAVE_PLATFORM_IPU_CORE
 445         select IMX_HAVE_PLATFORM_MXC_EHCI
 446         select IMX_HAVE_PLATFORM_MXC_MMC
 447         select IMX_HAVE_PLATFORM_MXC_NAND
 448         select IMX_HAVE_PLATFORM_MXC_W1
 449         select MXC_ULPI if USB_ULPI
 450         help
 451           Include support for Phytec pcm037 platform. This includes
 452           specific configurations for the board and its peripherals.
 453
 454 config MACH_PCM037_EET
 455         bool "Support pcm037 EET board extensions"
 456         depends on MACH_PCM037
 457         select IMX_HAVE_PLATFORM_GPIO_KEYS
 458         select IMX_HAVE_PLATFORM_SPI_IMX
 459         help
 460           Add support for PCM037 EET baseboard extensions. If you are using the
 461           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 462           command-line parameter.
 463
 464 config MACH_MX31_3DS
 465         bool "Support MX31PDK (3DS)"
 466         select SOC_IMX31
 467         select MXC_DEBUG_BOARD
 468         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 469         select IMX_HAVE_PLATFORM_IMX2_WDT
 470         select IMX_HAVE_PLATFORM_IMX_I2C
 471         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 472         select IMX_HAVE_PLATFORM_IMX_UART
 473         select IMX_HAVE_PLATFORM_IPU_CORE
 474         select IMX_HAVE_PLATFORM_MXC_EHCI
 475         select IMX_HAVE_PLATFORM_MXC_MMC
 476         select IMX_HAVE_PLATFORM_MXC_NAND
 477         select IMX_HAVE_PLATFORM_SPI_IMX
 478         select MXC_ULPI if USB_ULPI
 479         help
 480           Include support for MX31PDK (3DS) platform. This includes specific
 481           configurations for the board and its peripherals.
 482
 483 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 484         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 485         depends on MACH_MX31_3DS
 486         depends on MTD_NAND_MXC
 487         help
 488           Enable this if you want that the MXC NAND driver uses the in flash
 489           Bad Block Table to know what blocks are bad instead of scanning the
 490           entire flash looking for bad block markers.
 491
 492 config MACH_MX31MOBOARD
 493         bool "Support mx31moboard platforms (EPFL Mobots group)"
 494         select SOC_IMX31
 495         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 496         select IMX_HAVE_PLATFORM_IMX_I2C
 497         select IMX_HAVE_PLATFORM_IMX_UART
 498         select IMX_HAVE_PLATFORM_IPU_CORE
 499         select IMX_HAVE_PLATFORM_MXC_EHCI
 500         select IMX_HAVE_PLATFORM_MXC_MMC
 501         select IMX_HAVE_PLATFORM_SPI_IMX
 502         select LEDS_GPIO_REGISTER
 503         select MXC_ULPI if USB_ULPI
 504         help
 505           Include support for mx31moboard platform. This includes specific
 506           configurations for the board and its peripherals.
 507
 508 config MACH_QONG
 509         bool "Support Dave/DENX QongEVB-LITE platform"
 510         select SOC_IMX31
 511         select IMX_HAVE_PLATFORM_IMX_UART
 512         select IMX_HAVE_PLATFORM_IMX2_WDT
 513         help
 514           Include support for Dave/DENX QongEVB-LITE platform. This includes
 515           specific configurations for the board and its peripherals.
 516
 517 config MACH_ARMADILLO5X0
 518         bool "Support Atmark Armadillo-500 Development Base Board"
 519         select SOC_IMX31
 520         select IMX_HAVE_PLATFORM_GPIO_KEYS
 521         select IMX_HAVE_PLATFORM_IMX_I2C
 522         select IMX_HAVE_PLATFORM_IMX_UART
 523         select IMX_HAVE_PLATFORM_IPU_CORE
 524         select IMX_HAVE_PLATFORM_MXC_EHCI
 525         select IMX_HAVE_PLATFORM_MXC_MMC
 526         select IMX_HAVE_PLATFORM_MXC_NAND
 527         select MXC_ULPI if USB_ULPI
 528         help
 529           Include support for Atmark Armadillo-500 platform. This includes
 530           specific configurations for the board and its peripherals.
 531
 532 config MACH_KZM_ARM11_01
 533         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 534         select SOC_IMX31
 535         select IMX_HAVE_PLATFORM_IMX_UART
 536         help
 537           Include support for KZM-ARM11-01. This includes specific
 538           configurations for the board and its peripherals.
 539
 540 config MACH_BUG
 541         bool "Support Buglabs BUGBase platform"
 542         select SOC_IMX31
 543         select IMX_HAVE_PLATFORM_IMX_UART
 544         default y
 545         help
 546           Include support for BUGBase 1.3 platform. This includes specific
 547           configurations for the board and its peripherals.
 548
 549 comment "MX35 platforms:"
 550
 551 config MACH_PCM043
 552         bool "Support Phytec pcm043 (i.MX35) platforms"
 553         select SOC_IMX35
 554         select IMX_HAVE_PLATFORM_FLEXCAN
 555         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 556         select IMX_HAVE_PLATFORM_IMX2_WDT
 557         select IMX_HAVE_PLATFORM_IMX_I2C
 558         select IMX_HAVE_PLATFORM_IMX_SSI
 559         select IMX_HAVE_PLATFORM_IMX_UART
 560         select IMX_HAVE_PLATFORM_IPU_CORE
 561         select IMX_HAVE_PLATFORM_MXC_EHCI
 562         select IMX_HAVE_PLATFORM_MXC_NAND
 563         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 564         select MXC_ULPI if USB_ULPI
 565         help
 566           Include support for Phytec pcm043 platform. This includes
 567           specific configurations for the board and its peripherals.
 568
 569 config MACH_MX35_3DS
 570         bool "Support MX35PDK platform"
 571         select SOC_IMX35
 572         select MXC_DEBUG_BOARD
 573         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 574         select IMX_HAVE_PLATFORM_IMX2_WDT
 575         select IMX_HAVE_PLATFORM_IMX_I2C
 576         select IMX_HAVE_PLATFORM_IMX_UART
 577         select IMX_HAVE_PLATFORM_MXC_EHCI
 578         select IMX_HAVE_PLATFORM_MXC_NAND
 579         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 580         help
 581           Include support for MX35PDK platform. This includes specific
 582           configurations for the board and its peripherals.
 583
 584 config MACH_EUKREA_CPUIMX35SD
 585         bool "Support Eukrea CPUIMX35 Platform"
 586         select SOC_IMX35
 587         select IMX_HAVE_PLATFORM_FLEXCAN
 588         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 589         select IMX_HAVE_PLATFORM_IMX2_WDT
 590         select IMX_HAVE_PLATFORM_IMX_I2C
 591         select IMX_HAVE_PLATFORM_IMX_UART
 592         select IMX_HAVE_PLATFORM_MXC_EHCI
 593         select IMX_HAVE_PLATFORM_MXC_NAND
 594         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 595         select MXC_ULPI if USB_ULPI
 596         help
 597           Include support for Eukrea CPUIMX35 platform. This includes
 598           specific configurations for the board and its peripherals.
 599
 600 choice
 601         prompt "Baseboard"
 602         depends on MACH_EUKREA_CPUIMX35SD
 603         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 604
 605 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 606         bool "Eukrea MBIMXSD development board"
 607         select IMX_HAVE_PLATFORM_GPIO_KEYS
 608         select IMX_HAVE_PLATFORM_IMX_SSI
 609         select IMX_HAVE_PLATFORM_IPU_CORE
 610         select LEDS_GPIO_REGISTER
 611         help
 612           This adds board specific devices that can be found on Eukrea's
 613           MBIMXSD evaluation board.
 614
 615 endchoice
 616
 617 config MACH_VPR200
 618         bool "Support VPR200 platform"
 619         select SOC_IMX35
 620         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 621         select IMX_HAVE_PLATFORM_GPIO_KEYS
 622         select IMX_HAVE_PLATFORM_IMX2_WDT
 623         select IMX_HAVE_PLATFORM_IMX_UART
 624         select IMX_HAVE_PLATFORM_IMX_I2C
 625         select IMX_HAVE_PLATFORM_IPU_CORE
 626         select IMX_HAVE_PLATFORM_MXC_EHCI
 627         select IMX_HAVE_PLATFORM_MXC_NAND
 628         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 629         help
 630           Include support for VPR200 platform. This includes specific
 631           configurations for the board and its peripherals.
 632
 633 comment "i.MX5 platforms:"
 634
 635 config MACH_MX50_RDP
 636         bool "Support MX50 reference design platform"
 637         depends on BROKEN
 638         select SOC_IMX50
 639         select IMX_HAVE_PLATFORM_IMX_I2C
 640         select IMX_HAVE_PLATFORM_IMX_UART
 641         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 642         select IMX_HAVE_PLATFORM_SPI_IMX
 643         help
 644           Include support for MX50 reference design platform (RDP) board. This
 645           includes specific configurations for the board and its peripherals.
 646
 647 comment "i.MX51 machines:"
 648
 649 config MACH_IMX51_DT
 650         bool "Support i.MX51 platforms from device tree"
 651         select SOC_IMX51
 652         select USE_OF
 653         select MACH_MX51_BABBAGE
 654         help
 655           Include support for Freescale i.MX51 based platforms
 656           using the device tree for discovery
 657
 658 config MACH_MX51_BABBAGE
 659         bool "Support MX51 BABBAGE platforms"
 660         select SOC_IMX51
 661         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 662         select IMX_HAVE_PLATFORM_IMX2_WDT
 663         select IMX_HAVE_PLATFORM_IMX_I2C
 664         select IMX_HAVE_PLATFORM_IMX_UART
 665         select IMX_HAVE_PLATFORM_MXC_EHCI
 666         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 667         select IMX_HAVE_PLATFORM_SPI_IMX
 668         help
 669           Include support for MX51 Babbage platform, also known as MX51EVK in
 670           u-boot. This includes specific configurations for the board and its
 671           peripherals.
 672
 673 config MACH_MX51_3DS
 674         bool "Support MX51PDK (3DS)"
 675         select SOC_IMX51
 676         select IMX_HAVE_PLATFORM_IMX2_WDT
 677         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 678         select IMX_HAVE_PLATFORM_IMX_UART
 679         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 680         select IMX_HAVE_PLATFORM_SPI_IMX
 681         select MXC_DEBUG_BOARD
 682         help
 683           Include support for MX51PDK (3DS) platform. This includes specific
 684           configurations for the board and its peripherals.
 685
 686 config MACH_EUKREA_CPUIMX51
 687         bool "Support Eukrea CPUIMX51 module"
 688         select SOC_IMX51
 689         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 690         select IMX_HAVE_PLATFORM_IMX_I2C
 691         select IMX_HAVE_PLATFORM_IMX_UART
 692         select IMX_HAVE_PLATFORM_MXC_EHCI
 693         select IMX_HAVE_PLATFORM_MXC_NAND
 694         select IMX_HAVE_PLATFORM_SPI_IMX
 695         help
 696           Include support for Eukrea CPUIMX51 platform. This includes
 697           specific configurations for the module and its peripherals.
 698
 699 choice
 700         prompt "Baseboard"
 701         depends on MACH_EUKREA_CPUIMX51
 702         default MACH_EUKREA_MBIMX51_BASEBOARD
 703
 704 config MACH_EUKREA_MBIMX51_BASEBOARD
 705         prompt "Eukrea MBIMX51 development board"
 706         bool
 707         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 708         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 709         select LEDS_GPIO_REGISTER
 710         help
 711           This adds board specific devices that can be found on Eukrea's
 712           MBIMX51 evaluation board.
 713
 714 endchoice
 715
 716 config MACH_EUKREA_CPUIMX51SD
 717         bool "Support Eukrea CPUIMX51SD module"
 718         select SOC_IMX51
 719         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 720         select IMX_HAVE_PLATFORM_IMX_I2C
 721         select IMX_HAVE_PLATFORM_IMX_UART
 722         select IMX_HAVE_PLATFORM_MXC_EHCI
 723         select IMX_HAVE_PLATFORM_MXC_NAND
 724         select IMX_HAVE_PLATFORM_SPI_IMX
 725         help
 726           Include support for Eukrea CPUIMX51SD platform. This includes
 727           specific configurations for the module and its peripherals.
 728
 729 choice
 730         prompt "Baseboard"
 731         depends on MACH_EUKREA_CPUIMX51SD
 732         default MACH_EUKREA_MBIMXSD51_BASEBOARD
 733
 734 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 735         prompt "Eukrea MBIMXSD development board"
 736         bool
 737         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 738         select LEDS_GPIO_REGISTER
 739         help
 740           This adds board specific devices that can be found on Eukrea's
 741           MBIMXSD evaluation board.
 742
 743 endchoice
 744
 745 config MX51_EFIKA_COMMON
 746         bool
 747         select SOC_IMX51
 748         select IMX_HAVE_PLATFORM_IMX_UART
 749         select IMX_HAVE_PLATFORM_MXC_EHCI
 750         select IMX_HAVE_PLATFORM_PATA_IMX
 751         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 752         select IMX_HAVE_PLATFORM_SPI_IMX
 753         select MXC_ULPI if USB_ULPI
 754
 755 config MACH_MX51_EFIKAMX
 756         bool "Support MX51 Genesi Efika MX nettop"
 757         select LEDS_GPIO_REGISTER
 758         select MX51_EFIKA_COMMON
 759         help
 760           Include support for Genesi Efika MX nettop. This includes specific
 761           configurations for the board and its peripherals.
 762
 763 config MACH_MX51_EFIKASB
 764         bool "Support MX51 Genesi Efika Smartbook"
 765         select LEDS_GPIO_REGISTER
 766         select MX51_EFIKA_COMMON
 767         help
 768           Include support for Genesi Efika Smartbook. This includes specific
 769           configurations for the board and its peripherals.
 770
 771 comment "i.MX53 machines:"
 772
 773 config MACH_IMX53_DT
 774         bool "Support i.MX53 platforms from device tree"
 775         select SOC_IMX53
 776         select USE_OF
 777         select MACH_MX53_ARD
 778         select MACH_MX53_EVK
 779         select MACH_MX53_LOCO
 780         select MACH_MX53_SMD
 781         help
 782           Include support for Freescale i.MX53 based platforms
 783           using the device tree for discovery
 784
 785 config MACH_MX53_EVK
 786         bool "Support MX53 EVK platforms"
 787         select SOC_IMX53
 788         select IMX_HAVE_PLATFORM_IMX2_WDT
 789         select IMX_HAVE_PLATFORM_IMX_UART
 790         select IMX_HAVE_PLATFORM_IMX_I2C
 791         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 792         select IMX_HAVE_PLATFORM_SPI_IMX
 793         select LEDS_GPIO_REGISTER
 794         help
 795           Include support for MX53 EVK platform. This includes specific
 796           configurations for the board and its peripherals.
 797
 798 config MACH_MX53_SMD
 799         bool "Support MX53 SMD platforms"
 800         select SOC_IMX53
 801         select IMX_HAVE_PLATFORM_IMX2_WDT
 802         select IMX_HAVE_PLATFORM_IMX_I2C
 803         select IMX_HAVE_PLATFORM_IMX_UART
 804         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 805         help
 806           Include support for MX53 SMD platform. This includes specific
 807           configurations for the board and its peripherals.
 808
 809 config MACH_MX53_LOCO
 810         bool "Support MX53 LOCO platforms"
 811         select SOC_IMX53
 812         select IMX_HAVE_PLATFORM_IMX2_WDT
 813         select IMX_HAVE_PLATFORM_IMX_I2C
 814         select IMX_HAVE_PLATFORM_IMX_UART
 815         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 816         select IMX_HAVE_PLATFORM_GPIO_KEYS
 817         select LEDS_GPIO_REGISTER
 818         help
 819           Include support for MX53 LOCO platform. This includes specific
 820           configurations for the board and its peripherals.
 821
 822 config MACH_MX53_ARD
 823         bool "Support MX53 ARD platforms"
 824         select SOC_IMX53
 825         select IMX_HAVE_PLATFORM_IMX2_WDT
 826         select IMX_HAVE_PLATFORM_IMX_I2C
 827         select IMX_HAVE_PLATFORM_IMX_UART
 828         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 829         select IMX_HAVE_PLATFORM_GPIO_KEYS
 830         help
 831           Include support for MX53 ARD platform. This includes specific
 832           configurations for the board and its peripherals.
 833
 834 comment "i.MX6 family:"
 835
 836 config SOC_IMX6Q
 837         bool "i.MX6 Quad support"
 838         select ARM_CPU_SUSPEND if PM
 839         select ARM_GIC
 840         select CPU_V7
 841         select HAVE_ARM_SCU
 842         select HAVE_IMX_GPC
 843         select HAVE_IMX_MMDC
 844         select HAVE_IMX_SRC
 845         select HAVE_SMP
 846         select USE_OF
 847
 848         help
 849           This enables support for Freescale i.MX6 Quad processor.
 850
 851 endif