arch/arm/mach-imx/ehci-imx25.c

   1 /*
   2  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
   3  * Copyright (C) 2010 Freescale Semiconductor, Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License as published by the
   7  * Free Software Foundation; either version 2 of the License, or (at your
   8  * option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful, but
  11  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  12  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  13  * for more details.
  14  */
  15
  16 #include <linux/platform_device.h>
  17 #include <linux/io.h>
  18 #include <linux/platform_data/usb-ehci-mxc.h>
  19
  20 #include "ehci.h"
  21 #include "hardware.h"
  22
  23 #define USBCTRL_OTGBASE_OFFSET  0x600
  24
  25 #define MX25_OTG_SIC_SHIFT      29
  26 #define MX25_OTG_SIC_MASK       (0x3 << MX25_OTG_SIC_SHIFT)
  27 #define MX25_OTG_PM_BIT         (1 << 24)
  28 #define MX25_OTG_PP_BIT         (1 << 11)
  29 #define MX25_OTG_OCPOL_BIT      (1 << 3)
  30
  31 #define MX25_H1_SIC_SHIFT       21
  32 #define MX25_H1_SIC_MASK        (0x3 << MX25_H1_SIC_SHIFT)
  33 #define MX25_H1_PP_BIT          (1 << 18)
  34 #define MX25_H1_PM_BIT          (1 << 16)
  35 #define MX25_H1_IPPUE_UP_BIT    (1 << 7)
  36 #define MX25_H1_IPPUE_DOWN_BIT  (1 << 6)
  37 #define MX25_H1_TLL_BIT         (1 << 5)
  38 #define MX25_H1_USBTE_BIT       (1 << 4)
  39 #define MX25_H1_OCPOL_BIT       (1 << 2)
  40
  41 int mx25_initialize_usb_hw(int port, unsigned int flags)
  42 {
  43         unsigned int v;
  44
  45         v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
  46
  47         switch (port) {
  48         case 0: /* OTG port */
  49                 v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
  50                         MX25_OTG_OCPOL_BIT);
  51                 v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
  52
  53                 if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
  54                         v |= MX25_OTG_PM_BIT;
  55
  56                 if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
  57                         v |= MX25_OTG_PP_BIT;
  58
  59                 if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
  60                         v |= MX25_OTG_OCPOL_BIT;
  61
  62                 break;
  63         case 1: /* H1 port */
  64                 v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
  65                         MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
  66                         MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
  67                 v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
  68
  69                 if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
  70                         v |= MX25_H1_PM_BIT;
  71
  72                 if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
  73                         v |= MX25_H1_PP_BIT;
  74
  75                 if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
  76                         v |= MX25_H1_OCPOL_BIT;
  77
  78                 if (!(flags & MXC_EHCI_TTL_ENABLED))
  79                         v |= MX25_H1_TLL_BIT;
  80
  81                 if (flags & MXC_EHCI_INTERNAL_PHY)
  82                         v |= MX25_H1_USBTE_BIT;
  83
  84                 if (flags & MXC_EHCI_IPPUE_DOWN)
  85                         v |= MX25_H1_IPPUE_DOWN_BIT;
  86
  87                 if (flags & MXC_EHCI_IPPUE_UP)
  88                         v |= MX25_H1_IPPUE_UP_BIT;
  89
  90                 break;
  91         default:
  92                 return -EINVAL;
  93         }
  94
  95         writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
  96
  97         return 0;
  98 }
  99