Merge git://git.kvack.org/~bcrl/aio-next
[deliverable/linux.git] / arch / arm / mach-imx / mach-imx51.c
1 /*
2 * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
3 * Copyright 2011 Linaro Ltd.
4 *
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
8 *
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
11 */
12
13 #include <linux/io.h>
14 #include <linux/irq.h>
15 #include <linux/of_irq.h>
16 #include <linux/of_platform.h>
17 #include <asm/mach/arch.h>
18 #include <asm/mach/time.h>
19
20 #include "common.h"
21 #include "hardware.h"
22
23 static void __init imx51_init_early(void)
24 {
25 mxc_set_cpu_type(MXC_CPU_MX51);
26 }
27
28 /*
29 * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
30 * the Freescale marketing division. However this did not remove the
31 * hardware from the chip which still needs to be configured for proper
32 * IPU support.
33 */
34 #define MX51_MIPI_HSC_BASE 0x83fdc000
35 static void __init imx51_ipu_mipi_setup(void)
36 {
37 void __iomem *hsc_addr;
38
39 hsc_addr = ioremap(MX51_MIPI_HSC_BASE, SZ_16K);
40 WARN_ON(!hsc_addr);
41
42 /* setup MIPI module to legacy mode */
43 __raw_writel(0xf00, hsc_addr);
44
45 /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
46 __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
47 hsc_addr + 0x800);
48
49 iounmap(hsc_addr);
50 }
51
52 static void __init imx51_dt_init(void)
53 {
54 struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
55
56 mxc_arch_reset_init_dt();
57 imx51_ipu_mipi_setup();
58 imx_src_init();
59
60 of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
61 platform_device_register_full(&devinfo);
62 }
63
64 static void __init imx51_init_late(void)
65 {
66 mx51_neon_fixup();
67 imx51_pm_init();
68 }
69
70 static const char * const imx51_dt_board_compat[] __initconst = {
71 "fsl,imx51",
72 NULL
73 };
74
75 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
76 .init_early = imx51_init_early,
77 .init_irq = tzic_init_irq,
78 .init_machine = imx51_dt_init,
79 .init_late = imx51_init_late,
80 .dt_compat = imx51_dt_board_compat,
81 .restart = mxc_restart,
82 MACHINE_END
This page took 0.03119 seconds and 5 git commands to generate.