Pull acpi_device_handle_cleanup into release branch
[deliverable/linux.git] / arch / arm / mach-iop3xx / common.c
1 /*
2 * arch/arm/mach-iop3xx/common.c
3 *
4 * Common routines shared across all IOP3xx implementations
5 *
6 * Author: Deepak Saxena <dsaxena@mvista.com>
7 *
8 * Copyright 2003 (c) MontaVista, Software, Inc.
9 *
10 * This file is licensed under the terms of the GNU General Public
11 * License version 2. This program is licensed "as is" without any
12 * warranty of any kind, whether express or implied.
13 */
14
15 #include <linux/delay.h>
16 #include <asm/hardware.h>
17
18 /*
19 * Shared variables
20 */
21 unsigned long iop3xx_pcibios_min_io = 0;
22 unsigned long iop3xx_pcibios_min_mem = 0;
23
24 #ifdef CONFIG_ARCH_EP80219
25 #include <linux/kernel.h>
26 /*
27 * Default power-off for EP80219
28 */
29
30 static inline void ep80219_send_to_pic(__u8 c) {
31 }
32
33 void ep80219_power_off(void)
34 {
35 /*
36 * This function will send a SHUTDOWN_COMPLETE message to the PIC controller
37 * over I2C. We are not using the i2c subsystem since we are going to power
38 * off and it may be removed
39 */
40
41 /* Send the Address byte w/ the start condition */
42 *IOP321_IDBR1 = 0x60;
43 *IOP321_ICR1 = 0xE9;
44 mdelay(1);
45
46 /* Send the START_MSG byte w/ no start or stop condition */
47 *IOP321_IDBR1 = 0x0F;
48 *IOP321_ICR1 = 0xE8;
49 mdelay(1);
50
51 /* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */
52 *IOP321_IDBR1 = 0x03;
53 *IOP321_ICR1 = 0xE8;
54 mdelay(1);
55
56 /* Send an ignored byte w/ stop condition */
57 *IOP321_IDBR1 = 0x00;
58 *IOP321_ICR1 = 0xEA;
59
60 while (1) ;
61 }
62
63 #include <linux/init.h>
64 #include <linux/pm.h>
65
66 static int __init ep80219_init(void)
67 {
68 pm_power_off = ep80219_power_off;
69 return 0;
70 }
71 arch_initcall(ep80219_init);
72 #endif
This page took 0.032621 seconds and 6 git commands to generate.