arch/arm/mach-ixp23xx/pci.c

   1 /*
   2  * arch/arm/mach-ixp23xx/pci.c
   3  *
   4  * PCI routines for IXP23XX based systems
   5  *
   6  * Copyright (c) 2005 MontaVista Software, Inc.
   7  *
   8  * based on original code:
   9  *
  10  * Author: Naeem Afzal <naeem.m.afzal@intel.com>
  11  * Copyright 2002-2005 Intel Corp.
  12  *
  13  * This program is free software; you can redistribute it and/or modify it
  14  * under the terms of the GNU General Public License as published by the
  15  * Free Software Foundation; either version 2 of the License, or (at your
  16  * option) any later version.
  17  */
  18
  19 #include <linux/sched.h>
  20 #include <linux/kernel.h>
  21 #include <linux/pci.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/mm.h>
  24 #include <linux/init.h>
  25 #include <linux/ioport.h>
  26 #include <linux/delay.h>
  27 #include <linux/io.h>
  28
  29 #include <asm/irq.h>
  30 #include <asm/sizes.h>
  31 #include <asm/system.h>
  32 #include <asm/mach/pci.h>
  33 #include <mach/hardware.h>
  34
  35 extern int (*external_fault) (unsigned long, struct pt_regs *);
  36
  37 static volatile int pci_master_aborts = 0;
  38
  39 #ifdef DEBUG
  40 #define DBG(x...)       printk(x)
  41 #else
  42 #define DBG(x...)
  43 #endif
  44
  45 int clear_master_aborts(void);
  46
  47 static u32
  48 *ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
  49 {
  50         u32 *paddress;
  51
  52         /*
  53          * Must be dword aligned
  54          */
  55         where &= ~3;
  56
  57         /*
  58          * For top bus, generate type 0, else type 1
  59          */
  60         if (!bus_nr) {
  61                 if (PCI_SLOT(devfn) >= 8)
  62                         return 0;
  63
  64                 paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
  65                                     | (1 << (PCI_SLOT(devfn) + 16))
  66                                     | (PCI_FUNC(devfn) << 8) | where);
  67         } else {
  68                 paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
  69                                     | (bus_nr << 16)
  70                                     | (PCI_SLOT(devfn) << 11)
  71                                     | (PCI_FUNC(devfn) << 8) | where);
  72         }
  73
  74         return paddress;
  75 }
  76
  77 /*
  78  * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
  79  * 0 and 3 are not valid indexes...
  80  */
  81 static u32 bytemask[] = {
  82         /*0*/   0,
  83         /*1*/   0xff,
  84         /*2*/   0xffff,
  85         /*3*/   0,
  86         /*4*/   0xffffffff,
  87 };
  88
  89 static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
  90                                 int where, int size, u32 *value)
  91 {
  92         u32 n;
  93         u32 *addr;
  94
  95         n = where % 4;
  96
  97         DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
  98                 bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
  99
 100         addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
 101         if (!addr)
 102                 return PCIBIOS_DEVICE_NOT_FOUND;
 103
 104         pci_master_aborts = 0;
 105         *value = (*addr >> (8*n)) & bytemask[size];
 106         if (pci_master_aborts) {
 107                         pci_master_aborts = 0;
 108                         *value = 0xffffffff;
 109                         return PCIBIOS_DEVICE_NOT_FOUND;
 110                 }
 111
 112         return PCIBIOS_SUCCESSFUL;
 113 }
 114
 115 /*
 116  * We don't do error checking on the address for writes.
 117  * It's assumed that the user checked for the device existing first
 118  * by doing a read first.
 119  */
 120 static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 121                                         int where, int size, u32 value)
 122 {
 123         u32 mask;
 124         u32 *addr;
 125         u32 temp;
 126
 127         mask = ~(bytemask[size] << ((where % 0x4) * 8));
 128         addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
 129         if (!addr)
 130                 return PCIBIOS_DEVICE_NOT_FOUND;
 131         temp = (u32) (value) << ((where % 0x4) * 8);
 132         *addr = (*addr & mask) | temp;
 133
 134         clear_master_aborts();
 135
 136         return PCIBIOS_SUCCESSFUL;
 137 }
 138
 139 struct pci_ops ixp23xx_pci_ops = {
 140         .read   = ixp23xx_pci_read_config,
 141         .write  = ixp23xx_pci_write_config,
 142 };
 143
 144 struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
 145 {
 146         return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
 147 }
 148
 149 int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 150 {
 151         volatile unsigned long temp;
 152         unsigned long flags;
 153
 154         pci_master_aborts = 1;
 155
 156         local_irq_save(flags);
 157         temp = *IXP23XX_PCI_CONTROL;
 158
 159         /*
 160          * master abort and cmd tgt err
 161          */
 162         if (temp & ((1 << 8) | (1 << 5)))
 163                 *IXP23XX_PCI_CONTROL = temp;
 164
 165         temp = *IXP23XX_PCI_CMDSTAT;
 166
 167         if (temp & (1 << 29))
 168                 *IXP23XX_PCI_CMDSTAT = temp;
 169         local_irq_restore(flags);
 170
 171         /*
 172          * If it was an imprecise abort, then we need to correct the
 173          * return address to be _after_ the instruction.
 174          */
 175         if (fsr & (1 << 10))
 176                 regs->ARM_pc += 4;
 177
 178         return 0;
 179 }
 180
 181 int clear_master_aborts(void)
 182 {
 183         volatile u32 temp;
 184
 185         temp = *IXP23XX_PCI_CONTROL;
 186
 187         /*
 188          * master abort and cmd tgt err
 189          */
 190         if (temp & ((1 << 8) | (1 << 5)))
 191                 *IXP23XX_PCI_CONTROL = temp;
 192
 193         temp = *IXP23XX_PCI_CMDSTAT;
 194
 195         if (temp & (1 << 29))
 196                 *IXP23XX_PCI_CMDSTAT = temp;
 197
 198         return 0;
 199 }
 200
 201 static void __init ixp23xx_pci_common_init(void)
 202 {
 203 #ifdef __ARMEB__
 204         *IXP23XX_PCI_CONTROL |= 0x20000;        /* set I/O swapping */
 205 #endif
 206         /*
 207          * ADDR_31 needs to be clear for PCI memory access to CPP memory
 208          */
 209         *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
 210         *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
 211
 212         /*
 213          * Select correct memory for PCI inbound transactions
 214          */
 215         if (ixp23xx_cpp_boot()) {
 216                 *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
 217         } else {
 218                 *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
 219
 220                 /*
 221                  * Enable coherency on A2 silicon.
 222                  */
 223                 if (arch_is_coherent())
 224                         *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
 225         }
 226 }
 227
 228 void __init ixp23xx_pci_preinit(void)
 229 {
 230         pci_set_flags(0);
 231
 232         ixp23xx_pci_common_init();
 233
 234         hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
 235                         "PCI config cycle to non-existent device");
 236
 237         *IXP23XX_PCI_ADDR_EXT = 0x0000e000;
 238 }
 239
 240 /*
 241  * Prevent PCI layer from seeing the inbound host-bridge resources
 242  */
 243 static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
 244 {
 245         int i;
 246
 247         dev->class &= 0xff;
 248         dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 249         for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 250                 dev->resource[i].start = 0;
 251                 dev->resource[i].end   = 0;
 252                 dev->resource[i].flags = 0;
 253         }
 254 }
 255 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
 256
 257 /*
 258  * IXP2300 systems often have large resource requirements, so we just
 259  * use our own resource space.
 260  */
 261 static struct resource ixp23xx_pci_mem_space = {
 262         .start  = IXP23XX_PCI_MEM_START,
 263         .end    = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
 264         .flags  = IORESOURCE_MEM,
 265         .name   = "PCI Mem Space"
 266 };
 267
 268 static struct resource ixp23xx_pci_io_space = {
 269         .start  = 0x00000100,
 270         .end    = 0x01ffffff,
 271         .flags  = IORESOURCE_IO,
 272         .name   = "PCI I/O Space"
 273 };
 274
 275 int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
 276 {
 277         if (nr >= 1)
 278                 return 0;
 279
 280         sys->resource[0] = &ixp23xx_pci_io_space;
 281         sys->resource[1] = &ixp23xx_pci_mem_space;
 282         sys->resource[2] = NULL;
 283
 284         return 1;
 285 }
 286
 287 void __init ixp23xx_pci_slave_init(void)
 288 {
 289         ixp23xx_pci_common_init();
 290 }