Merge branch 'kirkwood/cleanup' of git://git.infradead.org/users/jcooper/linux into...
[deliverable/linux.git] / arch / arm / mach-kirkwood / pcie.c
1 /*
2 * arch/arm/mach-kirkwood/pcie.c
3 *
4 * PCIe functions for Marvell Kirkwood SoCs
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/pci.h>
13 #include <linux/slab.h>
14 #include <linux/clk.h>
15 #include <video/vga.h>
16 #include <asm/irq.h>
17 #include <asm/mach/pci.h>
18 #include <plat/pcie.h>
19 #include <mach/bridge-regs.h>
20 #include <plat/addr-map.h>
21 #include "common.h"
22
23 static void kirkwood_enable_pcie_clk(const char *port)
24 {
25 struct clk *clk;
26
27 clk = clk_get_sys("pcie", port);
28 if (IS_ERR(clk)) {
29 printk(KERN_ERR "PCIE clock %s missing\n", port);
30 return;
31 }
32 clk_prepare_enable(clk);
33 clk_put(clk);
34 }
35
36 /* This function is called very early in the boot when probing the
37 hardware to determine what we actually are, and what rate tclk is
38 ticking at. Hence calling kirkwood_enable_pcie_clk() is not
39 possible since the clk tree has not been created yet. */
40 void kirkwood_enable_pcie(void)
41 {
42 u32 curr = readl(CLOCK_GATING_CTRL);
43 if (!(curr & CGC_PEX0))
44 writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
45 }
46
47 void kirkwood_pcie_id(u32 *dev, u32 *rev)
48 {
49 kirkwood_enable_pcie();
50 *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
51 *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
52 }
53
54 struct pcie_port {
55 u8 root_bus_nr;
56 void __iomem *base;
57 spinlock_t conf_lock;
58 int irq;
59 struct resource res;
60 };
61
62 static int pcie_port_map[2];
63 static int num_pcie_ports;
64
65 static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
66 {
67 /*
68 * Don't go out when trying to access --
69 * 1. nonexisting device on local bus
70 * 2. where there's no device connected (no link)
71 */
72 if (bus == pp->root_bus_nr && dev == 0)
73 return 1;
74
75 if (!orion_pcie_link_up(pp->base))
76 return 0;
77
78 if (bus == pp->root_bus_nr && dev != 1)
79 return 0;
80
81 return 1;
82 }
83
84
85 /*
86 * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
87 * and then reading the PCIE_CONF_DATA register. Need to make sure these
88 * transactions are atomic.
89 */
90
91 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
92 int size, u32 *val)
93 {
94 struct pci_sys_data *sys = bus->sysdata;
95 struct pcie_port *pp = sys->private_data;
96 unsigned long flags;
97 int ret;
98
99 if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
100 *val = 0xffffffff;
101 return PCIBIOS_DEVICE_NOT_FOUND;
102 }
103
104 spin_lock_irqsave(&pp->conf_lock, flags);
105 ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
106 spin_unlock_irqrestore(&pp->conf_lock, flags);
107
108 return ret;
109 }
110
111 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
112 int where, int size, u32 val)
113 {
114 struct pci_sys_data *sys = bus->sysdata;
115 struct pcie_port *pp = sys->private_data;
116 unsigned long flags;
117 int ret;
118
119 if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
120 return PCIBIOS_DEVICE_NOT_FOUND;
121
122 spin_lock_irqsave(&pp->conf_lock, flags);
123 ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
124 spin_unlock_irqrestore(&pp->conf_lock, flags);
125
126 return ret;
127 }
128
129 static struct pci_ops pcie_ops = {
130 .read = pcie_rd_conf,
131 .write = pcie_wr_conf,
132 };
133
134 static void __init pcie0_ioresources_init(struct pcie_port *pp)
135 {
136 pp->base = (void __iomem *)PCIE_VIRT_BASE;
137 pp->irq = IRQ_KIRKWOOD_PCIE;
138
139 /*
140 * IORESOURCE_MEM
141 */
142 pp->res.name = "PCIe 0 MEM";
143 pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
144 pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
145 pp->res.flags = IORESOURCE_MEM;
146 }
147
148 static void __init pcie1_ioresources_init(struct pcie_port *pp)
149 {
150 pp->base = (void __iomem *)PCIE1_VIRT_BASE;
151 pp->irq = IRQ_KIRKWOOD_PCIE1;
152
153 /*
154 * IORESOURCE_MEM
155 */
156 pp->res.name = "PCIe 1 MEM";
157 pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
158 pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
159 pp->res.flags = IORESOURCE_MEM;
160 }
161
162 static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
163 {
164 struct pcie_port *pp;
165 int index;
166
167 if (nr >= num_pcie_ports)
168 return 0;
169
170 index = pcie_port_map[nr];
171 printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
172
173 pp = kzalloc(sizeof(*pp), GFP_KERNEL);
174 if (!pp)
175 panic("PCIe: failed to allocate pcie_port data");
176 sys->private_data = pp;
177 pp->root_bus_nr = sys->busnr;
178 spin_lock_init(&pp->conf_lock);
179
180 switch (index) {
181 case 0:
182 kirkwood_enable_pcie_clk("0");
183 pcie0_ioresources_init(pp);
184 pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
185 break;
186 case 1:
187 kirkwood_enable_pcie_clk("1");
188 pcie1_ioresources_init(pp);
189 pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
190 break;
191 default:
192 panic("PCIe setup: invalid controller %d", index);
193 }
194
195 if (request_resource(&iomem_resource, &pp->res))
196 panic("Request PCIe%d Memory resource failed\n", index);
197
198 pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
199
200 /*
201 * Generic PCIe unit setup.
202 */
203 orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
204
205 orion_pcie_setup(pp->base);
206
207 return 1;
208 }
209
210 static void __devinit rc_pci_fixup(struct pci_dev *dev)
211 {
212 /*
213 * Prevent enumeration of root complex.
214 */
215 if (dev->bus->parent == NULL && dev->devfn == 0) {
216 int i;
217
218 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
219 dev->resource[i].start = 0;
220 dev->resource[i].end = 0;
221 dev->resource[i].flags = 0;
222 }
223 }
224 }
225 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
226
227 static struct pci_bus __init *
228 kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
229 {
230 struct pci_bus *bus;
231
232 if (nr < num_pcie_ports) {
233 bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
234 &sys->resources);
235 } else {
236 bus = NULL;
237 BUG();
238 }
239
240 return bus;
241 }
242
243 static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
244 u8 pin)
245 {
246 struct pci_sys_data *sys = dev->sysdata;
247 struct pcie_port *pp = sys->private_data;
248
249 return pp->irq;
250 }
251
252 static struct hw_pci kirkwood_pci __initdata = {
253 .setup = kirkwood_pcie_setup,
254 .scan = kirkwood_pcie_scan_bus,
255 .map_irq = kirkwood_pcie_map_irq,
256 };
257
258 static void __init add_pcie_port(int index, unsigned long base)
259 {
260 printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
261
262 if (orion_pcie_link_up((void __iomem *)base)) {
263 printk(KERN_INFO "link up\n");
264 pcie_port_map[num_pcie_ports++] = index;
265 } else
266 printk(KERN_INFO "link down, ignoring\n");
267 }
268
269 void __init kirkwood_pcie_init(unsigned int portmask)
270 {
271 vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
272
273 if (portmask & KW_PCIE0)
274 add_pcie_port(0, PCIE_VIRT_BASE);
275
276 if (portmask & KW_PCIE1)
277 add_pcie_port(1, PCIE1_VIRT_BASE);
278
279 kirkwood_pci.nr_controllers = num_pcie_ports;
280 pci_common_init(&kirkwood_pci);
281 }
This page took 0.03726 seconds and 5 git commands to generate.