[ARM] Kirkwood: merge net2big_v2 and net5big_v2 board setups
[deliverable/linux.git] / arch / arm / mach-mmp / aspenite.c
1 /*
2 * linux/arch/arm/mach-mmp/aspenite.c
3 *
4 * Support for the Marvell PXA168-based Aspenite and Zylonite2
5 * Development Platform.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * publishhed by the Free Software Foundation.
10 */
11
12 #include <linux/init.h>
13 #include <linux/kernel.h>
14 #include <linux/platform_device.h>
15 #include <linux/smc91x.h>
16 #include <linux/mtd/mtd.h>
17 #include <linux/mtd/partitions.h>
18 #include <linux/mtd/nand.h>
19
20 #include <asm/mach-types.h>
21 #include <asm/mach/arch.h>
22 #include <mach/addr-map.h>
23 #include <mach/mfp-pxa168.h>
24 #include <mach/pxa168.h>
25 #include <mach/gpio.h>
26
27 #include "common.h"
28
29 static unsigned long common_pin_config[] __initdata = {
30 /* Data Flash Interface */
31 GPIO0_DFI_D15,
32 GPIO1_DFI_D14,
33 GPIO2_DFI_D13,
34 GPIO3_DFI_D12,
35 GPIO4_DFI_D11,
36 GPIO5_DFI_D10,
37 GPIO6_DFI_D9,
38 GPIO7_DFI_D8,
39 GPIO8_DFI_D7,
40 GPIO9_DFI_D6,
41 GPIO10_DFI_D5,
42 GPIO11_DFI_D4,
43 GPIO12_DFI_D3,
44 GPIO13_DFI_D2,
45 GPIO14_DFI_D1,
46 GPIO15_DFI_D0,
47
48 /* Static Memory Controller */
49 GPIO18_SMC_nCS0,
50 GPIO34_SMC_nCS1,
51 GPIO23_SMC_nLUA,
52 GPIO25_SMC_nLLA,
53 GPIO28_SMC_RDY,
54 GPIO29_SMC_SCLK,
55 GPIO35_SMC_BE1,
56 GPIO36_SMC_BE2,
57 GPIO27_GPIO, /* Ethernet IRQ */
58
59 /* UART1 */
60 GPIO107_UART1_RXD,
61 GPIO108_UART1_TXD,
62 };
63
64 static struct smc91x_platdata smc91x_info = {
65 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
66 };
67
68 static struct resource smc91x_resources[] = {
69 [0] = {
70 .start = SMC_CS1_PHYS_BASE + 0x300,
71 .end = SMC_CS1_PHYS_BASE + 0xfffff,
72 .flags = IORESOURCE_MEM,
73 },
74 [1] = {
75 .start = gpio_to_irq(27),
76 .end = gpio_to_irq(27),
77 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
78 }
79 };
80
81 static struct platform_device smc91x_device = {
82 .name = "smc91x",
83 .id = 0,
84 .dev = {
85 .platform_data = &smc91x_info,
86 },
87 .num_resources = ARRAY_SIZE(smc91x_resources),
88 .resource = smc91x_resources,
89 };
90
91 static struct mtd_partition aspenite_nand_partitions[] = {
92 {
93 .name = "bootloader",
94 .offset = 0,
95 .size = SZ_1M,
96 .mask_flags = MTD_WRITEABLE,
97 }, {
98 .name = "reserved",
99 .offset = MTDPART_OFS_APPEND,
100 .size = SZ_128K,
101 .mask_flags = MTD_WRITEABLE,
102 }, {
103 .name = "reserved",
104 .offset = MTDPART_OFS_APPEND,
105 .size = SZ_8M,
106 .mask_flags = MTD_WRITEABLE,
107 }, {
108 .name = "kernel",
109 .offset = MTDPART_OFS_APPEND,
110 .size = (SZ_2M + SZ_1M),
111 .mask_flags = 0,
112 }, {
113 .name = "filesystem",
114 .offset = MTDPART_OFS_APPEND,
115 .size = SZ_48M,
116 .mask_flags = 0,
117 }
118 };
119
120 static struct pxa3xx_nand_platform_data aspenite_nand_info = {
121 .enable_arbiter = 1,
122 .parts = aspenite_nand_partitions,
123 .nr_parts = ARRAY_SIZE(aspenite_nand_partitions),
124 };
125
126 static void __init common_init(void)
127 {
128 mfp_config(ARRAY_AND_SIZE(common_pin_config));
129
130 /* on-chip devices */
131 pxa168_add_uart(1);
132 pxa168_add_nand(&aspenite_nand_info);
133
134 /* off-chip devices */
135 platform_device_register(&smc91x_device);
136 }
137
138 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
139 .phys_io = APB_PHYS_BASE,
140 .boot_params = 0x00000100,
141 .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
142 .map_io = pxa_map_io,
143 .init_irq = pxa168_init_irq,
144 .timer = &pxa168_timer,
145 .init_machine = common_init,
146 MACHINE_END
147
148 MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
149 .phys_io = APB_PHYS_BASE,
150 .boot_params = 0x00000100,
151 .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
152 .map_io = pxa_map_io,
153 .init_irq = pxa168_init_irq,
154 .timer = &pxa168_timer,
155 .init_machine = common_init,
156 MACHINE_END
This page took 0.033445 seconds and 5 git commands to generate.