Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
[deliverable/linux.git] / arch / arm / mach-msm / board-msm7x30.c
1 /* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
2 *
3 * This program is free software; you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License version 2 and
5 * only version 2 as published by the Free Software Foundation.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
15 * 02110-1301, USA.
16 */
17 #include <linux/gpio.h>
18 #include <linux/kernel.h>
19 #include <linux/irq.h>
20 #include <linux/platform_device.h>
21 #include <linux/delay.h>
22 #include <linux/io.h>
23 #include <linux/smsc911x.h>
24 #include <linux/usb/msm_hsusb.h>
25 #include <linux/clkdev.h>
26 #include <linux/memblock.h>
27
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30 #include <asm/memory.h>
31 #include <asm/setup.h>
32
33 #include <mach/board.h>
34 #include <mach/msm_iomap.h>
35 #include <mach/dma.h>
36
37 #include <mach/vreg.h>
38 #include "devices.h"
39 #include "gpiomux.h"
40 #include "proc_comm.h"
41 #include "common.h"
42
43 static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
44 struct meminfo *mi)
45 {
46 for (; tag->hdr.size; tag = tag_next(tag))
47 if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
48 tag->u.mem.start = 0;
49 tag->u.mem.size += SZ_2M;
50 }
51 }
52
53 static void __init msm7x30_reserve(void)
54 {
55 memblock_remove(0x0, SZ_2M);
56 }
57
58 static int hsusb_phy_init_seq[] = {
59 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
60 0x02, 0x36, /* Disable CDR Auto Reset feature */
61 -1
62 };
63
64 static struct msm_otg_platform_data msm_otg_pdata = {
65 .phy_init_seq = hsusb_phy_init_seq,
66 .mode = USB_PERIPHERAL,
67 .otg_control = OTG_PHY_CONTROL,
68 };
69
70 struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
71 #ifdef CONFIG_SERIAL_MSM_CONSOLE
72 [49] = { /* UART2 RFR */
73 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
74 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
75 },
76 [50] = { /* UART2 CTS */
77 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
78 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
79 },
80 [51] = { /* UART2 RX */
81 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
82 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
83 },
84 [52] = { /* UART2 TX */
85 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
86 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
87 },
88 #endif
89 };
90
91 static struct platform_device *devices[] __initdata = {
92 &msm_clock_7x30,
93 &msm_device_gpio_7x30,
94 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
95 &msm_device_uart2,
96 #endif
97 &msm_device_smd,
98 &msm_device_otg,
99 &msm_device_hsusb,
100 &msm_device_hsusb_host,
101 };
102
103 static void __init msm7x30_init_irq(void)
104 {
105 msm_init_irq();
106 }
107
108 static void __init msm7x30_init(void)
109 {
110 msm_device_otg.dev.platform_data = &msm_otg_pdata;
111 msm_device_hsusb.dev.parent = &msm_device_otg.dev;
112 msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
113
114 platform_add_devices(devices, ARRAY_SIZE(devices));
115 }
116
117 static void __init msm7x30_map_io(void)
118 {
119 msm_map_msm7x30_io();
120 }
121
122 static void __init msm7x30_init_late(void)
123 {
124 smd_debugfs_init();
125 }
126
127 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
128 .atag_offset = 0x100,
129 .fixup = msm7x30_fixup,
130 .reserve = msm7x30_reserve,
131 .map_io = msm7x30_map_io,
132 .init_irq = msm7x30_init_irq,
133 .init_machine = msm7x30_init,
134 .init_late = msm7x30_init_late,
135 .init_time = msm7x30_timer_init,
136 MACHINE_END
137
138 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
139 .atag_offset = 0x100,
140 .fixup = msm7x30_fixup,
141 .reserve = msm7x30_reserve,
142 .map_io = msm7x30_map_io,
143 .init_irq = msm7x30_init_irq,
144 .init_machine = msm7x30_init,
145 .init_late = msm7x30_init_late,
146 .init_time = msm7x30_timer_init,
147 MACHINE_END
148
149 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
150 .atag_offset = 0x100,
151 .fixup = msm7x30_fixup,
152 .reserve = msm7x30_reserve,
153 .map_io = msm7x30_map_io,
154 .init_irq = msm7x30_init_irq,
155 .init_machine = msm7x30_init,
156 .init_late = msm7x30_init_late,
157 .init_time = msm7x30_timer_init,
158 MACHINE_END
This page took 0.049513 seconds and 5 git commands to generate.