ARM i.MX ehci: do ehci init in board specific functions
[deliverable/linux.git] / arch / arm / mach-mx3 / mach-mx35_3ds.c
1 /*
2 * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
3 * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
4 *
5 * Author: Fabio Estevam <fabio.estevam@freescale.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 */
17
18 /*
19 * This machine is known as:
20 * - i.MX35 3-Stack Development System
21 * - i.MX35 Platform Development Kit (i.MX35 PDK)
22 */
23
24 #include <linux/types.h>
25 #include <linux/init.h>
26 #include <linux/platform_device.h>
27 #include <linux/memory.h>
28 #include <linux/gpio.h>
29 #include <linux/usb/otg.h>
30
31 #include <linux/mtd/physmap.h>
32
33 #include <asm/mach-types.h>
34 #include <asm/mach/arch.h>
35 #include <asm/mach/time.h>
36 #include <asm/mach/map.h>
37
38 #include <mach/hardware.h>
39 #include <mach/common.h>
40 #include <mach/iomux-mx35.h>
41 #include <mach/irqs.h>
42 #include <mach/3ds_debugboard.h>
43
44 #include "devices-imx35.h"
45 #include "devices.h"
46
47 #define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
48
49 static const struct imxuart_platform_data uart_pdata __initconst = {
50 .flags = IMXUART_HAVE_RTSCTS,
51 };
52
53 static struct physmap_flash_data mx35pdk_flash_data = {
54 .width = 2,
55 };
56
57 static struct resource mx35pdk_flash_resource = {
58 .start = MX35_CS0_BASE_ADDR,
59 .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
60 .flags = IORESOURCE_MEM,
61 };
62
63 static struct platform_device mx35pdk_flash = {
64 .name = "physmap-flash",
65 .id = 0,
66 .dev = {
67 .platform_data = &mx35pdk_flash_data,
68 },
69 .resource = &mx35pdk_flash_resource,
70 .num_resources = 1,
71 };
72
73 static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
74 .width = 1,
75 .hw_ecc = 1,
76 .flash_bbt = 1,
77 };
78
79 static struct platform_device *devices[] __initdata = {
80 &mx35pdk_flash,
81 };
82
83 static iomux_v3_cfg_t mx35pdk_pads[] = {
84 /* UART1 */
85 MX35_PAD_CTS1__UART1_CTS,
86 MX35_PAD_RTS1__UART1_RTS,
87 MX35_PAD_TXD1__UART1_TXD_MUX,
88 MX35_PAD_RXD1__UART1_RXD_MUX,
89 /* FEC */
90 MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
91 MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
92 MX35_PAD_FEC_RX_DV__FEC_RX_DV,
93 MX35_PAD_FEC_COL__FEC_COL,
94 MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
95 MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
96 MX35_PAD_FEC_TX_EN__FEC_TX_EN,
97 MX35_PAD_FEC_MDC__FEC_MDC,
98 MX35_PAD_FEC_MDIO__FEC_MDIO,
99 MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
100 MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
101 MX35_PAD_FEC_CRS__FEC_CRS,
102 MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
103 MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
104 MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
105 MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
106 MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
107 MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
108 /* USBOTG */
109 MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
110 MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
111 /* USBH1 */
112 MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
113 MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
114 /* SDCARD */
115 MX35_PAD_SD1_CMD__ESDHC1_CMD,
116 MX35_PAD_SD1_CLK__ESDHC1_CLK,
117 MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
118 MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
119 MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
120 MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
121 };
122
123 static int mx35_3ds_otg_init(struct platform_device *pdev)
124 {
125 return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
126 }
127
128 /* OTG config */
129 static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
130 .operating_mode = FSL_USB2_DR_DEVICE,
131 .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
132 };
133
134 static struct mxc_usbh_platform_data otg_pdata __initdata = {
135 .init = mx35_3ds_otg_init,
136 .portsc = MXC_EHCI_MODE_UTMI,
137 };
138
139 static int mx35_3ds_usbh_init(struct platform_device *pdev)
140 {
141 return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
142 MXC_EHCI_INTERNAL_PHY);
143 }
144
145 /* USB HOST config */
146 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
147 .init = mx35_3ds_usbh_init,
148 .portsc = MXC_EHCI_MODE_SERIAL,
149 };
150
151 static int otg_mode_host;
152
153 static int __init mx35_3ds_otg_mode(char *options)
154 {
155 if (!strcmp(options, "host"))
156 otg_mode_host = 1;
157 else if (!strcmp(options, "device"))
158 otg_mode_host = 0;
159 else
160 pr_info("otg_mode neither \"host\" nor \"device\". "
161 "Defaulting to device\n");
162 return 0;
163 }
164 __setup("otg_mode=", mx35_3ds_otg_mode);
165
166 /*
167 * Board specific initialization.
168 */
169 static void __init mxc_board_init(void)
170 {
171 mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
172
173 imx35_add_fec(NULL);
174 imx35_add_imx2_wdt(NULL);
175 platform_add_devices(devices, ARRAY_SIZE(devices));
176
177 imx35_add_imx_uart0(&uart_pdata);
178
179 if (otg_mode_host)
180 imx35_add_mxc_ehci_otg(&otg_pdata);
181
182 imx35_add_mxc_ehci_hs(&usb_host_pdata);
183
184 if (!otg_mode_host)
185 imx35_add_fsl_usb2_udc(&usb_otg_pdata);
186
187 imx35_add_mxc_nand(&mx35pdk_nand_board_info);
188 imx35_add_sdhci_esdhc_imx(0, NULL);
189
190 if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
191 pr_warn("Init of the debugboard failed, all "
192 "devices on the debugboard are unusable.\n");
193 }
194
195 static void __init mx35pdk_timer_init(void)
196 {
197 mx35_clocks_init();
198 }
199
200 struct sys_timer mx35pdk_timer = {
201 .init = mx35pdk_timer_init,
202 };
203
204 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
205 /* Maintainer: Freescale Semiconductor, Inc */
206 .boot_params = MX3x_PHYS_OFFSET + 0x100,
207 .map_io = mx35_map_io,
208 .init_early = imx35_init_early,
209 .init_irq = mx35_init_irq,
210 .timer = &mx35pdk_timer,
211 .init_machine = mxc_board_init,
212 MACHINE_END
This page took 0.061371 seconds and 5 git commands to generate.