2 * LILLY-1131 development board support
4 * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
6 * based on code for other MX31 boards,
8 * Copyright 2005-2007 Freescale Semiconductor
9 * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
10 * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
27 #include <linux/kernel.h>
28 #include <linux/types.h>
29 #include <linux/init.h>
30 #include <linux/gpio.h>
31 #include <linux/platform_device.h>
32 #include <linux/spi/spi.h>
33 #include <linux/mfd/mc13783.h>
35 #include <asm/mach-types.h>
36 #include <asm/mach/arch.h>
37 #include <asm/mach/map.h>
39 #include <mach/hardware.h>
40 #include <mach/common.h>
41 #include <mach/imx-uart.h>
42 #include <mach/iomux-mx3.h>
43 #include <mach/board-mx31lilly.h>
45 #include <mach/mx3fb.h>
51 * This file contains board-specific initialization routines for the
52 * LILLY-1131 development board. If you design an own baseboard for the
53 * module, use this file as base for support code.
56 static unsigned int lilly_db_board_pins
[] __initdata
= {
65 MX31_PIN_CSPI3_MOSI__RXD3
,
66 MX31_PIN_CSPI3_MISO__TXD3
,
67 MX31_PIN_CSPI3_SCLK__RTS3
,
68 MX31_PIN_CSPI3_SPI_RDY__CTS3
,
69 MX31_PIN_SD1_DATA3__SD1_DATA3
,
70 MX31_PIN_SD1_DATA2__SD1_DATA2
,
71 MX31_PIN_SD1_DATA1__SD1_DATA1
,
72 MX31_PIN_SD1_DATA0__SD1_DATA0
,
73 MX31_PIN_SD1_CLK__SD1_CLK
,
74 MX31_PIN_SD1_CMD__SD1_CMD
,
93 MX31_PIN_VSYNC3__VSYNC3
,
94 MX31_PIN_HSYNC__HSYNC
,
95 MX31_PIN_FPSHIFT__FPSHIFT
,
96 MX31_PIN_DRDY0__DRDY0
,
97 MX31_PIN_CONTRAST__CONTRAST
,
101 static struct imxuart_platform_data uart_pdata __initdata
= {
102 .flags
= IMXUART_HAVE_RTSCTS
,
107 static int mxc_mmc1_get_ro(struct device
*dev
)
109 return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0
));
112 static int gpio_det
, gpio_wp
;
114 static int mxc_mmc1_init(struct device
*dev
,
115 irq_handler_t detect_irq
, void *data
)
119 gpio_det
= IOMUX_TO_GPIO(MX31_PIN_GPIO1_1
);
120 gpio_wp
= IOMUX_TO_GPIO(MX31_PIN_LCS0
);
122 ret
= gpio_request(gpio_det
, "MMC detect");
126 ret
= gpio_request(gpio_wp
, "MMC w/p");
130 gpio_direction_input(gpio_det
);
131 gpio_direction_input(gpio_wp
);
133 ret
= request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1
), detect_irq
,
134 IRQF_DISABLED
| IRQF_TRIGGER_FALLING
,
150 static void mxc_mmc1_exit(struct device
*dev
, void *data
)
154 free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1
), data
);
157 static struct imxmmc_platform_data mmc_pdata
= {
158 .get_ro
= mxc_mmc1_get_ro
,
159 .init
= mxc_mmc1_init
,
160 .exit
= mxc_mmc1_exit
,
163 /* Framebuffer support */
164 static struct ipu_platform_data ipu_data __initdata
= {
165 .irq_base
= MXC_IPU_IRQ_START
,
168 static const struct fb_videomode fb_modedb
= {
169 /* 640x480 TFT panel (IPS-056T) */
181 .sync
= FB_SYNC_VERT_HIGH_ACT
| FB_SYNC_OE_ACT_HIGH
,
182 .vmode
= FB_VMODE_NONINTERLACED
,
186 static struct mx3fb_platform_data fb_pdata __initdata
= {
187 .dma_dev
= &mx3_ipu
.dev
,
193 #define LCD_VCC_EN_GPIO (7)
195 static void __init
mx31lilly_init_fb(void)
197 if (gpio_request(LCD_VCC_EN_GPIO
, "LCD enable") != 0) {
198 printk(KERN_WARNING
"unable to request LCD_VCC_EN pin.\n");
202 mxc_register_device(&mx3_ipu
, &ipu_data
);
203 mxc_register_device(&mx3_fb
, &fb_pdata
);
204 gpio_direction_output(LCD_VCC_EN_GPIO
, 1);
209 static struct mc13783_platform_data mc13783_pdata __initdata
= {
210 .flags
= MC13783_USE_RTC
| MC13783_USE_TOUCHSCREEN
,
213 static struct spi_board_info lilly_spi_devs
[] __initdata
= {
215 .modalias
= "mc13783",
216 .max_speed_hz
= 1000000,
219 .platform_data
= &mc13783_pdata
,
223 void __init
mx31lilly_db_init(void)
225 mxc_iomux_setup_multiple_pins(lilly_db_board_pins
,
226 ARRAY_SIZE(lilly_db_board_pins
),
227 "development board pins");
228 mxc_register_device(&mxc_uart_device0
, &uart_pdata
);
229 mxc_register_device(&mxc_uart_device1
, &uart_pdata
);
230 mxc_register_device(&mxc_uart_device2
, &uart_pdata
);
231 mxc_register_device(&mxcsdhc_device0
, &mmc_pdata
);
233 spi_register_board_info(lilly_spi_devs
, ARRAY_SIZE(lilly_spi_devs
));