arch/arm/mach-omap1/board-generic.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-generic.c
   3  *
   4  * Modified from board-innovator1510.c
   5  *
   6  * Code for generic OMAP board. Should work on many OMAP systems where
   7  * the device drivers take care of all the necessary hardware initialization.
   8  * Do not put any board specific code to this file; create a new machine
   9  * type if you need custom low-level initializations.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15 #include <linux/gpio.h>
  16 #include <linux/kernel.h>
  17 #include <linux/init.h>
  18 #include <linux/platform_device.h>
  19
  20 #include <mach/hardware.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/mach/arch.h>
  23 #include <asm/mach/map.h>
  24
  25 #include <mach/mux.h>
  26
  27 #include <mach/usb.h>
  28
  29 #include "common.h"
  30
  31 /* assume no Mini-AB port */
  32
  33 #ifdef CONFIG_ARCH_OMAP15XX
  34 static struct omap_usb_config generic1510_usb_config __initdata = {
  35         .register_host  = 1,
  36         .register_dev   = 1,
  37         .hmc_mode       = 16,
  38         .pins[0]        = 3,
  39 };
  40 #endif
  41
  42 #if defined(CONFIG_ARCH_OMAP16XX)
  43 static struct omap_usb_config generic1610_usb_config __initdata = {
  44 #ifdef CONFIG_USB_OTG
  45         .otg            = 1,
  46 #endif
  47         .register_host  = 1,
  48         .register_dev   = 1,
  49         .hmc_mode       = 16,
  50         .pins[0]        = 6,
  51 };
  52 #endif
  53
  54 static void __init omap_generic_init(void)
  55 {
  56 #ifdef CONFIG_ARCH_OMAP15XX
  57         if (cpu_is_omap15xx()) {
  58                 /* mux pins for uarts */
  59                 omap_cfg_reg(UART1_TX);
  60                 omap_cfg_reg(UART1_RTS);
  61                 omap_cfg_reg(UART2_TX);
  62                 omap_cfg_reg(UART2_RTS);
  63                 omap_cfg_reg(UART3_TX);
  64                 omap_cfg_reg(UART3_RX);
  65
  66                 omap1_usb_init(&generic1510_usb_config);
  67         }
  68 #endif
  69 #if defined(CONFIG_ARCH_OMAP16XX)
  70         if (!cpu_is_omap1510()) {
  71                 omap1_usb_init(&generic1610_usb_config);
  72         }
  73 #endif
  74
  75         omap_serial_init();
  76         omap_register_i2c_bus(1, 100, NULL, 0);
  77 }
  78
  79 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
  80         /* Maintainer: Tony Lindgren <tony@atomide.com> */
  81         .atag_offset    = 0x100,
  82         .map_io         = omap16xx_map_io,
  83         .init_early     = omap1_init_early,
  84         .init_irq       = omap1_init_irq,
  85         .handle_irq     = omap1_handle_irq,
  86         .init_machine   = omap_generic_init,
  87         .init_late      = omap1_init_late,
  88         .init_time      = omap1_timer_init,
  89         .restart        = omap1_restart,
  90 MACHINE_END