arch/arm/mach-omap2/Kconfig

   1 config ARCH_OMAP
   2         bool
   3
   4 config ARCH_OMAP2PLUS
   5         bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
   6         select ARCH_HAS_CPUFREQ
   7         select ARCH_HAS_HOLES_MEMORYMODEL
   8         select ARCH_OMAP
   9         select ARCH_REQUIRE_GPIOLIB
  10         select CLKDEV_LOOKUP
  11         select CLKSRC_MMIO
  12         select GENERIC_CLOCKEVENTS
  13         select GENERIC_IRQ_CHIP
  14         select HAVE_CLK
  15         select OMAP_DM_TIMER
  16         select PINCTRL
  17         select PROC_DEVICETREE if PROC_FS
  18         select SPARSE_IRQ
  19         select USE_OF
  20         help
  21           Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
  22
  23
  24 if ARCH_OMAP2PLUS
  25
  26 menu "TI OMAP2/3/4 Specific Features"
  27
  28 config ARCH_OMAP2PLUS_TYPICAL
  29         bool "Typical OMAP configuration"
  30         default y
  31         select AEABI
  32         select HIGHMEM
  33         select I2C
  34         select I2C_OMAP
  35         select MENELAUS if ARCH_OMAP2
  36         select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
  37         select PM_RUNTIME
  38         select REGULATOR
  39         select SERIAL_OMAP
  40         select SERIAL_OMAP_CONSOLE
  41         select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
  42         select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
  43         select VFP
  44         help
  45           Compile a kernel suitable for booting most boards
  46
  47 config SOC_HAS_OMAP2_SDRC
  48         bool "OMAP2 SDRAM Controller support"
  49
  50 config SOC_HAS_REALTIME_COUNTER
  51         bool "Real time free running counter"
  52         depends on SOC_OMAP5
  53         default y
  54
  55 config ARCH_OMAP2
  56         bool "TI OMAP2"
  57         depends on ARCH_OMAP2PLUS
  58         default y
  59         select CPU_V6
  60         select MULTI_IRQ_HANDLER
  61         select SOC_HAS_OMAP2_SDRC
  62         select COMMON_CLK
  63
  64 config ARCH_OMAP3
  65         bool "TI OMAP3"
  66         depends on ARCH_OMAP2PLUS
  67         default y
  68         select ARCH_HAS_OPP
  69         select ARM_CPU_SUSPEND if PM
  70         select CPU_V7
  71         select MULTI_IRQ_HANDLER
  72         select OMAP_INTERCONNECT
  73         select PM_OPP if PM
  74         select PM_RUNTIME if CPU_IDLE
  75         select SOC_HAS_OMAP2_SDRC
  76         select COMMON_CLK
  77         select USB_ARCH_HAS_EHCI if USB_SUPPORT
  78
  79 config ARCH_OMAP4
  80         bool "TI OMAP4"
  81         default y
  82         depends on ARCH_OMAP2PLUS
  83         select ARCH_HAS_OPP
  84         select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
  85         select ARM_CPU_SUSPEND if PM
  86         select ARM_ERRATA_720789
  87         select ARM_GIC
  88         select CACHE_L2X0
  89         select CPU_V7
  90         select HAVE_SMP
  91         select LOCAL_TIMERS if SMP
  92         select OMAP_INTERCONNECT
  93         select PL310_ERRATA_588369
  94         select PL310_ERRATA_727915
  95         select PM_OPP if PM
  96         select PM_RUNTIME if CPU_IDLE
  97         select USB_ARCH_HAS_EHCI if USB_SUPPORT
  98         select COMMON_CLK
  99
 100 config SOC_OMAP5
 101         bool "TI OMAP5"
 102         select ARM_CPU_SUSPEND if PM
 103         select ARM_GIC
 104         select CPU_V7
 105         select HAVE_SMP
 106         select COMMON_CLK
 107         select HAVE_ARM_ARCH_TIMER
 108
 109 comment "OMAP Core Type"
 110         depends on ARCH_OMAP2
 111
 112 config SOC_OMAP2420
 113         bool "OMAP2420 support"
 114         depends on ARCH_OMAP2
 115         default y
 116         select OMAP_DM_TIMER
 117         select SOC_HAS_OMAP2_SDRC
 118
 119 config SOC_OMAP2430
 120         bool "OMAP2430 support"
 121         depends on ARCH_OMAP2
 122         default y
 123         select SOC_HAS_OMAP2_SDRC
 124
 125 config SOC_OMAP3430
 126         bool "OMAP3430 support"
 127         depends on ARCH_OMAP3
 128         default y
 129         select SOC_HAS_OMAP2_SDRC
 130
 131 config SOC_TI81XX
 132         bool "TI81XX support"
 133         depends on ARCH_OMAP3
 134         default y
 135
 136 config SOC_AM33XX
 137         bool "AM33XX support"
 138         default y
 139         select ARM_CPU_SUSPEND if PM
 140         select CPU_V7
 141         select MULTI_IRQ_HANDLER
 142         select COMMON_CLK
 143
 144 config OMAP_PACKAGE_ZAF
 145        bool
 146
 147 config OMAP_PACKAGE_ZAC
 148        bool
 149
 150 config OMAP_PACKAGE_CBC
 151        bool
 152
 153 config OMAP_PACKAGE_CBB
 154        bool
 155
 156 config OMAP_PACKAGE_CUS
 157        bool
 158
 159 config OMAP_PACKAGE_CBP
 160        bool
 161
 162 config OMAP_PACKAGE_CBL
 163        bool
 164
 165 config OMAP_PACKAGE_CBS
 166        bool
 167
 168 comment "OMAP Board Type"
 169         depends on ARCH_OMAP2PLUS
 170
 171 config MACH_OMAP_GENERIC
 172         bool "Generic OMAP2+ board"
 173         depends on ARCH_OMAP2PLUS
 174         default y
 175         help
 176           Support for generic TI OMAP2+ boards using Flattened Device Tree.
 177           More information at Documentation/devicetree
 178
 179 config MACH_OMAP2_TUSB6010
 180         bool
 181         depends on ARCH_OMAP2 && SOC_OMAP2420
 182         default y if MACH_NOKIA_N8X0
 183
 184 config MACH_OMAP_H4
 185         bool "OMAP 2420 H4 board"
 186         depends on SOC_OMAP2420
 187         default y
 188         select OMAP_DEBUG_DEVICES
 189         select OMAP_PACKAGE_ZAF
 190
 191 config MACH_OMAP_2430SDP
 192         bool "OMAP 2430 SDP board"
 193         depends on SOC_OMAP2430
 194         default y
 195         select OMAP_PACKAGE_ZAC
 196
 197 config MACH_OMAP3_BEAGLE
 198         bool "OMAP3 BEAGLE board"
 199         depends on ARCH_OMAP3
 200         default y
 201         select OMAP_PACKAGE_CBB
 202
 203 config MACH_DEVKIT8000
 204         bool "DEVKIT8000 board"
 205         depends on ARCH_OMAP3
 206         default y
 207         select OMAP_PACKAGE_CUS
 208
 209 config MACH_OMAP_LDP
 210         bool "OMAP3 LDP board"
 211         depends on ARCH_OMAP3
 212         default y
 213         select OMAP_PACKAGE_CBB
 214
 215 config MACH_OMAP3530_LV_SOM
 216         bool "OMAP3 Logic 3530 LV SOM board"
 217         depends on ARCH_OMAP3
 218         default y
 219         select OMAP_PACKAGE_CBB
 220         help
 221          Support for the LogicPD OMAP3530 SOM Development kit
 222          for full description please see the products webpage at
 223          http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
 224
 225 config MACH_OMAP3_TORPEDO
 226         bool "OMAP3 Logic 35x Torpedo board"
 227         depends on ARCH_OMAP3
 228         default y
 229         select OMAP_PACKAGE_CBB
 230         help
 231          Support for the LogicPD OMAP35x Torpedo Development kit
 232          for full description please see the products webpage at
 233          http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
 234
 235 config MACH_OVERO
 236         bool "Gumstix Overo board"
 237         depends on ARCH_OMAP3
 238         default y
 239         select OMAP_PACKAGE_CBB
 240
 241 config MACH_OMAP3EVM
 242         bool "OMAP 3530 EVM board"
 243         depends on ARCH_OMAP3
 244         default y
 245         select OMAP_PACKAGE_CBB
 246
 247 config MACH_OMAP3517EVM
 248         bool "OMAP3517/ AM3517 EVM board"
 249         depends on ARCH_OMAP3
 250         default y
 251         select OMAP_PACKAGE_CBB
 252
 253 config MACH_CRANEBOARD
 254         bool "AM3517/05 CRANE board"
 255         depends on ARCH_OMAP3
 256         select OMAP_PACKAGE_CBB
 257
 258 config MACH_OMAP3_PANDORA
 259         bool "OMAP3 Pandora"
 260         depends on ARCH_OMAP3
 261         default y
 262         select OMAP_PACKAGE_CBB
 263         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 264
 265 config MACH_TOUCHBOOK
 266         bool "OMAP3 Touch Book"
 267         depends on ARCH_OMAP3
 268         default y
 269         select OMAP_PACKAGE_CBB
 270
 271 config MACH_OMAP_3430SDP
 272         bool "OMAP 3430 SDP board"
 273         depends on ARCH_OMAP3
 274         default y
 275         select OMAP_PACKAGE_CBB
 276
 277 config MACH_NOKIA_N800
 278        bool
 279
 280 config MACH_NOKIA_N810
 281        bool
 282
 283 config MACH_NOKIA_N810_WIMAX
 284        bool
 285
 286 config MACH_NOKIA_N8X0
 287         bool "Nokia N800/N810"
 288         depends on SOC_OMAP2420
 289         default y
 290         select MACH_NOKIA_N800
 291         select MACH_NOKIA_N810
 292         select MACH_NOKIA_N810_WIMAX
 293         select OMAP_PACKAGE_ZAC
 294
 295 config MACH_NOKIA_RM680
 296         bool "Nokia N950 (RM-680) / N9 (RM-696) phones"
 297         depends on ARCH_OMAP3
 298         default y
 299         select MACH_NOKIA_RM696
 300         select OMAP_PACKAGE_CBB
 301
 302 config MACH_NOKIA_RX51
 303         bool "Nokia N900 (RX-51) phone"
 304         depends on ARCH_OMAP3
 305         default y
 306         select OMAP_PACKAGE_CBB
 307
 308 config MACH_OMAP_ZOOM2
 309         bool "OMAP3 Zoom2 board"
 310         depends on ARCH_OMAP3
 311         default y
 312         select OMAP_PACKAGE_CBB
 313         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 314         select SERIAL_8250
 315         select SERIAL_8250_CONSOLE
 316         select SERIAL_CORE_CONSOLE
 317
 318 config MACH_OMAP_ZOOM3
 319         bool "OMAP3630 Zoom3 board"
 320         depends on ARCH_OMAP3
 321         default y
 322         select OMAP_PACKAGE_CBP
 323         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 324         select SERIAL_8250
 325         select SERIAL_8250_CONSOLE
 326         select SERIAL_CORE_CONSOLE
 327
 328 config MACH_CM_T35
 329         bool "CompuLab CM-T35/CM-T3730 modules"
 330         depends on ARCH_OMAP3
 331         default y
 332         select MACH_CM_T3730
 333         select OMAP_PACKAGE_CUS
 334
 335 config MACH_CM_T3517
 336         bool "CompuLab CM-T3517 module"
 337         depends on ARCH_OMAP3
 338         default y
 339         select OMAP_PACKAGE_CBB
 340
 341 config MACH_CM_T3730
 342        bool
 343
 344 config MACH_IGEP0020
 345         bool "IGEP v2 board"
 346         depends on ARCH_OMAP3
 347         default y
 348         select OMAP_PACKAGE_CBB
 349
 350 config MACH_IGEP0030
 351         bool "IGEP OMAP3 module"
 352         depends on ARCH_OMAP3
 353         default y
 354         select MACH_IGEP0020
 355         select OMAP_PACKAGE_CBB
 356
 357 config MACH_SBC3530
 358         bool "OMAP3 SBC STALKER board"
 359         depends on ARCH_OMAP3
 360         default y
 361         select OMAP_PACKAGE_CUS
 362
 363 config MACH_OMAP_3630SDP
 364         bool "OMAP3630 SDP board"
 365         depends on ARCH_OMAP3
 366         default y
 367         select OMAP_PACKAGE_CBP
 368
 369 config MACH_TI8168EVM
 370         bool "TI8168 Evaluation Module"
 371         depends on SOC_TI81XX
 372         default y
 373
 374 config MACH_TI8148EVM
 375         bool "TI8148 Evaluation Module"
 376         depends on SOC_TI81XX
 377         default y
 378
 379 config MACH_OMAP_4430SDP
 380         bool "OMAP 4430 SDP board"
 381         default y
 382         depends on ARCH_OMAP4
 383         select OMAP_PACKAGE_CBL
 384         select OMAP_PACKAGE_CBS
 385         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 386
 387 config MACH_OMAP4_PANDA
 388         bool "OMAP4 Panda Board"
 389         default y
 390         depends on ARCH_OMAP4
 391         select OMAP_PACKAGE_CBL
 392         select OMAP_PACKAGE_CBS
 393         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 394
 395 config OMAP3_EMU
 396         bool "OMAP3 debugging peripherals"
 397         depends on ARCH_OMAP3
 398         select ARM_AMBA
 399         select OC_ETM
 400         help
 401           Say Y here to enable debugging hardware of omap3
 402
 403 config OMAP3_SDRC_AC_TIMING
 404         bool "Enable SDRC AC timing register changes"
 405         depends on ARCH_OMAP3
 406         default n
 407         help
 408           If you know that none of your system initiators will attempt to
 409           access SDRAM during CORE DVFS, select Y here.  This should boost
 410           SDRAM performance at lower CORE OPPs.  There are relatively few
 411           users who will wish to say yes at this point - almost everyone will
 412           wish to say no.  Selecting yes without understanding what is
 413           going on could result in system crashes;
 414
 415 config OMAP4_ERRATA_I688
 416         bool "OMAP4 errata: Async Bridge Corruption"
 417         depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM
 418         select ARCH_HAS_BARRIERS
 419         help
 420           If a data is stalled inside asynchronous bridge because of back
 421           pressure, it may be accepted multiple times, creating pointer
 422           misalignment that will corrupt next transfers on that data path
 423           until next reset of the system (No recovery procedure once the
 424           issue is hit, the path remains consistently broken). Async bridge
 425           can be found on path between MPU to EMIF and MPU to L3 interconnect.
 426           This situation can happen only when the idle is initiated by a
 427           Master Request Disconnection (which is trigged by software when
 428           executing WFI on CPU).
 429           The work-around for this errata needs all the initiators connected
 430           through async bridge must ensure that data path is properly drained
 431           before issuing WFI. This condition will be met if one Strongly ordered
 432           access is performed to the target right before executing the WFI.
 433           In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
 434           IO barrier ensure that there is no synchronisation loss on initiators
 435           operating on both interconnect port simultaneously.
 436 endmenu
 437
 438 endif