5 bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
6 select ARCH_HAS_CPUFREQ
7 select ARCH_HAS_BANDGAP
8 select ARCH_HAS_HOLES_MEMORYMODEL
10 select ARCH_REQUIRE_GPIOLIB
13 select GENERIC_CLOCKEVENTS
14 select GENERIC_IRQ_CHIP
18 select PROC_DEVICETREE if PROC_FS
23 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
28 menu "TI OMAP2/3/4 Specific Features"
30 config ARCH_OMAP2PLUS_TYPICAL
31 bool "Typical OMAP configuration"
37 select MENELAUS if ARCH_OMAP2
38 select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
41 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
42 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
45 Compile a kernel suitable for booting most boards
47 config SOC_HAS_OMAP2_SDRC
48 bool "OMAP2 SDRAM Controller support"
50 config SOC_HAS_REALTIME_COUNTER
51 bool "Real time free running counter"
57 depends on ARCH_OMAP2PLUS
58 depends on ARCH_MULTI_V6
61 select MULTI_IRQ_HANDLER
62 select SOC_HAS_OMAP2_SDRC
67 depends on ARCH_OMAP2PLUS
68 depends on ARCH_MULTI_V7
71 select ARM_CPU_SUSPEND if PM
73 select MULTI_IRQ_HANDLER
74 select OMAP_INTERCONNECT
76 select PM_RUNTIME if CPU_IDLE
77 select SOC_HAS_OMAP2_SDRC
79 select USB_ARCH_HAS_EHCI if USB_SUPPORT
84 depends on ARCH_OMAP2PLUS
85 depends on ARCH_MULTI_V7
87 select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
88 select ARM_CPU_SUSPEND if PM
89 select ARM_ERRATA_720789
93 select HAVE_ARM_SCU if SMP
94 select HAVE_ARM_TWD if LOCAL_TIMERS
96 select LOCAL_TIMERS if SMP
97 select OMAP_INTERCONNECT
98 select PL310_ERRATA_588369
99 select PL310_ERRATA_727915
101 select PM_RUNTIME if CPU_IDLE
102 select USB_ARCH_HAS_EHCI if USB_SUPPORT
104 select ARM_ERRATA_754322
105 select ARM_ERRATA_775420
109 depends on ARCH_MULTI_V7
110 select ARM_CPU_SUSPEND if PM
115 select HAVE_ARM_ARCH_TIMER
117 comment "OMAP Core Type"
118 depends on ARCH_OMAP2
121 bool "OMAP2420 support"
122 depends on ARCH_OMAP2
125 select SOC_HAS_OMAP2_SDRC
128 bool "OMAP2430 support"
129 depends on ARCH_OMAP2
131 select SOC_HAS_OMAP2_SDRC
134 bool "OMAP3430 support"
135 depends on ARCH_OMAP3
137 select SOC_HAS_OMAP2_SDRC
140 bool "TI81XX support"
141 depends on ARCH_OMAP3
145 bool "AM33XX support"
146 depends on ARCH_MULTI_V7
148 select ARM_CPU_SUSPEND if PM
150 select MULTI_IRQ_HANDLER
153 config OMAP_PACKAGE_ZAF
156 config OMAP_PACKAGE_ZAC
159 config OMAP_PACKAGE_CBC
162 config OMAP_PACKAGE_CBB
165 config OMAP_PACKAGE_CUS
168 config OMAP_PACKAGE_CBP
171 config OMAP_PACKAGE_CBL
174 config OMAP_PACKAGE_CBS
177 comment "OMAP Board Type"
178 depends on ARCH_OMAP2PLUS
180 config MACH_OMAP_GENERIC
181 bool "Generic OMAP2+ board"
182 depends on ARCH_OMAP2PLUS
185 Support for generic TI OMAP2+ boards using Flattened Device Tree.
186 More information at Documentation/devicetree
188 config MACH_OMAP2_TUSB6010
190 depends on ARCH_OMAP2 && SOC_OMAP2420
191 default y if MACH_NOKIA_N8X0
194 bool "OMAP 2420 H4 board"
195 depends on SOC_OMAP2420
197 select OMAP_DEBUG_DEVICES
198 select OMAP_PACKAGE_ZAF
200 config MACH_OMAP_2430SDP
201 bool "OMAP 2430 SDP board"
202 depends on SOC_OMAP2430
204 select OMAP_PACKAGE_ZAC
206 config MACH_OMAP3_BEAGLE
207 bool "OMAP3 BEAGLE board"
208 depends on ARCH_OMAP3
210 select OMAP_PACKAGE_CBB
212 config MACH_DEVKIT8000
213 bool "DEVKIT8000 board"
214 depends on ARCH_OMAP3
216 select OMAP_PACKAGE_CUS
219 bool "OMAP3 LDP board"
220 depends on ARCH_OMAP3
222 select OMAP_PACKAGE_CBB
224 config MACH_OMAP3530_LV_SOM
225 bool "OMAP3 Logic 3530 LV SOM board"
226 depends on ARCH_OMAP3
228 select OMAP_PACKAGE_CBB
230 Support for the LogicPD OMAP3530 SOM Development kit
231 for full description please see the products webpage at
232 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
234 config MACH_OMAP3_TORPEDO
235 bool "OMAP3 Logic 35x Torpedo board"
236 depends on ARCH_OMAP3
238 select OMAP_PACKAGE_CBB
240 Support for the LogicPD OMAP35x Torpedo Development kit
241 for full description please see the products webpage at
242 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
245 bool "Gumstix Overo board"
246 depends on ARCH_OMAP3
248 select OMAP_PACKAGE_CBB
251 bool "OMAP 3530 EVM board"
252 depends on ARCH_OMAP3
254 select OMAP_PACKAGE_CBB
256 config MACH_OMAP3517EVM
257 bool "OMAP3517/ AM3517 EVM board"
258 depends on ARCH_OMAP3
260 select OMAP_PACKAGE_CBB
262 config MACH_CRANEBOARD
263 bool "AM3517/05 CRANE board"
264 depends on ARCH_OMAP3
265 select OMAP_PACKAGE_CBB
267 config MACH_OMAP3_PANDORA
269 depends on ARCH_OMAP3
271 select OMAP_PACKAGE_CBB
272 select REGULATOR_FIXED_VOLTAGE if REGULATOR
274 config MACH_TOUCHBOOK
275 bool "OMAP3 Touch Book"
276 depends on ARCH_OMAP3
278 select OMAP_PACKAGE_CBB
280 config MACH_OMAP_3430SDP
281 bool "OMAP 3430 SDP board"
282 depends on ARCH_OMAP3
284 select OMAP_PACKAGE_CBB
286 config MACH_NOKIA_N800
289 config MACH_NOKIA_N810
292 config MACH_NOKIA_N810_WIMAX
295 config MACH_NOKIA_N8X0
296 bool "Nokia N800/N810"
297 depends on SOC_OMAP2420
299 select MACH_NOKIA_N800
300 select MACH_NOKIA_N810
301 select MACH_NOKIA_N810_WIMAX
302 select OMAP_PACKAGE_ZAC
304 config MACH_NOKIA_RM680
305 bool "Nokia N950 (RM-680) / N9 (RM-696) phones"
306 depends on ARCH_OMAP3
308 select MACH_NOKIA_RM696
309 select OMAP_PACKAGE_CBB
311 config MACH_NOKIA_RX51
312 bool "Nokia N900 (RX-51) phone"
313 depends on ARCH_OMAP3
315 select OMAP_PACKAGE_CBB
317 config MACH_OMAP_ZOOM2
318 bool "OMAP3 Zoom2 board"
319 depends on ARCH_OMAP3
321 select OMAP_PACKAGE_CBB
322 select REGULATOR_FIXED_VOLTAGE if REGULATOR
324 config MACH_OMAP_ZOOM3
325 bool "OMAP3630 Zoom3 board"
326 depends on ARCH_OMAP3
328 select OMAP_PACKAGE_CBP
329 select REGULATOR_FIXED_VOLTAGE if REGULATOR
332 bool "CompuLab CM-T35/CM-T3730 modules"
333 depends on ARCH_OMAP3
336 select OMAP_PACKAGE_CUS
339 bool "CompuLab CM-T3517 module"
340 depends on ARCH_OMAP3
342 select OMAP_PACKAGE_CBB
349 depends on ARCH_OMAP3
351 select OMAP_PACKAGE_CBB
354 bool "IGEP OMAP3 module"
355 depends on ARCH_OMAP3
358 select OMAP_PACKAGE_CBB
361 bool "OMAP3 SBC STALKER board"
362 depends on ARCH_OMAP3
364 select OMAP_PACKAGE_CUS
366 config MACH_OMAP_3630SDP
367 bool "OMAP3630 SDP board"
368 depends on ARCH_OMAP3
370 select OMAP_PACKAGE_CBP
372 config MACH_TI8168EVM
373 bool "TI8168 Evaluation Module"
374 depends on SOC_TI81XX
377 config MACH_TI8148EVM
378 bool "TI8148 Evaluation Module"
379 depends on SOC_TI81XX
382 config MACH_OMAP_4430SDP
383 bool "OMAP 4430 SDP board"
385 depends on ARCH_OMAP4
386 select OMAP_PACKAGE_CBL
387 select OMAP_PACKAGE_CBS
388 select REGULATOR_FIXED_VOLTAGE if REGULATOR
390 config MACH_OMAP4_PANDA
391 bool "OMAP4 Panda Board"
393 depends on ARCH_OMAP4
394 select OMAP_PACKAGE_CBL
395 select OMAP_PACKAGE_CBS
396 select REGULATOR_FIXED_VOLTAGE if REGULATOR
399 bool "OMAP3 debugging peripherals"
400 depends on ARCH_OMAP3
404 Say Y here to enable debugging hardware of omap3
406 config OMAP3_SDRC_AC_TIMING
407 bool "Enable SDRC AC timing register changes"
408 depends on ARCH_OMAP3
411 If you know that none of your system initiators will attempt to
412 access SDRAM during CORE DVFS, select Y here. This should boost
413 SDRAM performance at lower CORE OPPs. There are relatively few
414 users who will wish to say yes at this point - almost everyone will
415 wish to say no. Selecting yes without understanding what is
416 going on could result in system crashes;
418 config OMAP4_ERRATA_I688
419 bool "OMAP4 errata: Async Bridge Corruption"
420 depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
421 select ARCH_HAS_BARRIERS
423 If a data is stalled inside asynchronous bridge because of back
424 pressure, it may be accepted multiple times, creating pointer
425 misalignment that will corrupt next transfers on that data path
426 until next reset of the system (No recovery procedure once the
427 issue is hit, the path remains consistently broken). Async bridge
428 can be found on path between MPU to EMIF and MPU to L3 interconnect.
429 This situation can happen only when the idle is initiated by a
430 Master Request Disconnection (which is trigged by software when
431 executing WFI on CPU).
432 The work-around for this errata needs all the initiators connected
433 through async bridge must ensure that data path is properly drained
434 before issuing WFI. This condition will be met if one Strongly ordered
435 access is performed to the target right before executing the WFI.
436 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
437 IO barrier ensure that there is no synchronisation loss on initiators
438 operating on both interconnect port simultaneously.