arch/arm/mach-omap2/Kconfig

   1 if ARCH_OMAP2PLUS
   2
   3 menu "TI OMAP2/3/4 Specific Features"
   4
   5 config ARCH_OMAP2PLUS_TYPICAL
   6         bool "Typical OMAP configuration"
   7         default y
   8         select AEABI
   9         select REGULATOR
  10         select PM_RUNTIME
  11         select VFP
  12         select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
  13         select SERIAL_OMAP
  14         select SERIAL_OMAP_CONSOLE
  15         select I2C
  16         select I2C_OMAP
  17         select MENELAUS if ARCH_OMAP2
  18         select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
  19         select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
  20         select HIGHMEM
  21         help
  22           Compile a kernel suitable for booting most boards
  23
  24 config SOC_HAS_OMAP2_SDRC
  25         bool "OMAP2 SDRAM Controller support"
  26
  27 config ARCH_OMAP2
  28         bool "TI OMAP2"
  29         depends on ARCH_OMAP2PLUS
  30         default y
  31         select CPU_V6
  32         select MULTI_IRQ_HANDLER
  33         select SOC_HAS_OMAP2_SDRC
  34
  35 config ARCH_OMAP3
  36         bool "TI OMAP3"
  37         depends on ARCH_OMAP2PLUS
  38         default y
  39         select CPU_V7
  40         select USB_ARCH_HAS_EHCI if USB_SUPPORT
  41         select ARCH_HAS_OPP
  42         select PM_RUNTIME if CPU_IDLE
  43         select PM_OPP if PM
  44         select ARM_CPU_SUSPEND if PM
  45         select MULTI_IRQ_HANDLER
  46         select SOC_HAS_OMAP2_SDRC
  47
  48 config ARCH_OMAP4
  49         bool "TI OMAP4"
  50         default y
  51         depends on ARCH_OMAP2PLUS
  52         select CACHE_L2X0
  53         select CPU_V7
  54         select ARM_GIC
  55         select HAVE_SMP
  56         select LOCAL_TIMERS if SMP
  57         select PL310_ERRATA_588369
  58         select PL310_ERRATA_727915
  59         select ARM_ERRATA_720789
  60         select ARCH_HAS_OPP
  61         select PM_RUNTIME if CPU_IDLE
  62         select PM_OPP if PM
  63         select USB_ARCH_HAS_EHCI if USB_SUPPORT
  64         select ARM_CPU_SUSPEND if PM
  65         select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
  66
  67 config SOC_OMAP5
  68         bool "TI OMAP5"
  69         select CPU_V7
  70         select ARM_GIC
  71         select HAVE_SMP
  72         select ARM_CPU_SUSPEND if PM
  73
  74 comment "OMAP Core Type"
  75         depends on ARCH_OMAP2
  76
  77 config SOC_OMAP2420
  78         bool "OMAP2420 support"
  79         depends on ARCH_OMAP2
  80         default y
  81         select OMAP_DM_TIMER
  82         select SOC_HAS_OMAP2_SDRC
  83
  84 config SOC_OMAP2430
  85         bool "OMAP2430 support"
  86         depends on ARCH_OMAP2
  87         default y
  88         select SOC_HAS_OMAP2_SDRC
  89
  90 config SOC_OMAP3430
  91         bool "OMAP3430 support"
  92         depends on ARCH_OMAP3
  93         default y
  94         select SOC_HAS_OMAP2_SDRC
  95
  96 config SOC_TI81XX
  97         bool "TI81XX support"
  98         depends on ARCH_OMAP3
  99         default y
 100
 101 config SOC_AM33XX
 102         bool "AM33XX support"
 103         default y
 104         select CPU_V7
 105         select ARM_CPU_SUSPEND if PM
 106         select MULTI_IRQ_HANDLER
 107
 108 config OMAP_PACKAGE_ZAF
 109        bool
 110
 111 config OMAP_PACKAGE_ZAC
 112        bool
 113
 114 config OMAP_PACKAGE_CBC
 115        bool
 116
 117 config OMAP_PACKAGE_CBB
 118        bool
 119
 120 config OMAP_PACKAGE_CUS
 121        bool
 122
 123 config OMAP_PACKAGE_CBP
 124        bool
 125
 126 config OMAP_PACKAGE_CBL
 127        bool
 128
 129 config OMAP_PACKAGE_CBS
 130        bool
 131
 132 comment "OMAP Board Type"
 133         depends on ARCH_OMAP2PLUS
 134
 135 config MACH_OMAP_GENERIC
 136         bool "Generic OMAP2+ board"
 137         depends on ARCH_OMAP2PLUS
 138         default y
 139         help
 140           Support for generic TI OMAP2+ boards using Flattened Device Tree.
 141           More information at Documentation/devicetree
 142
 143 config MACH_OMAP2_TUSB6010
 144         bool
 145         depends on ARCH_OMAP2 && SOC_OMAP2420
 146         default y if MACH_NOKIA_N8X0
 147
 148 config MACH_OMAP_H4
 149         bool "OMAP 2420 H4 board"
 150         depends on SOC_OMAP2420
 151         default y
 152         select OMAP_PACKAGE_ZAF
 153         select OMAP_DEBUG_DEVICES
 154
 155 config MACH_OMAP_APOLLON
 156         bool "OMAP 2420 Apollon board"
 157         depends on SOC_OMAP2420
 158         default y
 159         select OMAP_PACKAGE_ZAC
 160
 161 config MACH_OMAP_2430SDP
 162         bool "OMAP 2430 SDP board"
 163         depends on SOC_OMAP2430
 164         default y
 165         select OMAP_PACKAGE_ZAC
 166
 167 config MACH_OMAP3_BEAGLE
 168         bool "OMAP3 BEAGLE board"
 169         depends on ARCH_OMAP3
 170         default y
 171         select OMAP_PACKAGE_CBB
 172
 173 config MACH_DEVKIT8000
 174         bool "DEVKIT8000 board"
 175         depends on ARCH_OMAP3
 176         default y
 177         select OMAP_PACKAGE_CUS
 178
 179 config MACH_OMAP_LDP
 180         bool "OMAP3 LDP board"
 181         depends on ARCH_OMAP3
 182         default y
 183         select OMAP_PACKAGE_CBB
 184
 185 config MACH_OMAP3530_LV_SOM
 186         bool "OMAP3 Logic 3530 LV SOM board"
 187         depends on ARCH_OMAP3
 188         select OMAP_PACKAGE_CBB
 189         default y
 190         help
 191          Support for the LogicPD OMAP3530 SOM Development kit
 192          for full description please see the products webpage at
 193          http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
 194
 195 config MACH_OMAP3_TORPEDO
 196         bool "OMAP3 Logic 35x Torpedo board"
 197         depends on ARCH_OMAP3
 198         select OMAP_PACKAGE_CBB
 199         default y
 200         help
 201          Support for the LogicPD OMAP35x Torpedo Development kit
 202          for full description please see the products webpage at
 203          http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
 204
 205 config MACH_OVERO
 206         bool "Gumstix Overo board"
 207         depends on ARCH_OMAP3
 208         default y
 209         select OMAP_PACKAGE_CBB
 210
 211 config MACH_OMAP3EVM
 212         bool "OMAP 3530 EVM board"
 213         depends on ARCH_OMAP3
 214         default y
 215         select OMAP_PACKAGE_CBB
 216
 217 config MACH_OMAP3517EVM
 218         bool "OMAP3517/ AM3517 EVM board"
 219         depends on ARCH_OMAP3
 220         default y
 221         select OMAP_PACKAGE_CBB
 222
 223 config MACH_CRANEBOARD
 224         bool "AM3517/05 CRANE board"
 225         depends on ARCH_OMAP3
 226         select OMAP_PACKAGE_CBB
 227
 228 config MACH_OMAP3_PANDORA
 229         bool "OMAP3 Pandora"
 230         depends on ARCH_OMAP3
 231         default y
 232         select OMAP_PACKAGE_CBB
 233         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 234
 235 config MACH_OMAP3_TOUCHBOOK
 236         bool "OMAP3 Touch Book"
 237         depends on ARCH_OMAP3
 238         default y
 239
 240 config MACH_OMAP_3430SDP
 241         bool "OMAP 3430 SDP board"
 242         depends on ARCH_OMAP3
 243         default y
 244         select OMAP_PACKAGE_CBB
 245
 246 config MACH_NOKIA_N800
 247        bool
 248
 249 config MACH_NOKIA_N810
 250        bool
 251
 252 config MACH_NOKIA_N810_WIMAX
 253        bool
 254
 255 config MACH_NOKIA_N8X0
 256         bool "Nokia N800/N810"
 257         depends on SOC_OMAP2420
 258         default y
 259         select OMAP_PACKAGE_ZAC
 260         select MACH_NOKIA_N800
 261         select MACH_NOKIA_N810
 262         select MACH_NOKIA_N810_WIMAX
 263
 264 config MACH_NOKIA_RM680
 265         bool "Nokia RM-680/696 board"
 266         depends on ARCH_OMAP3
 267         default y
 268         select OMAP_PACKAGE_CBB
 269         select MACH_NOKIA_RM696
 270
 271 config MACH_NOKIA_RX51
 272         bool "Nokia RX-51 board"
 273         depends on ARCH_OMAP3
 274         default y
 275         select OMAP_PACKAGE_CBB
 276
 277 config MACH_OMAP_ZOOM2
 278         bool "OMAP3 Zoom2 board"
 279         depends on ARCH_OMAP3
 280         default y
 281         select OMAP_PACKAGE_CBB
 282         select SERIAL_8250
 283         select SERIAL_CORE_CONSOLE
 284         select SERIAL_8250_CONSOLE
 285         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 286
 287 config MACH_OMAP_ZOOM3
 288         bool "OMAP3630 Zoom3 board"
 289         depends on ARCH_OMAP3
 290         default y
 291         select OMAP_PACKAGE_CBP
 292         select SERIAL_8250
 293         select SERIAL_CORE_CONSOLE
 294         select SERIAL_8250_CONSOLE
 295         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 296
 297 config MACH_CM_T35
 298         bool "CompuLab CM-T35/CM-T3730 modules"
 299         depends on ARCH_OMAP3
 300         default y
 301         select MACH_CM_T3730
 302         select OMAP_PACKAGE_CUS
 303
 304 config MACH_CM_T3517
 305         bool "CompuLab CM-T3517 module"
 306         depends on ARCH_OMAP3
 307         default y
 308         select OMAP_PACKAGE_CBB
 309
 310 config MACH_CM_T3730
 311        bool
 312
 313 config MACH_IGEP0020
 314         bool "IGEP v2 board"
 315         depends on ARCH_OMAP3
 316         default y
 317         select OMAP_PACKAGE_CBB
 318
 319 config MACH_IGEP0030
 320         bool "IGEP OMAP3 module"
 321         depends on ARCH_OMAP3
 322         default y
 323         select OMAP_PACKAGE_CBB
 324         select MACH_IGEP0020
 325
 326 config MACH_SBC3530
 327         bool "OMAP3 SBC STALKER board"
 328         depends on ARCH_OMAP3
 329         default y
 330         select OMAP_PACKAGE_CUS
 331
 332 config MACH_OMAP_3630SDP
 333         bool "OMAP3630 SDP board"
 334         depends on ARCH_OMAP3
 335         default y
 336         select OMAP_PACKAGE_CBP
 337
 338 config MACH_TI8168EVM
 339         bool "TI8168 Evaluation Module"
 340         depends on SOC_TI81XX
 341         default y
 342
 343 config MACH_TI8148EVM
 344         bool "TI8148 Evaluation Module"
 345         depends on SOC_TI81XX
 346         default y
 347
 348 config MACH_OMAP_4430SDP
 349         bool "OMAP 4430 SDP board"
 350         default y
 351         depends on ARCH_OMAP4
 352         select OMAP_PACKAGE_CBL
 353         select OMAP_PACKAGE_CBS
 354         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 355
 356 config MACH_OMAP4_PANDA
 357         bool "OMAP4 Panda Board"
 358         default y
 359         depends on ARCH_OMAP4
 360         select OMAP_PACKAGE_CBL
 361         select OMAP_PACKAGE_CBS
 362         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 363
 364 config OMAP3_EMU
 365         bool "OMAP3 debugging peripherals"
 366         depends on ARCH_OMAP3
 367         select ARM_AMBA
 368         select OC_ETM
 369         help
 370           Say Y here to enable debugging hardware of omap3
 371
 372 config OMAP3_SDRC_AC_TIMING
 373         bool "Enable SDRC AC timing register changes"
 374         depends on ARCH_OMAP3
 375         default n
 376         help
 377           If you know that none of your system initiators will attempt to
 378           access SDRAM during CORE DVFS, select Y here.  This should boost
 379           SDRAM performance at lower CORE OPPs.  There are relatively few
 380           users who will wish to say yes at this point - almost everyone will
 381           wish to say no.  Selecting yes without understanding what is
 382           going on could result in system crashes;
 383
 384 config OMAP4_ERRATA_I688
 385         bool "OMAP4 errata: Async Bridge Corruption"
 386         depends on ARCH_OMAP4
 387         select ARCH_HAS_BARRIERS
 388         help
 389           If a data is stalled inside asynchronous bridge because of back
 390           pressure, it may be accepted multiple times, creating pointer
 391           misalignment that will corrupt next transfers on that data path
 392           until next reset of the system (No recovery procedure once the
 393           issue is hit, the path remains consistently broken). Async bridge
 394           can be found on path between MPU to EMIF and MPU to L3 interconnect.
 395           This situation can happen only when the idle is initiated by a
 396           Master Request Disconnection (which is trigged by software when
 397           executing WFI on CPU).
 398           The work-around for this errata needs all the initiators connected
 399           through async bridge must ensure that data path is properly drained
 400           before issuing WFI. This condition will be met if one Strongly ordered
 401           access is performed to the target right before executing the WFI.
 402           In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
 403           IO barrier ensure that there is no synchronisation loss on initiators
 404           operating on both interconnect port simultaneously.
 405 endmenu
 406
 407 endif