OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module idle in _setup()
[deliverable/linux.git] / arch / arm / mach-omap2 / io.c
1 /*
2 * linux/arch/arm/mach-omap2/io.c
3 *
4 * OMAP2 I/O mapping code
5 *
6 * Copyright (C) 2005 Nokia Corporation
7 * Copyright (C) 2007-2009 Texas Instruments
8 *
9 * Author:
10 * Juha Yrjola <juha.yrjola@nokia.com>
11 * Syed Khasim <x0khasim@ti.com>
12 *
13 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License version 2 as
17 * published by the Free Software Foundation.
18 */
19
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/init.h>
23 #include <linux/io.h>
24 #include <linux/clk.h>
25 #include <linux/omapfb.h>
26
27 #include <asm/tlb.h>
28
29 #include <asm/mach/map.h>
30
31 #include <plat/mux.h>
32 #include <plat/sram.h>
33 #include <plat/sdrc.h>
34 #include <plat/gpmc.h>
35 #include <plat/serial.h>
36 #include <plat/vram.h>
37
38 #include "clock2xxx.h"
39 #include "clock3xxx.h"
40 #include "clock44xx.h"
41
42 #include <plat/omap-pm.h>
43 #include <plat/powerdomain.h>
44 #include "powerdomains.h"
45
46 #include <plat/clockdomain.h>
47 #include "clockdomains.h"
48 #include <plat/omap_hwmod.h>
49
50 /*
51 * The machine specific code may provide the extra mapping besides the
52 * default mapping provided here.
53 */
54
55 #ifdef CONFIG_ARCH_OMAP2
56 static struct map_desc omap24xx_io_desc[] __initdata = {
57 {
58 .virtual = L3_24XX_VIRT,
59 .pfn = __phys_to_pfn(L3_24XX_PHYS),
60 .length = L3_24XX_SIZE,
61 .type = MT_DEVICE
62 },
63 {
64 .virtual = L4_24XX_VIRT,
65 .pfn = __phys_to_pfn(L4_24XX_PHYS),
66 .length = L4_24XX_SIZE,
67 .type = MT_DEVICE
68 },
69 };
70
71 #ifdef CONFIG_ARCH_OMAP2420
72 static struct map_desc omap242x_io_desc[] __initdata = {
73 {
74 .virtual = DSP_MEM_2420_VIRT,
75 .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
76 .length = DSP_MEM_2420_SIZE,
77 .type = MT_DEVICE
78 },
79 {
80 .virtual = DSP_IPI_2420_VIRT,
81 .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
82 .length = DSP_IPI_2420_SIZE,
83 .type = MT_DEVICE
84 },
85 {
86 .virtual = DSP_MMU_2420_VIRT,
87 .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
88 .length = DSP_MMU_2420_SIZE,
89 .type = MT_DEVICE
90 },
91 };
92
93 #endif
94
95 #ifdef CONFIG_ARCH_OMAP2430
96 static struct map_desc omap243x_io_desc[] __initdata = {
97 {
98 .virtual = L4_WK_243X_VIRT,
99 .pfn = __phys_to_pfn(L4_WK_243X_PHYS),
100 .length = L4_WK_243X_SIZE,
101 .type = MT_DEVICE
102 },
103 {
104 .virtual = OMAP243X_GPMC_VIRT,
105 .pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
106 .length = OMAP243X_GPMC_SIZE,
107 .type = MT_DEVICE
108 },
109 {
110 .virtual = OMAP243X_SDRC_VIRT,
111 .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
112 .length = OMAP243X_SDRC_SIZE,
113 .type = MT_DEVICE
114 },
115 {
116 .virtual = OMAP243X_SMS_VIRT,
117 .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
118 .length = OMAP243X_SMS_SIZE,
119 .type = MT_DEVICE
120 },
121 };
122 #endif
123 #endif
124
125 #ifdef CONFIG_ARCH_OMAP3
126 static struct map_desc omap34xx_io_desc[] __initdata = {
127 {
128 .virtual = L3_34XX_VIRT,
129 .pfn = __phys_to_pfn(L3_34XX_PHYS),
130 .length = L3_34XX_SIZE,
131 .type = MT_DEVICE
132 },
133 {
134 .virtual = L4_34XX_VIRT,
135 .pfn = __phys_to_pfn(L4_34XX_PHYS),
136 .length = L4_34XX_SIZE,
137 .type = MT_DEVICE
138 },
139 {
140 .virtual = OMAP34XX_GPMC_VIRT,
141 .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
142 .length = OMAP34XX_GPMC_SIZE,
143 .type = MT_DEVICE
144 },
145 {
146 .virtual = OMAP343X_SMS_VIRT,
147 .pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
148 .length = OMAP343X_SMS_SIZE,
149 .type = MT_DEVICE
150 },
151 {
152 .virtual = OMAP343X_SDRC_VIRT,
153 .pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
154 .length = OMAP343X_SDRC_SIZE,
155 .type = MT_DEVICE
156 },
157 {
158 .virtual = L4_PER_34XX_VIRT,
159 .pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
160 .length = L4_PER_34XX_SIZE,
161 .type = MT_DEVICE
162 },
163 {
164 .virtual = L4_EMU_34XX_VIRT,
165 .pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
166 .length = L4_EMU_34XX_SIZE,
167 .type = MT_DEVICE
168 },
169 #if defined(CONFIG_DEBUG_LL) && \
170 (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
171 {
172 .virtual = ZOOM_UART_VIRT,
173 .pfn = __phys_to_pfn(ZOOM_UART_BASE),
174 .length = SZ_1M,
175 .type = MT_DEVICE
176 },
177 #endif
178 };
179 #endif
180 #ifdef CONFIG_ARCH_OMAP4
181 static struct map_desc omap44xx_io_desc[] __initdata = {
182 {
183 .virtual = L3_44XX_VIRT,
184 .pfn = __phys_to_pfn(L3_44XX_PHYS),
185 .length = L3_44XX_SIZE,
186 .type = MT_DEVICE,
187 },
188 {
189 .virtual = L4_44XX_VIRT,
190 .pfn = __phys_to_pfn(L4_44XX_PHYS),
191 .length = L4_44XX_SIZE,
192 .type = MT_DEVICE,
193 },
194 {
195 .virtual = OMAP44XX_GPMC_VIRT,
196 .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
197 .length = OMAP44XX_GPMC_SIZE,
198 .type = MT_DEVICE,
199 },
200 {
201 .virtual = OMAP44XX_EMIF1_VIRT,
202 .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
203 .length = OMAP44XX_EMIF1_SIZE,
204 .type = MT_DEVICE,
205 },
206 {
207 .virtual = OMAP44XX_EMIF2_VIRT,
208 .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
209 .length = OMAP44XX_EMIF2_SIZE,
210 .type = MT_DEVICE,
211 },
212 {
213 .virtual = OMAP44XX_DMM_VIRT,
214 .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS),
215 .length = OMAP44XX_DMM_SIZE,
216 .type = MT_DEVICE,
217 },
218 {
219 .virtual = L4_PER_44XX_VIRT,
220 .pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
221 .length = L4_PER_44XX_SIZE,
222 .type = MT_DEVICE,
223 },
224 {
225 .virtual = L4_EMU_44XX_VIRT,
226 .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS),
227 .length = L4_EMU_44XX_SIZE,
228 .type = MT_DEVICE,
229 },
230 };
231 #endif
232
233 static void __init _omap2_map_common_io(void)
234 {
235 /* Normally devicemaps_init() would flush caches and tlb after
236 * mdesc->map_io(), but we must also do it here because of the CPU
237 * revision check below.
238 */
239 local_flush_tlb_all();
240 flush_cache_all();
241
242 omap2_check_revision();
243 omap_sram_init();
244 omapfb_reserve_sdram();
245 omap_vram_reserve_sdram();
246 }
247
248 #ifdef CONFIG_ARCH_OMAP2420
249 void __init omap242x_map_common_io(void)
250 {
251 iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
252 iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
253 _omap2_map_common_io();
254 }
255 #endif
256
257 #ifdef CONFIG_ARCH_OMAP2430
258 void __init omap243x_map_common_io(void)
259 {
260 iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
261 iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
262 _omap2_map_common_io();
263 }
264 #endif
265
266 #ifdef CONFIG_ARCH_OMAP3
267 void __init omap34xx_map_common_io(void)
268 {
269 iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
270 _omap2_map_common_io();
271 }
272 #endif
273
274 #ifdef CONFIG_ARCH_OMAP4
275 void __init omap44xx_map_common_io(void)
276 {
277 iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
278 _omap2_map_common_io();
279 }
280 #endif
281
282 /*
283 * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
284 *
285 * Sets the CORE DPLL3 M2 divider to the same value that it's at
286 * currently. This has the effect of setting the SDRC SDRAM AC timing
287 * registers to the values currently defined by the kernel. Currently
288 * only defined for OMAP3; will return 0 if called on OMAP2. Returns
289 * -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
290 * or passes along the return value of clk_set_rate().
291 */
292 static int __init _omap2_init_reprogram_sdrc(void)
293 {
294 struct clk *dpll3_m2_ck;
295 int v = -EINVAL;
296 long rate;
297
298 if (!cpu_is_omap34xx())
299 return 0;
300
301 dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
302 if (!dpll3_m2_ck)
303 return -EINVAL;
304
305 rate = clk_get_rate(dpll3_m2_ck);
306 pr_info("Reprogramming SDRC clock to %ld Hz\n", rate);
307 v = clk_set_rate(dpll3_m2_ck, rate);
308 if (v)
309 pr_err("dpll3_m2_clk rate change failed: %d\n", v);
310
311 clk_put(dpll3_m2_ck);
312
313 return v;
314 }
315
316 void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
317 struct omap_sdrc_params *sdrc_cs1)
318 {
319 u8 skip_setup_idle = 0;
320
321 pwrdm_init(powerdomains_omap);
322 clkdm_init(clockdomains_omap, clkdm_autodeps);
323 if (cpu_is_omap242x())
324 omap2420_hwmod_init();
325 else if (cpu_is_omap243x())
326 omap2430_hwmod_init();
327 else if (cpu_is_omap34xx())
328 omap3xxx_hwmod_init();
329 omap2_mux_init();
330 /* The OPP tables have to be registered before a clk init */
331 omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
332
333 if (cpu_is_omap2420())
334 omap2420_clk_init();
335 else if (cpu_is_omap2430())
336 omap2430_clk_init();
337 else if (cpu_is_omap34xx())
338 omap3xxx_clk_init();
339 else if (cpu_is_omap44xx())
340 omap4xxx_clk_init();
341 else
342 pr_err("Could not init clock framework - unknown CPU\n");
343
344 omap_serial_early_init();
345
346 #ifndef CONFIG_PM_RUNTIME
347 skip_setup_idle = 1;
348 #endif
349 if (cpu_is_omap24xx() || cpu_is_omap34xx()) /* FIXME: OMAP4 */
350 omap_hwmod_late_init(skip_setup_idle);
351
352 omap_pm_if_init();
353 if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
354 omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
355 _omap2_init_reprogram_sdrc();
356 }
357 gpmc_init();
358 }
This page took 0.039121 seconds and 5 git commands to generate.