arch/arm/mach-omap2/sleep34xx.S

   1 /*
   2  * (C) Copyright 2007
   3  * Texas Instruments
   4  * Karthik Dasu <karthik-dp@ti.com>
   5  *
   6  * (C) Copyright 2004
   7  * Texas Instruments, <www.ti.com>
   8  * Richard Woodruff <r-woodruff2@ti.com>
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25 #include <linux/linkage.h>
  26
  27 #include <asm/assembler.h>
  28
  29 #include "omap34xx.h"
  30 #include "iomap.h"
  31 #include "cm3xxx.h"
  32 #include "prm3xxx.h"
  33 #include "sdrc.h"
  34 #include "sram.h"
  35 #include "control.h"
  36
  37 /*
  38  * Registers access definitions
  39  */
  40 #define SDRC_SCRATCHPAD_SEM_OFFS        0xc
  41 #define SDRC_SCRATCHPAD_SEM_V   OMAP343X_SCRATCHPAD_REGADDR\
  42                                         (SDRC_SCRATCHPAD_SEM_OFFS)
  43 #define PM_PREPWSTST_CORE_P     OMAP3430_PRM_BASE + CORE_MOD +\
  44                                         OMAP3430_PM_PREPWSTST
  45 #define PM_PWSTCTRL_MPU_P       OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
  46 #define CM_IDLEST1_CORE_V       OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
  47 #define CM_IDLEST_CKGEN_V       OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
  48 #define SRAM_BASE_P             OMAP3_SRAM_PA
  49 #define CONTROL_STAT            OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS
  50 #define CONTROL_MEM_RTA_CTRL    (OMAP343X_CTRL_BASE +\
  51                                         OMAP36XX_CONTROL_MEM_RTA_CTRL)
  52
  53 /* Move this as correct place is available */
  54 #define SCRATCHPAD_MEM_OFFS     0x310
  55 #define SCRATCHPAD_BASE_P       (OMAP343X_CTRL_BASE +\
  56                                         OMAP343X_CONTROL_MEM_WKUP +\
  57                                         SCRATCHPAD_MEM_OFFS)
  58 #define SDRC_POWER_V            OMAP34XX_SDRC_REGADDR(SDRC_POWER)
  59 #define SDRC_SYSCONFIG_P        (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
  60 #define SDRC_MR_0_P             (OMAP343X_SDRC_BASE + SDRC_MR_0)
  61 #define SDRC_EMR2_0_P           (OMAP343X_SDRC_BASE + SDRC_EMR2_0)
  62 #define SDRC_MANUAL_0_P         (OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
  63 #define SDRC_MR_1_P             (OMAP343X_SDRC_BASE + SDRC_MR_1)
  64 #define SDRC_EMR2_1_P           (OMAP343X_SDRC_BASE + SDRC_EMR2_1)
  65 #define SDRC_MANUAL_1_P         (OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
  66 #define SDRC_DLLA_STATUS_V      OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
  67 #define SDRC_DLLA_CTRL_V        OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
  68
  69 /*
  70  * This file needs be built unconditionally as ARM to interoperate correctly
  71  * with non-Thumb-2-capable firmware.
  72  */
  73         .arm
  74
  75 /*
  76  * API functions
  77  */
  78
  79         .text
  80 /*
  81  * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
  82  * This function sets up a flag that will allow for this toggling to take
  83  * place on 3630. Hopefully some version in the future may not need this.
  84  */
  85 ENTRY(enable_omap3630_toggle_l2_on_restore)
  86         stmfd   sp!, {lr}       @ save registers on stack
  87         /* Setup so that we will disable and enable l2 */
  88         mov     r1, #0x1
  89         adrl    r2, l2dis_3630  @ may be too distant for plain adr
  90         str     r1, [r2]
  91         ldmfd   sp!, {pc}       @ restore regs and return
  92 ENDPROC(enable_omap3630_toggle_l2_on_restore)
  93
  94         .text
  95 /* Function to call rom code to save secure ram context */
  96         .align  3
  97 ENTRY(save_secure_ram_context)
  98         stmfd   sp!, {r4 - r11, lr}     @ save registers on stack
  99         adr     r3, api_params          @ r3 points to parameters
 100         str     r0, [r3,#0x4]           @ r0 has sdram address
 101         ldr     r12, high_mask
 102         and     r3, r3, r12
 103         ldr     r12, sram_phy_addr_mask
 104         orr     r3, r3, r12
 105         mov     r0, #25                 @ set service ID for PPA
 106         mov     r12, r0                 @ copy secure service ID in r12
 107         mov     r1, #0                  @ set task id for ROM code in r1
 108         mov     r2, #4                  @ set some flags in r2, r6
 109         mov     r6, #0xff
 110         dsb                             @ data write barrier
 111         dmb                             @ data memory barrier
 112         smc     #1                      @ call SMI monitor (smi #1)
 113         nop
 114         nop
 115         nop
 116         nop
 117         ldmfd   sp!, {r4 - r11, pc}
 118         .align
 119 sram_phy_addr_mask:
 120         .word   SRAM_BASE_P
 121 high_mask:
 122         .word   0xffff
 123 api_params:
 124         .word   0x4, 0x0, 0x0, 0x1, 0x1
 125 ENDPROC(save_secure_ram_context)
 126 ENTRY(save_secure_ram_context_sz)
 127         .word   . - save_secure_ram_context
 128
 129 /*
 130  * ======================
 131  * == Idle entry point ==
 132  * ======================
 133  */
 134
 135 /*
 136  * Forces OMAP into idle state
 137  *
 138  * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed
 139  * and executes the WFI instruction. Calling WFI effectively changes the
 140  * power domains states to the desired target power states.
 141  *
 142  *
 143  * Notes:
 144  * - only the minimum set of functions gets copied to internal SRAM at boot
 145  *   and after wake-up from OFF mode, cf. omap_push_sram_idle. The function
 146  *   pointers in SDRAM or SRAM are called depending on the desired low power
 147  *   target state.
 148  * - when the OMAP wakes up it continues at different execution points
 149  *   depending on the low power mode (non-OFF vs OFF modes),
 150  *   cf. 'Resume path for xxx mode' comments.
 151  */
 152         .align  3
 153 ENTRY(omap34xx_cpu_suspend)
 154         stmfd   sp!, {r4 - r11, lr}     @ save registers on stack
 155
 156         /*
 157          * r0 contains information about saving context:
 158          *   0 - No context lost
 159          *   1 - Only L1 and logic lost
 160          *   2 - Only L2 lost (Even L1 is retained we clean it along with L2)
 161          *   3 - Both L1 and L2 lost and logic lost
 162          */
 163
 164         /*
 165          * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi)
 166          * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram)
 167          */
 168         ldr     r4, omap3_do_wfi_sram_addr
 169         ldr     r5, [r4]
 170         cmp     r0, #0x0                @ If no context save required,
 171         bxeq    r5                      @  jump to the WFI code in SRAM
 172
 173
 174         /* Otherwise fall through to the save context code */
 175 save_context_wfi:
 176         /*
 177          * jump out to kernel flush routine
 178          *  - reuse that code is better
 179          *  - it executes in a cached space so is faster than refetch per-block
 180          *  - should be faster and will change with kernel
 181          *  - 'might' have to copy address, load and jump to it
 182          * Flush all data from the L1 data cache before disabling
 183          * SCTLR.C bit.
 184          */
 185         ldr     r1, kernel_flush
 186         mov     lr, pc
 187         bx      r1
 188
 189         /*
 190          * Clear the SCTLR.C bit to prevent further data cache
 191          * allocation. Clearing SCTLR.C would make all the data accesses
 192          * strongly ordered and would not hit the cache.
 193          */
 194         mrc     p15, 0, r0, c1, c0, 0
 195         bic     r0, r0, #(1 << 2)       @ Disable the C bit
 196         mcr     p15, 0, r0, c1, c0, 0
 197         isb
 198
 199         /*
 200          * Invalidate L1 data cache. Even though only invalidate is
 201          * necessary exported flush API is used here. Doing clean
 202          * on already clean cache would be almost NOP.
 203          */
 204         ldr     r1, kernel_flush
 205         blx     r1
 206         b       omap3_do_wfi
 207 ENDPROC(omap34xx_cpu_suspend)
 208 omap3_do_wfi_sram_addr:
 209         .word omap3_do_wfi_sram
 210 kernel_flush:
 211         .word v7_flush_dcache_all
 212
 213 /* ===================================
 214  * == WFI instruction => Enter idle ==
 215  * ===================================
 216  */
 217
 218 /*
 219  * Do WFI instruction
 220  * Includes the resume path for non-OFF modes
 221  *
 222  * This code gets copied to internal SRAM and is accessible
 223  * from both SDRAM and SRAM:
 224  * - executed from SRAM for non-off modes (omap3_do_wfi_sram),
 225  * - executed from SDRAM for OFF mode (omap3_do_wfi).
 226  */
 227         .align  3
 228 ENTRY(omap3_do_wfi)
 229         ldr     r4, sdrc_power          @ read the SDRC_POWER register
 230         ldr     r5, [r4]                @ read the contents of SDRC_POWER
 231         orr     r5, r5, #0x40           @ enable self refresh on idle req
 232         str     r5, [r4]                @ write back to SDRC_POWER register
 233
 234         /* Data memory barrier and Data sync barrier */
 235         dsb
 236         dmb
 237
 238 /*
 239  * ===================================
 240  * == WFI instruction => Enter idle ==
 241  * ===================================
 242  */
 243         wfi                             @ wait for interrupt
 244
 245 /*
 246  * ===================================
 247  * == Resume path for non-OFF modes ==
 248  * ===================================
 249  */
 250         nop
 251         nop
 252         nop
 253         nop
 254         nop
 255         nop
 256         nop
 257         nop
 258         nop
 259         nop
 260
 261 /*
 262  * This function implements the erratum ID i581 WA:
 263  *  SDRC state restore before accessing the SDRAM
 264  *
 265  * Only used at return from non-OFF mode. For OFF
 266  * mode the ROM code configures the SDRC and
 267  * the DPLL before calling the restore code directly
 268  * from DDR.
 269  */
 270
 271 /* Make sure SDRC accesses are ok */
 272 wait_sdrc_ok:
 273
 274 /* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
 275         ldr     r4, cm_idlest_ckgen
 276 wait_dpll3_lock:
 277         ldr     r5, [r4]
 278         tst     r5, #1
 279         beq     wait_dpll3_lock
 280
 281         ldr     r4, cm_idlest1_core
 282 wait_sdrc_ready:
 283         ldr     r5, [r4]
 284         tst     r5, #0x2
 285         bne     wait_sdrc_ready
 286         /* allow DLL powerdown upon hw idle req */
 287         ldr     r4, sdrc_power
 288         ldr     r5, [r4]
 289         bic     r5, r5, #0x40
 290         str     r5, [r4]
 291
 292 /*
 293  * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
 294  * base instead.
 295  * Be careful not to clobber r7 when maintaing this code.
 296  */
 297
 298 is_dll_in_lock_mode:
 299         /* Is dll in lock mode? */
 300         ldr     r4, sdrc_dlla_ctrl
 301         ldr     r5, [r4]
 302         tst     r5, #0x4
 303         bne     exit_nonoff_modes       @ Return if locked
 304         /* wait till dll locks */
 305         adr     r7, kick_counter
 306 wait_dll_lock_timed:
 307         ldr     r4, wait_dll_lock_counter
 308         add     r4, r4, #1
 309         str     r4, [r7, #wait_dll_lock_counter - kick_counter]
 310         ldr     r4, sdrc_dlla_status
 311         /* Wait 20uS for lock */
 312         mov     r6, #8
 313 wait_dll_lock:
 314         subs    r6, r6, #0x1
 315         beq     kick_dll
 316         ldr     r5, [r4]
 317         and     r5, r5, #0x4
 318         cmp     r5, #0x4
 319         bne     wait_dll_lock
 320         b       exit_nonoff_modes       @ Return when locked
 321
 322         /* disable/reenable DLL if not locked */
 323 kick_dll:
 324         ldr     r4, sdrc_dlla_ctrl
 325         ldr     r5, [r4]
 326         mov     r6, r5
 327         bic     r6, #(1<<3)             @ disable dll
 328         str     r6, [r4]
 329         dsb
 330         orr     r6, r6, #(1<<3)         @ enable dll
 331         str     r6, [r4]
 332         dsb
 333         ldr     r4, kick_counter
 334         add     r4, r4, #1
 335         str     r4, [r7]                @ kick_counter
 336         b       wait_dll_lock_timed
 337
 338 exit_nonoff_modes:
 339         /* Re-enable C-bit if needed */
 340         mrc     p15, 0, r0, c1, c0, 0
 341         tst     r0, #(1 << 2)           @ Check C bit enabled?
 342         orreq   r0, r0, #(1 << 2)       @ Enable the C bit if cleared
 343         mcreq   p15, 0, r0, c1, c0, 0
 344         isb
 345
 346 /*
 347  * ===================================
 348  * == Exit point from non-OFF modes ==
 349  * ===================================
 350  */
 351         ldmfd   sp!, {r4 - r11, pc}     @ restore regs and return
 352 ENDPROC(omap3_do_wfi)
 353 sdrc_power:
 354         .word   SDRC_POWER_V
 355 cm_idlest1_core:
 356         .word   CM_IDLEST1_CORE_V
 357 cm_idlest_ckgen:
 358         .word   CM_IDLEST_CKGEN_V
 359 sdrc_dlla_status:
 360         .word   SDRC_DLLA_STATUS_V
 361 sdrc_dlla_ctrl:
 362         .word   SDRC_DLLA_CTRL_V
 363         /*
 364          * When exporting to userspace while the counters are in SRAM,
 365          * these 2 words need to be at the end to facilitate retrival!
 366          */
 367 kick_counter:
 368         .word   0
 369 wait_dll_lock_counter:
 370         .word   0
 371
 372 ENTRY(omap3_do_wfi_sz)
 373         .word   . - omap3_do_wfi
 374
 375
 376 /*
 377  * ==============================
 378  * == Resume path for OFF mode ==
 379  * ==============================
 380  */
 381
 382 /*
 383  * The restore_* functions are called by the ROM code
 384  *  when back from WFI in OFF mode.
 385  * Cf. the get_*restore_pointer functions.
 386  *
 387  *  restore_es3: applies to 34xx >= ES3.0
 388  *  restore_3630: applies to 36xx
 389  *  restore: common code for 3xxx
 390  *
 391  * Note: when back from CORE and MPU OFF mode we are running
 392  *  from SDRAM, without MMU, without the caches and prediction.
 393  *  Also the SRAM content has been cleared.
 394  */
 395 ENTRY(omap3_restore_es3)
 396         ldr     r5, pm_prepwstst_core_p
 397         ldr     r4, [r5]
 398         and     r4, r4, #0x3
 399         cmp     r4, #0x0        @ Check if previous power state of CORE is OFF
 400         bne     omap3_restore   @ Fall through to OMAP3 common code
 401         adr     r0, es3_sdrc_fix
 402         ldr     r1, sram_base
 403         ldr     r2, es3_sdrc_fix_sz
 404         mov     r2, r2, ror #2
 405 copy_to_sram:
 406         ldmia   r0!, {r3}       @ val = *src
 407         stmia   r1!, {r3}       @ *dst = val
 408         subs    r2, r2, #0x1    @ num_words--
 409         bne     copy_to_sram
 410         ldr     r1, sram_base
 411         blx     r1
 412         b       omap3_restore   @ Fall through to OMAP3 common code
 413 ENDPROC(omap3_restore_es3)
 414
 415 ENTRY(omap3_restore_3630)
 416         ldr     r1, pm_prepwstst_core_p
 417         ldr     r2, [r1]
 418         and     r2, r2, #0x3
 419         cmp     r2, #0x0        @ Check if previous power state of CORE is OFF
 420         bne     omap3_restore   @ Fall through to OMAP3 common code
 421         /* Disable RTA before giving control */
 422         ldr     r1, control_mem_rta
 423         mov     r2, #OMAP36XX_RTA_DISABLE
 424         str     r2, [r1]
 425 ENDPROC(omap3_restore_3630)
 426
 427         /* Fall through to common code for the remaining logic */
 428
 429 ENTRY(omap3_restore)
 430         /*
 431          * Read the pwstctrl register to check the reason for mpu reset.
 432          * This tells us what was lost.
 433          */
 434         ldr     r1, pm_pwstctrl_mpu
 435         ldr     r2, [r1]
 436         and     r2, r2, #0x3
 437         cmp     r2, #0x0        @ Check if target power state was OFF or RET
 438         bne     logic_l1_restore
 439
 440         ldr     r0, l2dis_3630
 441         cmp     r0, #0x1        @ should we disable L2 on 3630?
 442         bne     skipl2dis
 443         mrc     p15, 0, r0, c1, c0, 1
 444         bic     r0, r0, #2      @ disable L2 cache
 445         mcr     p15, 0, r0, c1, c0, 1
 446 skipl2dis:
 447         ldr     r0, control_stat
 448         ldr     r1, [r0]
 449         and     r1, #0x700
 450         cmp     r1, #0x300
 451         beq     l2_inv_gp
 452         mov     r0, #40                 @ set service ID for PPA
 453         mov     r12, r0                 @ copy secure Service ID in r12
 454         mov     r1, #0                  @ set task id for ROM code in r1
 455         mov     r2, #4                  @ set some flags in r2, r6
 456         mov     r6, #0xff
 457         adr     r3, l2_inv_api_params   @ r3 points to dummy parameters
 458         dsb                             @ data write barrier
 459         dmb                             @ data memory barrier
 460         smc     #1                      @ call SMI monitor (smi #1)
 461         /* Write to Aux control register to set some bits */
 462         mov     r0, #42                 @ set service ID for PPA
 463         mov     r12, r0                 @ copy secure Service ID in r12
 464         mov     r1, #0                  @ set task id for ROM code in r1
 465         mov     r2, #4                  @ set some flags in r2, r6
 466         mov     r6, #0xff
 467         ldr     r4, scratchpad_base
 468         ldr     r3, [r4, #0xBC]         @ r3 points to parameters
 469         dsb                             @ data write barrier
 470         dmb                             @ data memory barrier
 471         smc     #1                      @ call SMI monitor (smi #1)
 472
 473 #ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 474         /* Restore L2 aux control register */
 475                                         @ set service ID for PPA
 476         mov     r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
 477         mov     r12, r0                 @ copy service ID in r12
 478         mov     r1, #0                  @ set task ID for ROM code in r1
 479         mov     r2, #4                  @ set some flags in r2, r6
 480         mov     r6, #0xff
 481         ldr     r4, scratchpad_base
 482         ldr     r3, [r4, #0xBC]
 483         adds    r3, r3, #8              @ r3 points to parameters
 484         dsb                             @ data write barrier
 485         dmb                             @ data memory barrier
 486         smc     #1                      @ call SMI monitor (smi #1)
 487 #endif
 488         b       logic_l1_restore
 489
 490         .align
 491 l2_inv_api_params:
 492         .word   0x1, 0x00
 493 l2_inv_gp:
 494         /* Execute smi to invalidate L2 cache */
 495         mov r12, #0x1                   @ set up to invalidate L2
 496         smc     #0                      @ Call SMI monitor (smieq)
 497         /* Write to Aux control register to set some bits */
 498         ldr     r4, scratchpad_base
 499         ldr     r3, [r4,#0xBC]
 500         ldr     r0, [r3,#4]
 501         mov     r12, #0x3
 502         smc     #0                      @ Call SMI monitor (smieq)
 503         ldr     r4, scratchpad_base
 504         ldr     r3, [r4,#0xBC]
 505         ldr     r0, [r3,#12]
 506         mov     r12, #0x2
 507         smc     #0                      @ Call SMI monitor (smieq)
 508 logic_l1_restore:
 509         ldr     r1, l2dis_3630
 510         cmp     r1, #0x1                @ Test if L2 re-enable needed on 3630
 511         bne     skipl2reen
 512         mrc     p15, 0, r1, c1, c0, 1
 513         orr     r1, r1, #2              @ re-enable L2 cache
 514         mcr     p15, 0, r1, c1, c0, 1
 515 skipl2reen:
 516
 517         /* Now branch to the common CPU resume function */
 518         b       cpu_resume
 519 ENDPROC(omap3_restore)
 520
 521         .ltorg
 522
 523 /*
 524  * Local variables
 525  */
 526 pm_prepwstst_core_p:
 527         .word   PM_PREPWSTST_CORE_P
 528 pm_pwstctrl_mpu:
 529         .word   PM_PWSTCTRL_MPU_P
 530 scratchpad_base:
 531         .word   SCRATCHPAD_BASE_P
 532 sram_base:
 533         .word   SRAM_BASE_P + 0x8000
 534 control_stat:
 535         .word   CONTROL_STAT
 536 control_mem_rta:
 537         .word   CONTROL_MEM_RTA_CTRL
 538 l2dis_3630:
 539         .word   0
 540
 541 /*
 542  * Internal functions
 543  */
 544
 545 /*
 546  * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0
 547  * Copied to and run from SRAM in order to reconfigure the SDRC parameters.
 548  */
 549         .text
 550         .align  3
 551 ENTRY(es3_sdrc_fix)
 552         ldr     r4, sdrc_syscfg         @ get config addr
 553         ldr     r5, [r4]                @ get value
 554         tst     r5, #0x100              @ is part access blocked
 555         it      eq
 556         biceq   r5, r5, #0x100          @ clear bit if set
 557         str     r5, [r4]                @ write back change
 558         ldr     r4, sdrc_mr_0           @ get config addr
 559         ldr     r5, [r4]                @ get value
 560         str     r5, [r4]                @ write back change
 561         ldr     r4, sdrc_emr2_0         @ get config addr
 562         ldr     r5, [r4]                @ get value
 563         str     r5, [r4]                @ write back change
 564         ldr     r4, sdrc_manual_0       @ get config addr
 565         mov     r5, #0x2                @ autorefresh command
 566         str     r5, [r4]                @ kick off refreshes
 567         ldr     r4, sdrc_mr_1           @ get config addr
 568         ldr     r5, [r4]                @ get value
 569         str     r5, [r4]                @ write back change
 570         ldr     r4, sdrc_emr2_1         @ get config addr
 571         ldr     r5, [r4]                @ get value
 572         str     r5, [r4]                @ write back change
 573         ldr     r4, sdrc_manual_1       @ get config addr
 574         mov     r5, #0x2                @ autorefresh command
 575         str     r5, [r4]                @ kick off refreshes
 576         bx      lr
 577
 578 /*
 579  * Local variables
 580  */
 581         .align
 582 sdrc_syscfg:
 583         .word   SDRC_SYSCONFIG_P
 584 sdrc_mr_0:
 585         .word   SDRC_MR_0_P
 586 sdrc_emr2_0:
 587         .word   SDRC_EMR2_0_P
 588 sdrc_manual_0:
 589         .word   SDRC_MANUAL_0_P
 590 sdrc_mr_1:
 591         .word   SDRC_MR_1_P
 592 sdrc_emr2_1:
 593         .word   SDRC_EMR2_1_P
 594 sdrc_manual_1:
 595         .word   SDRC_MANUAL_1_P
 596 ENDPROC(es3_sdrc_fix)
 597 ENTRY(es3_sdrc_fix_sz)
 598         .word   . - es3_sdrc_fix