Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
[deliverable/linux.git] / arch / arm / mach-omap2 / sram.c
1 /*
2 *
3 * OMAP SRAM detection and management
4 *
5 * Copyright (C) 2005 Nokia Corporation
6 * Written by Tony Lindgren <tony@atomide.com>
7 *
8 * Copyright (C) 2009-2012 Texas Instruments
9 * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16 #include <linux/module.h>
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/io.h>
20
21 #include <asm/fncpy.h>
22 #include <asm/tlb.h>
23 #include <asm/cacheflush.h>
24
25 #include <asm/mach/map.h>
26
27 #include "soc.h"
28 #include "iomap.h"
29 #include "prm2xxx_3xxx.h"
30 #include "sdrc.h"
31 #include "sram.h"
32
33 #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
34 #define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
35
36 #define SRAM_BOOTLOADER_SZ 0x00
37
38 #define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
39 #define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
40 #define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
41
42 #define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
43 #define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
44 #define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
45 #define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
46 #define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
47
48 #define GP_DEVICE 0x300
49
50 #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
51
52 static unsigned long omap_sram_start;
53 static unsigned long omap_sram_skip;
54 static unsigned long omap_sram_size;
55
56 /*
57 * Depending on the target RAMFS firewall setup, the public usable amount of
58 * SRAM varies. The default accessible size for all device types is 2k. A GP
59 * device allows ARM11 but not other initiators for full size. This
60 * functionality seems ok until some nice security API happens.
61 */
62 static int is_sram_locked(void)
63 {
64 if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
65 /* RAMFW: R/W access to all initiators for all qualifier sets */
66 if (cpu_is_omap242x()) {
67 writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
68 writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
69 writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
70 }
71 if (cpu_is_omap34xx()) {
72 writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
73 writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
74 writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
75 writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2);
76 writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
77 }
78 return 0;
79 } else
80 return 1; /* assume locked with no PPA or security driver */
81 }
82
83 /*
84 * The amount of SRAM depends on the core type.
85 * Note that we cannot try to test for SRAM here because writes
86 * to secure SRAM will hang the system. Also the SRAM is not
87 * yet mapped at this point.
88 */
89 static void __init omap_detect_sram(void)
90 {
91 omap_sram_skip = SRAM_BOOTLOADER_SZ;
92 if (is_sram_locked()) {
93 if (cpu_is_omap34xx()) {
94 omap_sram_start = OMAP3_SRAM_PUB_PA;
95 if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
96 (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
97 omap_sram_size = 0x7000; /* 28K */
98 omap_sram_skip += SZ_16K;
99 } else {
100 omap_sram_size = 0x8000; /* 32K */
101 }
102 } else {
103 omap_sram_start = OMAP2_SRAM_PUB_PA;
104 omap_sram_size = 0x800; /* 2K */
105 }
106 } else {
107 if (cpu_is_omap34xx()) {
108 omap_sram_start = OMAP3_SRAM_PA;
109 omap_sram_size = 0x10000; /* 64K */
110 } else {
111 omap_sram_start = OMAP2_SRAM_PA;
112 if (cpu_is_omap242x())
113 omap_sram_size = 0xa0000; /* 640K */
114 else if (cpu_is_omap243x())
115 omap_sram_size = 0x10000; /* 64K */
116 }
117 }
118 }
119
120 /*
121 * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
122 */
123 static void __init omap2_map_sram(void)
124 {
125 int cached = 1;
126
127 if (cpu_is_omap34xx()) {
128 /*
129 * SRAM must be marked as non-cached on OMAP3 since the
130 * CORE DPLL M2 divider change code (in SRAM) runs with the
131 * SDRAM controller disabled, and if it is marked cached,
132 * the ARM may attempt to write cache lines back to SDRAM
133 * which will cause the system to hang.
134 */
135 cached = 0;
136 }
137
138 omap_map_sram(omap_sram_start, omap_sram_size,
139 omap_sram_skip, cached);
140 }
141
142 static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
143 u32 base_cs, u32 force_unlock);
144
145 void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
146 u32 base_cs, u32 force_unlock)
147 {
148 BUG_ON(!_omap2_sram_ddr_init);
149 _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
150 base_cs, force_unlock);
151 }
152
153 static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
154 u32 mem_type);
155
156 void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
157 {
158 BUG_ON(!_omap2_sram_reprogram_sdrc);
159 _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
160 }
161
162 static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
163
164 u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
165 {
166 BUG_ON(!_omap2_set_prcm);
167 return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
168 }
169
170 #ifdef CONFIG_SOC_OMAP2420
171 static int __init omap242x_sram_init(void)
172 {
173 _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
174 omap242x_sram_ddr_init_sz);
175
176 _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
177 omap242x_sram_reprogram_sdrc_sz);
178
179 _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
180 omap242x_sram_set_prcm_sz);
181
182 return 0;
183 }
184 #else
185 static inline int omap242x_sram_init(void)
186 {
187 return 0;
188 }
189 #endif
190
191 #ifdef CONFIG_SOC_OMAP2430
192 static int __init omap243x_sram_init(void)
193 {
194 _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
195 omap243x_sram_ddr_init_sz);
196
197 _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
198 omap243x_sram_reprogram_sdrc_sz);
199
200 _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
201 omap243x_sram_set_prcm_sz);
202
203 return 0;
204 }
205 #else
206 static inline int omap243x_sram_init(void)
207 {
208 return 0;
209 }
210 #endif
211
212 #ifdef CONFIG_ARCH_OMAP3
213
214 void omap3_sram_restore_context(void)
215 {
216 omap_sram_reset();
217
218 omap_push_sram_idle();
219 }
220
221 static inline int omap34xx_sram_init(void)
222 {
223 omap3_sram_restore_context();
224 return 0;
225 }
226 #else
227 static inline int omap34xx_sram_init(void)
228 {
229 return 0;
230 }
231 #endif /* CONFIG_ARCH_OMAP3 */
232
233 int __init omap_sram_init(void)
234 {
235 omap_detect_sram();
236 omap2_map_sram();
237
238 if (cpu_is_omap242x())
239 omap242x_sram_init();
240 else if (cpu_is_omap2430())
241 omap243x_sram_init();
242 else if (cpu_is_omap34xx())
243 omap34xx_sram_init();
244
245 return 0;
246 }
This page took 0.03823 seconds and 5 git commands to generate.