5406b08463b626b98ab733fe7b730597a4f1e8f0
[deliverable/linux.git] / arch / arm / mach-omap2 / vp.h
1 /*
2 * OMAP3/4 Voltage Processor (VP) structure and macro definitions
3 *
4 * Copyright (C) 2007, 2010 Texas Instruments, Inc.
5 * Rajendra Nayak <rnayak@ti.com>
6 * Lesly A M <x0080970@ti.com>
7 * Thara Gopinath <thara@ti.com>
8 *
9 * Copyright (C) 2008, 2011 Nokia Corporation
10 * Kalle Jokiniemi
11 * Paul Walmsley
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License version
15 * 2 as published by the Free Software Foundation.
16 */
17 #ifndef __ARCH_ARM_MACH_OMAP2_VP_H
18 #define __ARCH_ARM_MACH_OMAP2_VP_H
19
20 #include <linux/kernel.h>
21
22 /* XXX document */
23 #define VP_IDLE_TIMEOUT 200
24 #define VP_TRANXDONE_TIMEOUT 300
25
26
27 /**
28 * struct omap_vp_common_data - register data common to all VDDs
29 * @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg
30 * @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg
31 * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
32 * @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg
33 * @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg
34 * @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg
35 * @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg
36 * @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg
37 * @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg
38 * @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
39 * @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
40 * @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
41 * @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
42 * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
43 * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
44 * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
45 * @prm_mod: PRM module id used for PRM register access
46 *
47 * XXX It it not necessary to have both a mask and a shift for the same
48 * bitfield - remove one
49 * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix!
50 */
51 struct omap_vp_common_data {
52 u32 vpconfig_errorgain_mask;
53 u32 vpconfig_initvoltage_mask;
54 u32 vpconfig_timeouten;
55 u32 vpconfig_initvdd;
56 u32 vpconfig_forceupdate;
57 u32 vpconfig_vpenable;
58 s16 prm_mod;
59 u8 vpconfig_erroroffset_shift;
60 u8 vpconfig_errorgain_shift;
61 u8 vpconfig_initvoltage_shift;
62 u8 vstepmin_stepmin_shift;
63 u8 vstepmin_smpswaittimemin_shift;
64 u8 vstepmax_stepmax_shift;
65 u8 vstepmax_smpswaittimemax_shift;
66 u8 vlimitto_vddmin_shift;
67 u8 vlimitto_vddmax_shift;
68 u8 vlimitto_timeout_shift;
69 };
70
71 /**
72 * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data
73 * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
74 *
75 * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a
76 * hardware bug
77 * XXX This structure is probably not needed
78 */
79 struct omap_vp_prm_irqst_data {
80 u32 tranxdone_status;
81 };
82
83 /**
84 * struct omap_vp_instance_data - VP register offsets (per-VDD)
85 * @vp_common: pointer to struct omap_vp_common_data * for this SoC
86 * @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD
87 * @vpconfig: PRM_VP*_CONFIG reg offset from PRM start
88 * @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start
89 * @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start
90 * @vstatus: PRM_VP*_VSTATUS reg offset from PRM start
91 * @voltage: PRM_VP*_VOLTAGE reg offset from PRM start
92 *
93 * XXX vp_common is probably not needed since it is per-SoC
94 */
95 struct omap_vp_instance_data {
96 const struct omap_vp_common_data *vp_common;
97 const struct omap_vp_prm_irqst_data *prm_irqst_data;
98 u8 vpconfig;
99 u8 vstepmin;
100 u8 vstepmax;
101 u8 vlimitto;
102 u8 vstatus;
103 u8 voltage;
104 };
105
106 /**
107 * struct omap_vp_runtime_data - VP data populated at runtime by code
108 * @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG
109 * @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG
110 * @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN
111 * @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX
112 * @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO
113 * @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN
114 * @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX
115 * @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO
116 * @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO
117 *
118 * XXX Is this structure really needed? Why not just program the
119 * device directly? They are in PRM space, therefore in the WKUP
120 * powerdomain, so register contents should not be lost in off-mode.
121 * XXX Some of these fields are incorrectly named, e.g., vstep*
122 */
123 struct omap_vp_runtime_data {
124 u32 vpconfig_erroroffset;
125 u16 vpconfig_errorgain;
126 u16 vstepmin_smpswaittimemin;
127 u16 vstepmax_smpswaittimemax;
128 u16 vlimitto_timeout;
129 u8 vstepmin_stepmin;
130 u8 vstepmax_stepmax;
131 u8 vlimitto_vddmin;
132 u8 vlimitto_vddmax;
133 };
134
135 extern struct omap_vp_instance_data omap3_vp1_data;
136 extern struct omap_vp_instance_data omap3_vp2_data;
137
138 extern struct omap_vp_instance_data omap4_vp_mpu_data;
139 extern struct omap_vp_instance_data omap4_vp_iva_data;
140 extern struct omap_vp_instance_data omap4_vp_core_data;
141
142 #endif
This page took 0.032363 seconds and 5 git commands to generate.