arch/arm/mach-pxa/Kconfig

   1 if ARCH_PXA
   2
   3 menu "Intel PXA2xx/PXA3xx Implementations"
   4
   5 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
   6
   7 config MACH_PXA3XX_DT
   8         bool "Support PXA3xx platforms from device tree"
   9         select CPU_PXA300
  10         select HAVE_PWM
  11         select POWER_SUPPLY
  12         select PXA3xx
  13         select USE_OF
  14         help
  15           Include support for Marvell PXA3xx based platforms using
  16           the device tree. Needn't select any other machine while
  17           MACH_PXA3XX_DT is enabled.
  18
  19 config ARCH_LUBBOCK
  20         bool "Intel DBPXA250 Development Platform (aka Lubbock)"
  21         select PXA25x
  22         select SA1111
  23
  24 config MACH_MAINSTONE
  25         bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
  26         select HAVE_PWM
  27         select PXA27x
  28
  29 config MACH_ZYLONITE
  30         bool
  31         select HAVE_PWM
  32         select PXA3xx
  33
  34 config MACH_ZYLONITE300
  35         bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
  36         select CPU_PXA300
  37         select CPU_PXA310
  38         select MACH_ZYLONITE
  39
  40 config MACH_ZYLONITE320
  41         bool "PXA3xx Development Platform (aka Zylonite) PXA320"
  42         select CPU_PXA320
  43         select MACH_ZYLONITE
  44
  45 config MACH_LITTLETON
  46         bool "PXA3xx Form Factor Platform (aka Littleton)"
  47         select CPU_PXA300
  48         select CPU_PXA310
  49         select PXA3xx
  50
  51 config MACH_TAVOREVB
  52         bool "PXA930 Evaluation Board (aka TavorEVB)"
  53         select CPU_PXA930
  54         select PXA3xx
  55
  56 config MACH_SAAR
  57         bool "PXA930 Handheld Platform (aka SAAR)"
  58         select CPU_PXA930
  59         select PXA3xx
  60
  61 comment "Third Party Dev Platforms (sorted by vendor name)"
  62
  63 config ARCH_PXA_IDP
  64         bool "Accelent Xscale IDP"
  65         select PXA25x
  66
  67 config ARCH_VIPER
  68         bool "Arcom/Eurotech VIPER SBC"
  69         select ARCOM_PCMCIA
  70         select HAVE_PWM
  71         select I2C_GPIO
  72         select ISA
  73         select PXA25x
  74         select PXA_HAVE_ISA_IRQS
  75
  76 config MACH_ARCOM_ZEUS
  77         bool "Arcom/Eurotech ZEUS SBC"
  78         select ARCOM_PCMCIA
  79         select ISA
  80         select PXA27x
  81         select PXA_HAVE_ISA_IRQS
  82
  83 config MACH_BALLOON3
  84         bool "Balloon 3 board"
  85         select IWMMXT
  86         select PXA27x
  87
  88 config MACH_CSB726
  89         bool "Enable Cogent CSB726 System On a Module"
  90         select IWMMXT
  91         select PXA27x
  92         help
  93           Say Y here if you intend to run this kernel on a Cogent
  94           CSB726 System On Module.
  95
  96 config CSB726_CSB701
  97         bool "Enable support for CSB701 baseboard"
  98         depends on MACH_CSB726
  99
 100 config MACH_ARMCORE
 101         bool "CompuLab CM-X255/CM-X270 modules"
 102         select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
 103         select IWMMXT
 104         select MIGHT_HAVE_PCI
 105         select NEED_MACH_IO_H if PCI
 106         select PXA25x
 107         select PXA27x
 108
 109 config MACH_EM_X270
 110         bool "CompuLab EM-x270 platform"
 111         select PXA27x
 112
 113 config MACH_EXEDA
 114         bool "CompuLab eXeda platform"
 115         select PXA27x
 116
 117 config MACH_CM_X300
 118         bool "CompuLab CM-X300 modules"
 119         select CPU_PXA300
 120         select CPU_PXA310
 121         select HAVE_PWM
 122         select PXA3xx
 123
 124 config MACH_CAPC7117
 125         bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
 126         select CPU_PXA320
 127         select PXA3xx
 128
 129 config ARCH_GUMSTIX
 130         bool "Gumstix XScale 255 boards"
 131         select PXA25x
 132         help
 133           Say Y here if you intend to run this kernel on
 134           Basix, Connex, ws-200ax, ws-400ax systems
 135
 136 choice
 137         prompt "Gumstix Carrier/Expansion Board"
 138         depends on ARCH_GUMSTIX
 139
 140 config GUMSTIX_AM200EPD
 141         bool "Enable AM200EPD board support"
 142
 143 config GUMSTIX_AM300EPD
 144         bool "Enable AM300EPD board support"
 145
 146 endchoice
 147
 148 config MACH_INTELMOTE2
 149         bool "Intel Mote 2 Platform"
 150         select IWMMXT
 151         select PXA27x
 152
 153 config MACH_STARGATE2
 154         bool "Intel Stargate 2 Platform"
 155         select IWMMXT
 156         select PXA27x
 157
 158 config MACH_XCEP
 159         bool "Iskratel Electronics XCEP"
 160         select MTD
 161         select MTD_CFI
 162         select MTD_CFI_INTELEXT
 163         select MTD_CHAR
 164         select MTD_PHYSMAP
 165         select PXA25x
 166         select SMC91X
 167         help
 168           PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 169           Tuned for usage in Libera instruments for particle accelerators.
 170
 171 config TRIZEPS_PXA
 172         bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 173
 174 config MACH_TRIZEPS4
 175         bool "Keith und Koep Trizeps4 DIMM-Module"
 176         depends on TRIZEPS_PXA
 177         select PXA27x
 178         select TRIZEPS_PCMCIA
 179
 180 config MACH_TRIZEPS4WL
 181         bool "Keith und Koep Trizeps4-WL DIMM-Module"
 182         depends on TRIZEPS_PXA
 183         select PXA27x
 184         select TRIZEPS_PCMCIA
 185
 186 choice
 187         prompt "Select base board for Trizeps module"
 188         depends on TRIZEPS_PXA
 189
 190 config MACH_TRIZEPS_CONXS
 191         bool "ConXS Eval Board"
 192
 193 config MACH_TRIZEPS_UCONXS
 194         bool "uConXS Eval Board"
 195
 196 config MACH_TRIZEPS_ANY
 197         bool "another Board"
 198
 199 endchoice
 200
 201 config ARCOM_PCMCIA
 202         bool
 203         help
 204           Generic option for Arcom Viper/Zeus PCMCIA
 205
 206 config TRIZEPS_PCMCIA
 207         bool
 208         help
 209           Enable PCMCIA support for Trizeps modules
 210
 211 config MACH_LOGICPD_PXA270
 212         bool "LogicPD PXA270 Card Engine Development Platform"
 213         select HAVE_PWM
 214         select PXA27x
 215
 216 config MACH_PCM027
 217         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 218         select IWMMXT
 219         select PXA27x
 220
 221 config MACH_PCM990_BASEBOARD
 222         bool "PHYTEC PCM-990 development board"
 223         depends on MACH_PCM027
 224         select HAVE_PWM
 225
 226 choice
 227         prompt "display on pcm990"
 228         depends on MACH_PCM990_BASEBOARD
 229
 230 config PCM990_DISPLAY_SHARP
 231         bool "sharp lq084v1dg21 stn display"
 232
 233 config PCM990_DISPLAY_NEC
 234         bool "nec nl6448bc20_18d tft display"
 235
 236 config PCM990_DISPLAY_NONE
 237         bool "no display"
 238
 239 endchoice
 240
 241 config MACH_COLIBRI
 242         bool "Toradex Colibri PXA270"
 243         select PXA27x
 244
 245 config MACH_COLIBRI_PXA270_INCOME
 246         bool "Income s.r.o. PXA270 SBC"
 247         depends on MACH_COLIBRI
 248         select HAVE_PWM
 249         select PXA27x
 250
 251 config MACH_COLIBRI300
 252         bool "Toradex Colibri PXA300/310"
 253         select CPU_PXA300
 254         select CPU_PXA310
 255         select PXA3xx
 256
 257 config MACH_COLIBRI320
 258         bool "Toradex Colibri PXA320"
 259         select CPU_PXA320
 260         select PXA3xx
 261
 262 config MACH_COLIBRI_EVALBOARD
 263         bool "Toradex Colibri Evaluation Carrier Board support"
 264         depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
 265
 266 config MACH_VPAC270
 267         bool "Voipac PXA270"
 268         select HAVE_PATA_PLATFORM
 269         select PXA27x
 270         help
 271           PXA270 based Single Board Computer.
 272
 273 comment "End-user Products (sorted by vendor name)"
 274
 275 config MACH_H4700
 276         bool "HP iPAQ hx4700"
 277         select HAVE_PWM
 278         select IWMMXT
 279         select PXA27x
 280
 281 config MACH_H5000
 282         bool "HP iPAQ h5000"
 283         select PXA25x
 284
 285 config MACH_HIMALAYA
 286         bool "HTC Himalaya Support"
 287         select CPU_PXA26x
 288
 289 config MACH_MAGICIAN
 290         bool "Enable HTC Magician Support"
 291         select HAVE_PWM
 292         select IWMMXT
 293         select PXA27x
 294
 295 config MACH_MIOA701
 296         bool "Mitac Mio A701 Support"
 297         select GPIO_SYSFS
 298         select HAVE_PWM
 299         select IWMMXT
 300         select PXA27x
 301         help
 302           Say Y here if you intend to run this kernel on a
 303           MIO A701. Currently there is only basic support
 304           for this PDA.
 305
 306 config PXA_EZX
 307         bool "Motorola EZX Platform"
 308         select HAVE_PWM
 309         select IWMMXT
 310         select PXA27x
 311
 312 config MACH_EZX_A780
 313         bool "Motorola EZX A780"
 314         default y
 315         depends on PXA_EZX
 316
 317 config MACH_EZX_E680
 318         bool "Motorola EZX E680"
 319         default y
 320         depends on PXA_EZX
 321
 322 config MACH_EZX_A1200
 323         bool "Motorola EZX A1200"
 324         default y
 325         depends on PXA_EZX
 326
 327 config MACH_EZX_A910
 328         bool "Motorola EZX A910"
 329         default y
 330         depends on PXA_EZX
 331
 332 config MACH_EZX_E6
 333         bool "Motorola EZX E6"
 334         default y
 335         depends on PXA_EZX
 336
 337 config MACH_EZX_E2
 338         bool "Motorola EZX E2"
 339         default y
 340         depends on PXA_EZX
 341
 342 config MACH_MP900C
 343         bool "Nec Mobilepro 900/c"
 344         select PXA25x
 345
 346 config ARCH_PXA_PALM
 347         bool "PXA based Palm PDAs"
 348         select HAVE_PWM
 349
 350 config MACH_PALM27X
 351         bool
 352
 353 config MACH_PALMTE2
 354         bool "Palm Tungsten|E2"
 355         default y
 356         depends on ARCH_PXA_PALM
 357         select PXA25x
 358         help
 359           Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 360           handheld computer.
 361
 362 config MACH_PALMTC
 363         bool "Palm Tungsten|C"
 364         default y
 365         depends on ARCH_PXA_PALM
 366         select PXA25x
 367         help
 368           Say Y here if you intend to run this kernel on a Palm Tungsten|C
 369           handheld computer.
 370
 371 config MACH_PALMT5
 372         bool "Palm Tungsten|T5"
 373         default y
 374         depends on ARCH_PXA_PALM
 375         select IWMMXT
 376         select MACH_PALM27X
 377         select PXA27x
 378         help
 379           Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 380           handheld computer.
 381
 382 config MACH_PALMTX
 383         bool "Palm T|X"
 384         default y
 385         depends on ARCH_PXA_PALM
 386         select IWMMXT
 387         select MACH_PALM27X
 388         select PXA27x
 389         help
 390           Say Y here if you intend to run this kernel on a Palm T|X
 391           handheld computer.
 392
 393 config MACH_PALMZ72
 394         bool "Palm Zire 72"
 395         default y
 396         depends on ARCH_PXA_PALM
 397         select IWMMXT
 398         select MACH_PALM27X
 399         select PXA27x
 400         help
 401           Say Y here if you intend to run this kernel on Palm Zire 72
 402           handheld computer.
 403
 404 config MACH_PALMLD
 405         bool "Palm LifeDrive"
 406         default y
 407         depends on ARCH_PXA_PALM
 408         select IWMMXT
 409         select MACH_PALM27X
 410         select PXA27x
 411         help
 412           Say Y here if you intend to run this kernel on a Palm LifeDrive
 413           handheld computer.
 414
 415 config PALM_TREO
 416         bool
 417         depends on ARCH_PXA_PALM
 418
 419 config MACH_CENTRO
 420         bool "Palm Centro 685 (GSM)"
 421         default y
 422         depends on ARCH_PXA_PALM
 423         select IWMMXT
 424         select MACH_PALM27X
 425         select PALM_TREO
 426         select PXA27x
 427         help
 428           Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 429           smartphone.
 430
 431 config MACH_TREO680
 432         bool "Palm Treo 680"
 433         default y
 434         depends on ARCH_PXA_PALM
 435         select IWMMXT
 436         select MACH_PALM27X
 437         select PALM_TREO
 438         select PXA27x
 439         help
 440           Say Y here if you intend to run this kernel on Palm Treo 680
 441           smartphone.
 442
 443 config MACH_RAUMFELD_RC
 444         bool "Raumfeld Controller"
 445         select CPU_PXA300
 446         select HAVE_PWM
 447         select POWER_SUPPLY
 448         select PXA3xx
 449
 450 config MACH_RAUMFELD_CONNECTOR
 451         bool "Raumfeld Connector"
 452         select CPU_PXA300
 453         select POWER_SUPPLY
 454         select PXA3xx
 455
 456 config MACH_RAUMFELD_SPEAKER
 457         bool "Raumfeld Speaker"
 458         select CPU_PXA300
 459         select POWER_SUPPLY
 460         select PXA3xx
 461
 462 config PXA_SHARPSL
 463         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 464         select SHARP_PARAM
 465         select SHARP_SCOOP
 466         help
 467           Say Y here if you intend to run this kernel on a
 468           Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
 469           SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
 470           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 471           handheld computer.
 472
 473 config PXA_SHARPSL_DETECT_MACH_ID
 474         bool "Detect machine ID at run-time in the decompressor"
 475         depends on PXA_SHARPSL
 476         help
 477           Say Y here if you want the zImage decompressor to detect
 478           the Zaurus machine ID at run-time. For latest kexec-based
 479           boot loader, this is not necessary.
 480
 481 config MACH_POODLE
 482         bool "Enable Sharp SL-5600 (Poodle) Support"
 483         depends on PXA_SHARPSL
 484         select PXA25x
 485         select SHARP_LOCOMO
 486
 487 config MACH_CORGI
 488         bool "Enable Sharp SL-C700 (Corgi) Support"
 489         depends on PXA_SHARPSL
 490         select PXA25x
 491         select PXA_SHARP_C7xx
 492
 493 config MACH_SHEPHERD
 494         bool "Enable Sharp SL-C750 (Shepherd) Support"
 495         depends on PXA_SHARPSL
 496         select PXA25x
 497         select PXA_SHARP_C7xx
 498
 499 config MACH_HUSKY
 500         bool "Enable Sharp SL-C760 (Husky) Support"
 501         depends on PXA_SHARPSL
 502         select PXA25x
 503         select PXA_SHARP_C7xx
 504
 505 config MACH_AKITA
 506         bool "Enable Sharp SL-1000 (Akita) Support"
 507         depends on PXA_SHARPSL
 508         select I2C
 509         select I2C_PXA
 510         select MACH_SPITZ
 511         select PXA27x
 512         select PXA_SHARP_Cxx00
 513
 514 config MACH_SPITZ
 515         bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 516         depends on PXA_SHARPSL
 517         select PXA27x
 518         select PXA_SHARP_Cxx00
 519
 520 config MACH_BORZOI
 521         bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
 522         depends on PXA_SHARPSL
 523         select PXA27x
 524         select PXA_SHARP_Cxx00
 525
 526 config MACH_TOSA
 527         bool "Enable Sharp SL-6000x (Tosa) Support"
 528         depends on PXA_SHARPSL
 529         select PXA25x
 530
 531 config TOSA_BT
 532         tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 533         depends on MACH_TOSA
 534         select RFKILL
 535         help
 536           This is a simple driver that is able to control
 537           the state of built in bluetooth chip on tosa.
 538
 539 config TOSA_USE_EXT_KEYCODES
 540         bool "Tosa keyboard: use extended keycodes"
 541         depends on MACH_TOSA
 542         default n
 543         help
 544           Say Y here to enable the tosa keyboard driver to generate extended
 545           (>= 127) keycodes. Be aware, that they can't be correctly interpreted
 546           by either console keyboard driver or by Kdrive keybd driver.
 547
 548           Say Y only if you know, what you are doing!
 549
 550 config MACH_ICONTROL
 551         bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
 552         select CPU_PXA320
 553         select PXA3xx
 554
 555 config ARCH_PXA_ESERIES
 556         bool "PXA based Toshiba e-series PDAs"
 557         select FB_W100
 558         select PXA25x
 559
 560 config MACH_E330
 561         bool "Toshiba e330"
 562         default y
 563         depends on ARCH_PXA_ESERIES
 564         help
 565           Say Y here if you intend to run this kernel on a Toshiba
 566           e330 family PDA.
 567
 568 config MACH_E350
 569         bool "Toshiba e350"
 570         default y
 571         depends on ARCH_PXA_ESERIES
 572         help
 573           Say Y here if you intend to run this kernel on a Toshiba
 574           e350 family PDA.
 575
 576 config MACH_E740
 577         bool "Toshiba e740"
 578         default y
 579         depends on ARCH_PXA_ESERIES
 580         help
 581           Say Y here if you intend to run this kernel on a Toshiba
 582           e740 family PDA.
 583
 584 config MACH_E750
 585         bool "Toshiba e750"
 586         default y
 587         depends on ARCH_PXA_ESERIES
 588         help
 589           Say Y here if you intend to run this kernel on a Toshiba
 590           e750 family PDA.
 591
 592 config MACH_E400
 593         bool "Toshiba e400"
 594         default y
 595         depends on ARCH_PXA_ESERIES
 596         help
 597           Say Y here if you intend to run this kernel on a Toshiba
 598           e400 family PDA.
 599
 600 config MACH_E800
 601         bool "Toshiba e800"
 602         default y
 603         depends on ARCH_PXA_ESERIES
 604         help
 605           Say Y here if you intend to run this kernel on a Toshiba
 606           e800 family PDA.
 607
 608 config MACH_ZIPIT2
 609         bool "Zipit Z2 Handheld"
 610         select HAVE_PWM
 611         select PXA27x
 612 endmenu
 613
 614 config PXA25x
 615         bool
 616         select CPU_XSCALE
 617         help
 618           Select code specific to PXA21x/25x/26x variants
 619
 620 config PXA27x
 621         bool
 622         select CPU_XSCALE
 623         help
 624           Select code specific to PXA27x variants
 625
 626 config CPU_PXA26x
 627         bool
 628         select PXA25x
 629         help
 630           Select code specific to PXA26x (codename Dalhart)
 631
 632 config PXA3xx
 633         bool
 634         select CPU_XSC3
 635         help
 636           Select code specific to PXA3xx variants
 637
 638 config CPU_PXA300
 639         bool
 640         select PXA3xx
 641         help
 642           PXA300 (codename Monahans-L)
 643
 644 config CPU_PXA310
 645         bool
 646         select CPU_PXA300
 647         select PXA310_ULPI if USB_ULPI
 648         help
 649           PXA310 (codename Monahans-LV)
 650
 651 config CPU_PXA320
 652         bool
 653         select PXA3xx
 654         help
 655           PXA320 (codename Monahans-P)
 656
 657 config CPU_PXA930
 658         bool
 659         select PXA3xx
 660         help
 661           PXA930 (codename Tavor-P)
 662
 663 config CPU_PXA935
 664         bool
 665         select CPU_PXA930
 666         help
 667           PXA935 (codename Tavor-P65)
 668
 669 config PXA_SHARP_C7xx
 670         bool
 671         select SHARPSL_PM
 672         help
 673           Enable support for all Sharp C7xx models
 674
 675 config PXA_SHARP_Cxx00
 676         bool
 677         select SHARPSL_PM
 678         help
 679           Enable common support for Sharp Cxx00 models
 680
 681 config SHARPSL_PM
 682         bool
 683         select APM_EMULATION
 684         select SHARPSL_PM_MAX1111
 685
 686 config SHARPSL_PM_MAX1111
 687         bool
 688         select HWMON
 689         select SENSORS_MAX1111
 690         select SPI
 691         select SPI_MASTER
 692
 693 config PXA_HAVE_ISA_IRQS
 694         bool
 695
 696 config PXA310_ULPI
 697         bool
 698
 699 endif