arch/arm/mach-pxa/Kconfig

   1 if ARCH_PXA
   2
   3 menu "Intel PXA2xx/PXA3xx Implementations"
   4
   5 if PXA3xx
   6
   7 menu "Supported PXA3xx Processor Variants"
   8
   9 config CPU_PXA300
  10         bool "PXA300 (codename Monahans-L)"
  11
  12 config CPU_PXA310
  13         bool "PXA310 (codename Monahans-LV)"
  14         select CPU_PXA300
  15
  16 config CPU_PXA320
  17         bool "PXA320 (codename Monahans-P)"
  18
  19 config CPU_PXA930
  20         bool "PXA930 (codename Tavor-P)"
  21
  22 config CPU_PXA935
  23         bool "PXA935 (codename Tavor-P65)"
  24
  25 endmenu
  26
  27 endif
  28
  29 config ARCH_GUMSTIX
  30         bool "Gumstix XScale 255 boards"
  31         select PXA25x
  32         help
  33           Say Y here if you intend to run this kernel on
  34           Basix, Connex, ws-200ax, ws-400ax systems
  35
  36 choice
  37         prompt "Gumstix Carrier/Expansion Board"
  38         depends on ARCH_GUMSTIX
  39
  40 config GUMSTIX_AM200EPD
  41         bool "Enable AM200EPD board support"
  42
  43 config GUMSTIX_AM300EPD
  44         bool "Enable AM300EPD board support"
  45
  46 endchoice
  47
  48 config MACH_INTELMOTE2
  49         bool "Intel Mote 2 Platform"
  50         select PXA27x
  51         select IWMMXT
  52         select PXA_HAVE_BOARD_IRQS
  53
  54 config MACH_STARGATE2
  55         bool "Intel Stargate 2 Platform"
  56         select PXA27x
  57         select IWMMXT
  58         select PXA_HAVE_BOARD_IRQS
  59
  60 config ARCH_LUBBOCK
  61         bool "Intel DBPXA250 Development Platform"
  62         select PXA25x
  63         select SA1111
  64         select PXA_HAVE_BOARD_IRQS
  65
  66 config MACH_LOGICPD_PXA270
  67         bool "LogicPD PXA270 Card Engine Development Platform"
  68         select PXA27x
  69         select HAVE_PWM
  70         select PXA_HAVE_BOARD_IRQS
  71
  72 config MACH_MAINSTONE
  73         bool "Intel HCDDBBVA0 Development Platform"
  74         select PXA27x
  75         select HAVE_PWM
  76         select PXA_HAVE_BOARD_IRQS
  77
  78 config MACH_MP900C
  79         bool "Nec Mobilepro 900/c"
  80         select PXA25x
  81
  82 config ARCH_PXA_IDP
  83         bool "Accelent Xscale IDP"
  84         select PXA25x
  85
  86 config PXA_SHARPSL
  87         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
  88         select SHARP_SCOOP
  89         select SHARP_PARAM
  90         help
  91           Say Y here if you intend to run this kernel on a
  92           Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
  93           SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
  94           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
  95           handheld computer.
  96
  97 config SHARPSL_PM
  98         bool
  99         select APM_EMULATION
 100
 101 config CORGI_SSP_DEPRECATED
 102         bool
 103         select PXA_SSP
 104         help
 105           This option will include corgi_ssp.c and corgi_lcd.c
 106           that corgi_ts.c and other legacy drivers (corgi_bl.c
 107           and sharpsl_pm.c) may depend on.
 108
 109 config MACH_POODLE
 110         bool "Enable Sharp SL-5600 (Poodle) Support"
 111         depends on PXA_SHARPSL
 112         select PXA25x
 113         select SHARP_LOCOMO
 114         select PXA_SSP
 115
 116 config MACH_CORGI
 117         bool "Enable Sharp SL-C700 (Corgi) Support"
 118         depends on PXA_SHARPSL
 119         select PXA25x
 120         select PXA_SHARP_C7xx
 121
 122 config MACH_SHEPHERD
 123         bool "Enable Sharp SL-C750 (Shepherd) Support"
 124         depends on PXA_SHARPSL
 125         select PXA25x
 126         select PXA_SHARP_C7xx
 127
 128 config MACH_HUSKY
 129         bool "Enable Sharp SL-C760 (Husky) Support"
 130         depends on PXA_SHARPSL
 131         select PXA25x
 132         select PXA_SHARP_C7xx
 133
 134 config MACH_AKITA
 135         bool "Enable Sharp SL-1000 (Akita) Support"
 136         depends on PXA_SHARPSL
 137         select PXA27x
 138         select PXA_SHARP_Cxx00
 139         select MACH_SPITZ
 140         select I2C
 141         select I2C_PXA
 142
 143 config MACH_SPITZ
 144         bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 145         depends on PXA_SHARPSL
 146         select PXA27x
 147         select PXA_SHARP_Cxx00
 148
 149 config MACH_BORZOI
 150         bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
 151         depends on PXA_SHARPSL
 152         select PXA27x
 153         select PXA_SHARP_Cxx00
 154
 155 config MACH_TOSA
 156         bool "Enable Sharp SL-6000x (Tosa) Support"
 157         depends on PXA_SHARPSL
 158         select PXA25x
 159         select PXA_HAVE_BOARD_IRQS
 160
 161 config ARCH_VIPER
 162         bool "Arcom/Eurotech VIPER SBC"
 163         select PXA25x
 164         select ISA
 165         select I2C_GPIO
 166         select HAVE_PWM
 167         select PXA_HAVE_BOARD_IRQS
 168         select PXA_HAVE_ISA_IRQS
 169
 170 config ARCH_PXA_ESERIES
 171         bool "PXA based Toshiba e-series PDAs"
 172         select PXA25x
 173         select PXA_HAVE_BOARD_IRQS
 174
 175 config MACH_E330
 176         bool "Toshiba e330"
 177         default y
 178         depends on ARCH_PXA_ESERIES
 179         help
 180           Say Y here if you intend to run this kernel on a Toshiba
 181           e330 family PDA.
 182
 183 config MACH_E350
 184         bool "Toshiba e350"
 185         default y
 186         depends on ARCH_PXA_ESERIES
 187         help
 188           Say Y here if you intend to run this kernel on a Toshiba
 189           e350 family PDA.
 190
 191 config MACH_E740
 192         bool "Toshiba e740"
 193         default y
 194         depends on ARCH_PXA_ESERIES
 195         select FB_W100
 196         help
 197           Say Y here if you intend to run this kernel on a Toshiba
 198           e740 family PDA.
 199
 200 config MACH_E750
 201         bool "Toshiba e750"
 202         default y
 203         depends on ARCH_PXA_ESERIES
 204         select FB_W100
 205         help
 206           Say Y here if you intend to run this kernel on a Toshiba
 207           e750 family PDA.
 208
 209 config MACH_E400
 210         bool "Toshiba e400"
 211         default y
 212         depends on ARCH_PXA_ESERIES
 213         help
 214           Say Y here if you intend to run this kernel on a Toshiba
 215           e400 family PDA.
 216
 217 config MACH_E800
 218         bool "Toshiba e800"
 219         default y
 220         depends on ARCH_PXA_ESERIES
 221         select FB_W100
 222         help
 223           Say Y here if you intend to run this kernel on a Toshiba
 224           e800 family PDA.
 225
 226 config TRIZEPS_PXA
 227         bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 228
 229 config MACH_H5000
 230         bool "HP iPAQ h5000"
 231         select PXA25x
 232
 233 config MACH_TRIZEPS4
 234         bool "Keith und Koep Trizeps4 DIMM-Module"
 235         depends on TRIZEPS_PXA
 236         select TRIZEPS_PCMCIA
 237         select PXA27x
 238
 239 config MACH_TRIZEPS4WL
 240         bool "Keith und Koep Trizeps4-WL DIMM-Module"
 241         depends on TRIZEPS_PXA
 242         select TRIZEPS_PCMCIA
 243         select PXA27x
 244         select PXA_SSP
 245
 246 choice
 247         prompt "Select base board for Trizeps module"
 248         depends on TRIZEPS_PXA
 249
 250 config MACH_TRIZEPS_CONXS
 251         bool "ConXS Eval Board"
 252
 253 config MACH_TRIZEPS_UCONXS
 254         bool "uConXS Eval Board"
 255
 256 config MACH_TRIZEPS_ANY
 257         bool "another Board"
 258
 259 endchoice
 260
 261 config TRIZEPS_PCMCIA
 262         bool
 263         help
 264           Enable PCMCIA support for Trizeps modules
 265
 266 config MACH_EM_X270
 267         bool "CompuLab EM-x270 platform"
 268         select PXA27x
 269
 270 config MACH_EXEDA
 271         bool "CompuLab eXeda platform"
 272         select PXA27x
 273
 274 config MACH_COLIBRI
 275         bool "Toradex Colibri PXA270"
 276         select PXA27x
 277
 278 config MACH_COLIBRI300
 279         bool "Toradex Colibri PXA300/310"
 280         select PXA3xx
 281         select CPU_PXA300
 282
 283 config MACH_COLIBRI320
 284         bool "Toradex Colibri PXA320"
 285         select PXA3xx
 286         select CPU_PXA320
 287
 288 config MACH_ZYLONITE
 289         bool "PXA3xx Development Platform (aka Zylonite)"
 290         select PXA3xx
 291         select PXA_SSP
 292         select HAVE_PWM
 293         select PXA_HAVE_BOARD_IRQS
 294
 295 config MACH_LITTLETON
 296         bool "PXA3xx Form Factor Platform (aka Littleton)"
 297         select PXA3xx
 298         select PXA_SSP
 299
 300 config MACH_TAVOREVB
 301         bool "PXA930 Evaluation Board (aka TavorEVB)"
 302         select PXA3xx
 303         select CPU_PXA930
 304
 305 config MACH_SAAR
 306         bool "PXA930 Handheld Platform (aka SAAR)"
 307         select PXA3xx
 308         select CPU_PXA930
 309
 310 config MACH_ARMCORE
 311         bool "CompuLab CM-X255/CM-X270 modules"
 312         select PXA27x
 313         select IWMMXT
 314         select PXA25x
 315         select PXA_SSP
 316
 317 config MACH_CM_X300
 318         bool "CompuLab CM-X300 modules"
 319         select PXA3xx
 320         select CPU_PXA300
 321
 322 config MACH_H4700
 323         bool "HP iPAQ hx4700"
 324         select PXA27x
 325         select IWMMXT
 326         select PXA_SSP
 327         select HAVE_PWM
 328         select PXA_HAVE_BOARD_IRQS
 329
 330 config MACH_MAGICIAN
 331         bool "Enable HTC Magician Support"
 332         select PXA27x
 333         select IWMMXT
 334         select PXA_SSP
 335         select HAVE_PWM
 336         select PXA_HAVE_BOARD_IRQS
 337
 338 config MACH_HIMALAYA
 339         bool "HTC Himalaya Support"
 340         select CPU_PXA26x
 341         select FB_W100
 342
 343 config MACH_MIOA701
 344         bool "Mitac Mio A701 Support"
 345         select PXA27x
 346         select IWMMXT
 347         select HAVE_PWM
 348         select GPIO_SYSFS
 349         help
 350           Say Y here if you intend to run this kernel on a
 351           MIO A701. Currently there is only basic support
 352           for this PDA.
 353
 354 config MACH_PCM027
 355         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 356         select PXA27x
 357         select IWMMXT
 358         select PXA_SSP
 359         select PXA_HAVE_BOARD_IRQS
 360
 361 config ARCH_PXA_PALM
 362         bool "PXA based Palm PDAs"
 363         select HAVE_PWM
 364
 365 config MACH_PALMTE2
 366         bool "Palm Tungsten|E2"
 367         default y
 368         depends on ARCH_PXA_PALM
 369         select PXA25x
 370         help
 371           Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 372           handheld computer.
 373
 374 config MACH_PALMT5
 375         bool "Palm Tungsten|T5"
 376         default y
 377         depends on ARCH_PXA_PALM
 378         select PXA27x
 379         select IWMMXT
 380         help
 381           Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 382           handheld computer.
 383
 384 config MACH_PALMTX
 385         bool "Palm T|X"
 386         default y
 387         depends on ARCH_PXA_PALM
 388         select PXA27x
 389         select IWMMXT
 390         help
 391           Say Y here if you intend to run this kernel on a Palm T|X
 392           handheld computer.
 393
 394 config MACH_PALMZ72
 395         bool "Palm Zire 72"
 396         default y
 397         depends on ARCH_PXA_PALM
 398         select PXA27x
 399         select IWMMXT
 400         help
 401           Say Y here if you intend to run this kernel on Palm Zire 72
 402           handheld computer.
 403
 404 config MACH_TREO680
 405         bool "Palm Treo 680"
 406         default y
 407         depends on ARCH_PXA_PALM
 408         select PXA27x
 409         select IWMMXT
 410         help
 411           Say Y here if you intend to run this kernel on Palm Treo 680
 412           smartphone.
 413
 414 config MACH_PALMLD
 415         bool "Palm LifeDrive"
 416         default y
 417         depends on ARCH_PXA_PALM
 418         select PXA27x
 419         select IWMMXT
 420         help
 421           Say Y here if you intend to run this kernel on a Palm LifeDrive
 422           handheld computer.
 423
 424 config MACH_PCM990_BASEBOARD
 425         bool "PHYTEC PCM-990 development board"
 426         select HAVE_PWM
 427         depends on MACH_PCM027
 428
 429 choice
 430         prompt "display on pcm990"
 431         depends on MACH_PCM990_BASEBOARD
 432
 433 config PCM990_DISPLAY_SHARP
 434         bool "sharp lq084v1dg21 stn display"
 435
 436 config PCM990_DISPLAY_NEC
 437         bool "nec nl6448bc20_18d tft display"
 438
 439 config PCM990_DISPLAY_NONE
 440         bool "no display"
 441
 442 endchoice
 443
 444 config MACH_CSB726
 445         bool "Enable Cogent CSB726 System On a Module"
 446         select PXA27x
 447         select IWMMXT
 448         help
 449           Say Y here if you intend to run this kernel on a Cogent
 450           CSB726 System On Module.
 451
 452 config CSB726_CSB701
 453         bool "Enable supprot for CSB701 baseboard"
 454         depends on MACH_CSB726
 455
 456 config PXA_EZX
 457         bool "Motorola EZX Platform"
 458         select PXA27x
 459         select IWMMXT
 460         select HAVE_PWM
 461
 462 config MACH_EZX_A780
 463         bool "Motorola EZX A780"
 464         default y
 465         depends on PXA_EZX
 466
 467 config MACH_EZX_E680
 468         bool "Motorola EZX E680"
 469         default y
 470         depends on PXA_EZX
 471
 472 config MACH_EZX_A1200
 473         bool "Motorola EZX A1200"
 474         default y
 475         depends on PXA_EZX
 476
 477 config MACH_EZX_A910
 478         bool "Motorola EZX A910"
 479         default y
 480         depends on PXA_EZX
 481
 482 config MACH_EZX_E6
 483         bool "Motorola EZX E6"
 484         default y
 485         depends on PXA_EZX
 486
 487 config MACH_EZX_E2
 488         bool "Motorola EZX E2"
 489         default y
 490         depends on PXA_EZX
 491
 492 endmenu
 493
 494 config PXA25x
 495         bool
 496         select CPU_XSCALE
 497         help
 498           Select code specific to PXA21x/25x/26x variants
 499
 500 config PXA27x
 501         bool
 502         select CPU_XSCALE
 503         help
 504           Select code specific to PXA27x variants
 505
 506 config CPU_PXA26x
 507         bool
 508         select PXA25x
 509         help
 510           Select code specific to PXA26x (codename Dalhart)
 511
 512 config PXA3xx
 513         bool
 514         select CPU_XSC3
 515         help
 516           Select code specific to PXA3xx variants
 517
 518 config PXA_SHARP_C7xx
 519         bool
 520         select PXA_SSP
 521         select SHARPSL_PM
 522         help
 523           Enable support for all Sharp C7xx models
 524
 525 config PXA_SHARP_Cxx00
 526         bool
 527         select PXA_SSP
 528         select SHARPSL_PM
 529         help
 530           Enable common support for Sharp Cxx00 models
 531
 532 config PXA_SSP
 533         tristate
 534         help
 535           Enable support for PXA2xx SSP ports
 536
 537 config TOSA_BT
 538         tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 539         depends on MACH_TOSA
 540         select RFKILL
 541         help
 542           This is a simple driver that is able to control
 543           the state of built in bluetooth chip on tosa.
 544
 545 config PXA_HAVE_BOARD_IRQS
 546         bool
 547
 548 config PXA_HAVE_ISA_IRQS
 549         bool
 550
 551 endif