arch/arm/mach-pxa/Kconfig

   1 if ARCH_PXA
   2
   3 menu "Intel PXA2xx/PXA3xx Implementations"
   4
   5 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
   6
   7 config ARCH_LUBBOCK
   8         bool "Intel DBPXA250 Development Platform (aka Lubbock)"
   9         select PXA25x
  10         select SA1111
  11
  12 config MACH_MAINSTONE
  13         bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
  14         select PXA27x
  15         select HAVE_PWM
  16
  17 config MACH_ZYLONITE
  18         bool
  19         select PXA3xx
  20         select HAVE_PWM
  21
  22 config MACH_ZYLONITE300
  23         bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
  24         select CPU_PXA300
  25         select CPU_PXA310
  26         select MACH_ZYLONITE
  27
  28 config MACH_ZYLONITE320
  29         bool "PXA3xx Development Platform (aka Zylonite) PXA320"
  30         select CPU_PXA320
  31         select MACH_ZYLONITE
  32
  33 config MACH_LITTLETON
  34         bool "PXA3xx Form Factor Platform (aka Littleton)"
  35         select PXA3xx
  36         select CPU_PXA300
  37         select CPU_PXA310
  38
  39 config MACH_TAVOREVB
  40         bool "PXA930 Evaluation Board (aka TavorEVB)"
  41         select PXA3xx
  42         select CPU_PXA930
  43
  44 config MACH_TAVOREVB3
  45         bool "PXA95x Development Platform (aka TavorEVB III)"
  46         select CPU_PXA950
  47
  48 config MACH_SAAR
  49         bool "PXA930 Handheld Platform (aka SAAR)"
  50         select PXA3xx
  51         select CPU_PXA930
  52
  53 config MACH_SAARB
  54         bool "PXA955 Handheld Platform (aka SAARB)"
  55         select CPU_PXA955
  56
  57 comment "Third Party Dev Platforms (sorted by vendor name)"
  58
  59 config ARCH_PXA_IDP
  60         bool "Accelent Xscale IDP"
  61         select PXA25x
  62
  63 config ARCH_VIPER
  64         bool "Arcom/Eurotech VIPER SBC"
  65         select PXA25x
  66         select ISA
  67         select I2C_GPIO
  68         select HAVE_PWM
  69         select PXA_HAVE_ISA_IRQS
  70         select ARCOM_PCMCIA
  71
  72 config MACH_ARCOM_ZEUS
  73         bool "Arcom/Eurotech ZEUS SBC"
  74         select PXA27x
  75         select ISA
  76         select PXA_HAVE_ISA_IRQS
  77         select ARCOM_PCMCIA
  78
  79 config MACH_BALLOON3
  80         bool "Balloon 3 board"
  81         select PXA27x
  82         select IWMMXT
  83
  84 config MACH_CSB726
  85         bool "Enable Cogent CSB726 System On a Module"
  86         select PXA27x
  87         select IWMMXT
  88         help
  89           Say Y here if you intend to run this kernel on a Cogent
  90           CSB726 System On Module.
  91
  92 config CSB726_CSB701
  93         bool "Enable support for CSB701 baseboard"
  94         depends on MACH_CSB726
  95
  96 config MACH_ARMCORE
  97         bool "CompuLab CM-X255/CM-X270 modules"
  98         select PXA27x
  99         select IWMMXT
 100         select PXA25x
 101         select MIGHT_HAVE_PCI
 102
 103 config MACH_EM_X270
 104         bool "CompuLab EM-x270 platform"
 105         select PXA27x
 106
 107 config MACH_EXEDA
 108         bool "CompuLab eXeda platform"
 109         select PXA27x
 110
 111 config MACH_CM_X300
 112         bool "CompuLab CM-X300 modules"
 113         select PXA3xx
 114         select CPU_PXA300
 115         select CPU_PXA310
 116         select HAVE_PWM
 117
 118 config MACH_CAPC7117
 119         bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
 120         select CPU_PXA320
 121         select PXA3xx
 122
 123 config ARCH_GUMSTIX
 124         bool "Gumstix XScale 255 boards"
 125         select PXA25x
 126         help
 127           Say Y here if you intend to run this kernel on
 128           Basix, Connex, ws-200ax, ws-400ax systems
 129
 130 choice
 131         prompt "Gumstix Carrier/Expansion Board"
 132         depends on ARCH_GUMSTIX
 133
 134 config GUMSTIX_AM200EPD
 135         bool "Enable AM200EPD board support"
 136
 137 config GUMSTIX_AM300EPD
 138         bool "Enable AM300EPD board support"
 139
 140 endchoice
 141
 142 config MACH_INTELMOTE2
 143         bool "Intel Mote 2 Platform"
 144         select PXA27x
 145         select IWMMXT
 146
 147 config MACH_STARGATE2
 148         bool "Intel Stargate 2 Platform"
 149         select PXA27x
 150         select IWMMXT
 151
 152 config MACH_XCEP
 153         bool "Iskratel Electronics XCEP"
 154         select PXA25x
 155         select MTD
 156         select MTD_PHYSMAP
 157         select MTD_CFI_INTELEXT
 158         select MTD_CFI
 159         select MTD_CHAR
 160         select SMC91X
 161         help
 162           PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 163           Tuned for usage in Libera instruments for particle accelerators.
 164
 165 config TRIZEPS_PXA
 166         bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 167
 168 config MACH_TRIZEPS4
 169         bool "Keith und Koep Trizeps4 DIMM-Module"
 170         depends on TRIZEPS_PXA
 171         select TRIZEPS_PCMCIA
 172         select PXA27x
 173
 174 config MACH_TRIZEPS4WL
 175         bool "Keith und Koep Trizeps4-WL DIMM-Module"
 176         depends on TRIZEPS_PXA
 177         select TRIZEPS_PCMCIA
 178         select PXA27x
 179
 180 choice
 181         prompt "Select base board for Trizeps module"
 182         depends on TRIZEPS_PXA
 183
 184 config MACH_TRIZEPS_CONXS
 185         bool "ConXS Eval Board"
 186
 187 config MACH_TRIZEPS_UCONXS
 188         bool "uConXS Eval Board"
 189
 190 config MACH_TRIZEPS_ANY
 191         bool "another Board"
 192
 193 endchoice
 194
 195 config ARCOM_PCMCIA
 196         bool
 197         help
 198           Generic option for Arcom Viper/Zeus PCMCIA
 199
 200 config TRIZEPS_PCMCIA
 201         bool
 202         help
 203           Enable PCMCIA support for Trizeps modules
 204
 205 config MACH_LOGICPD_PXA270
 206         bool "LogicPD PXA270 Card Engine Development Platform"
 207         select PXA27x
 208         select HAVE_PWM
 209
 210 config MACH_PCM027
 211         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 212         select PXA27x
 213         select IWMMXT
 214
 215 config MACH_PCM990_BASEBOARD
 216         bool "PHYTEC PCM-990 development board"
 217         select HAVE_PWM
 218         depends on MACH_PCM027
 219
 220 choice
 221         prompt "display on pcm990"
 222         depends on MACH_PCM990_BASEBOARD
 223
 224 config PCM990_DISPLAY_SHARP
 225         bool "sharp lq084v1dg21 stn display"
 226
 227 config PCM990_DISPLAY_NEC
 228         bool "nec nl6448bc20_18d tft display"
 229
 230 config PCM990_DISPLAY_NONE
 231         bool "no display"
 232
 233 endchoice
 234
 235 config MACH_COLIBRI
 236         bool "Toradex Colibri PXA270"
 237         select PXA27x
 238
 239 config MACH_COLIBRI_PXA270_INCOME
 240         bool "Income s.r.o. PXA270 SBC"
 241         depends on MACH_COLIBRI
 242         select PXA27x
 243         select HAVE_PWM
 244
 245 config MACH_COLIBRI300
 246         bool "Toradex Colibri PXA300/310"
 247         select PXA3xx
 248         select CPU_PXA300
 249         select CPU_PXA310
 250
 251 config MACH_COLIBRI320
 252         bool "Toradex Colibri PXA320"
 253         select PXA3xx
 254         select CPU_PXA320
 255
 256 config MACH_COLIBRI_EVALBOARD
 257         bool "Toradex Colibri Evaluation Carrier Board support"
 258         depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
 259
 260 config MACH_VPAC270
 261         bool "Voipac PXA270"
 262         select PXA27x
 263         select HAVE_PATA_PLATFORM
 264         help
 265           PXA270 based Single Board Computer.
 266
 267 comment "End-user Products (sorted by vendor name)"
 268
 269 config MACH_H4700
 270         bool "HP iPAQ hx4700"
 271         select PXA27x
 272         select IWMMXT
 273         select HAVE_PWM
 274
 275 config MACH_H5000
 276         bool "HP iPAQ h5000"
 277         select PXA25x
 278
 279 config MACH_HIMALAYA
 280         bool "HTC Himalaya Support"
 281         select CPU_PXA26x
 282
 283 config MACH_MAGICIAN
 284         bool "Enable HTC Magician Support"
 285         select PXA27x
 286         select IWMMXT
 287         select HAVE_PWM
 288
 289 config MACH_MIOA701
 290         bool "Mitac Mio A701 Support"
 291         select PXA27x
 292         select IWMMXT
 293         select HAVE_PWM
 294         select GPIO_SYSFS
 295         help
 296           Say Y here if you intend to run this kernel on a
 297           MIO A701. Currently there is only basic support
 298           for this PDA.
 299
 300 config PXA_EZX
 301         bool "Motorola EZX Platform"
 302         select PXA27x
 303         select IWMMXT
 304         select HAVE_PWM
 305
 306 config MACH_EZX_A780
 307         bool "Motorola EZX A780"
 308         default y
 309         depends on PXA_EZX
 310
 311 config MACH_EZX_E680
 312         bool "Motorola EZX E680"
 313         default y
 314         depends on PXA_EZX
 315
 316 config MACH_EZX_A1200
 317         bool "Motorola EZX A1200"
 318         default y
 319         depends on PXA_EZX
 320
 321 config MACH_EZX_A910
 322         bool "Motorola EZX A910"
 323         default y
 324         depends on PXA_EZX
 325
 326 config MACH_EZX_E6
 327         bool "Motorola EZX E6"
 328         default y
 329         depends on PXA_EZX
 330
 331 config MACH_EZX_E2
 332         bool "Motorola EZX E2"
 333         default y
 334         depends on PXA_EZX
 335
 336 config MACH_MP900C
 337         bool "Nec Mobilepro 900/c"
 338         select PXA25x
 339
 340 config ARCH_PXA_PALM
 341         bool "PXA based Palm PDAs"
 342         select HAVE_PWM
 343
 344 config MACH_PALM27X
 345         bool
 346
 347 config MACH_PALMTE2
 348         bool "Palm Tungsten|E2"
 349         default y
 350         depends on ARCH_PXA_PALM
 351         select PXA25x
 352         help
 353           Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 354           handheld computer.
 355
 356 config MACH_PALMTC
 357         bool "Palm Tungsten|C"
 358         default y
 359         depends on ARCH_PXA_PALM
 360         select PXA25x
 361         help
 362           Say Y here if you intend to run this kernel on a Palm Tungsten|C
 363           handheld computer.
 364
 365 config MACH_PALMT5
 366         bool "Palm Tungsten|T5"
 367         default y
 368         depends on ARCH_PXA_PALM
 369         select PXA27x
 370         select IWMMXT
 371         select MACH_PALM27X
 372         help
 373           Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 374           handheld computer.
 375
 376 config MACH_PALMTX
 377         bool "Palm T|X"
 378         default y
 379         depends on ARCH_PXA_PALM
 380         select PXA27x
 381         select IWMMXT
 382         select MACH_PALM27X
 383         help
 384           Say Y here if you intend to run this kernel on a Palm T|X
 385           handheld computer.
 386
 387 config MACH_PALMZ72
 388         bool "Palm Zire 72"
 389         default y
 390         depends on ARCH_PXA_PALM
 391         select PXA27x
 392         select IWMMXT
 393         select MACH_PALM27X
 394         help
 395           Say Y here if you intend to run this kernel on Palm Zire 72
 396           handheld computer.
 397
 398 config MACH_PALMLD
 399         bool "Palm LifeDrive"
 400         default y
 401         depends on ARCH_PXA_PALM
 402         select PXA27x
 403         select IWMMXT
 404         select MACH_PALM27X
 405         help
 406           Say Y here if you intend to run this kernel on a Palm LifeDrive
 407           handheld computer.
 408
 409 config PALM_TREO
 410         bool
 411         depends on ARCH_PXA_PALM
 412
 413 config MACH_CENTRO
 414         bool "Palm Centro 685 (GSM)"
 415         default y
 416         depends on ARCH_PXA_PALM
 417         select PXA27x
 418         select IWMMXT
 419         select PALM_TREO
 420         help
 421           Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 422           smartphone.
 423
 424 config MACH_TREO680
 425         bool "Palm Treo 680"
 426         default y
 427         depends on ARCH_PXA_PALM
 428         select PXA27x
 429         select IWMMXT
 430         select PALM_TREO
 431         help
 432           Say Y here if you intend to run this kernel on Palm Treo 680
 433           smartphone.
 434
 435 config MACH_RAUMFELD_RC
 436         bool "Raumfeld Controller"
 437         select PXA3xx
 438         select CPU_PXA300
 439         select HAVE_PWM
 440
 441 config MACH_RAUMFELD_CONNECTOR
 442         bool "Raumfeld Connector"
 443         select PXA3xx
 444         select CPU_PXA300
 445
 446 config MACH_RAUMFELD_SPEAKER
 447         bool "Raumfeld Speaker"
 448         select PXA3xx
 449         select CPU_PXA300
 450
 451 config PXA_SHARPSL
 452         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 453         select SHARP_SCOOP
 454         select SHARP_PARAM
 455         help
 456           Say Y here if you intend to run this kernel on a
 457           Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
 458           SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
 459           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 460           handheld computer.
 461
 462 config PXA_SHARPSL_DETECT_MACH_ID
 463         bool "Detect machine ID at run-time in the decompressor"
 464         depends on PXA_SHARPSL
 465         help
 466           Say Y here if you want the zImage decompressor to detect
 467           the Zaurus machine ID at run-time. For latest kexec-based
 468           boot loader, this is not necessary.
 469
 470 config MACH_POODLE
 471         bool "Enable Sharp SL-5600 (Poodle) Support"
 472         depends on PXA_SHARPSL
 473         select PXA25x
 474         select SHARP_LOCOMO
 475
 476 config MACH_CORGI
 477         bool "Enable Sharp SL-C700 (Corgi) Support"
 478         depends on PXA_SHARPSL
 479         select PXA25x
 480         select PXA_SHARP_C7xx
 481
 482 config MACH_SHEPHERD
 483         bool "Enable Sharp SL-C750 (Shepherd) Support"
 484         depends on PXA_SHARPSL
 485         select PXA25x
 486         select PXA_SHARP_C7xx
 487
 488 config MACH_HUSKY
 489         bool "Enable Sharp SL-C760 (Husky) Support"
 490         depends on PXA_SHARPSL
 491         select PXA25x
 492         select PXA_SHARP_C7xx
 493
 494 config MACH_AKITA
 495         bool "Enable Sharp SL-1000 (Akita) Support"
 496         depends on PXA_SHARPSL
 497         select PXA27x
 498         select PXA_SHARP_Cxx00
 499         select MACH_SPITZ
 500         select I2C
 501         select I2C_PXA
 502
 503 config MACH_SPITZ
 504         bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 505         depends on PXA_SHARPSL
 506         select PXA27x
 507         select PXA_SHARP_Cxx00
 508
 509 config MACH_BORZOI
 510         bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
 511         depends on PXA_SHARPSL
 512         select PXA27x
 513         select PXA_SHARP_Cxx00
 514
 515 config MACH_TOSA
 516         bool "Enable Sharp SL-6000x (Tosa) Support"
 517         depends on PXA_SHARPSL
 518         select PXA25x
 519
 520 config TOSA_BT
 521         tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 522         depends on MACH_TOSA
 523         select RFKILL
 524         help
 525           This is a simple driver that is able to control
 526           the state of built in bluetooth chip on tosa.
 527
 528 config TOSA_USE_EXT_KEYCODES
 529         bool "Tosa keyboard: use extended keycodes"
 530         depends on MACH_TOSA
 531         default n
 532         help
 533           Say Y here to enable the tosa keyboard driver to generate extended
 534           (>= 127) keycodes. Be aware, that they can't be correctly interpreted
 535           by either console keyboard driver or by Kdrive keybd driver.
 536
 537           Say Y only if you know, what you are doing!
 538
 539 config MACH_ICONTROL
 540         bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
 541         select CPU_PXA320
 542         select PXA3xx
 543
 544 config ARCH_PXA_ESERIES
 545         bool "PXA based Toshiba e-series PDAs"
 546         select PXA25x
 547         select FB_W100
 548
 549 config MACH_E330
 550         bool "Toshiba e330"
 551         default y
 552         depends on ARCH_PXA_ESERIES
 553         help
 554           Say Y here if you intend to run this kernel on a Toshiba
 555           e330 family PDA.
 556
 557 config MACH_E350
 558         bool "Toshiba e350"
 559         default y
 560         depends on ARCH_PXA_ESERIES
 561         help
 562           Say Y here if you intend to run this kernel on a Toshiba
 563           e350 family PDA.
 564
 565 config MACH_E740
 566         bool "Toshiba e740"
 567         default y
 568         depends on ARCH_PXA_ESERIES
 569         help
 570           Say Y here if you intend to run this kernel on a Toshiba
 571           e740 family PDA.
 572
 573 config MACH_E750
 574         bool "Toshiba e750"
 575         default y
 576         depends on ARCH_PXA_ESERIES
 577         help
 578           Say Y here if you intend to run this kernel on a Toshiba
 579           e750 family PDA.
 580
 581 config MACH_E400
 582         bool "Toshiba e400"
 583         default y
 584         depends on ARCH_PXA_ESERIES
 585         help
 586           Say Y here if you intend to run this kernel on a Toshiba
 587           e400 family PDA.
 588
 589 config MACH_E800
 590         bool "Toshiba e800"
 591         default y
 592         depends on ARCH_PXA_ESERIES
 593         help
 594           Say Y here if you intend to run this kernel on a Toshiba
 595           e800 family PDA.
 596
 597 config MACH_ZIPIT2
 598         bool "Zipit Z2 Handheld"
 599         select PXA27x
 600         select HAVE_PWM
 601
 602 endmenu
 603
 604 config PXA25x
 605         bool
 606         select CPU_XSCALE
 607         help
 608           Select code specific to PXA21x/25x/26x variants
 609
 610 config PXA27x
 611         bool
 612         select CPU_XSCALE
 613         help
 614           Select code specific to PXA27x variants
 615
 616 config CPU_PXA26x
 617         bool
 618         select PXA25x
 619         help
 620           Select code specific to PXA26x (codename Dalhart)
 621
 622 config PXA3xx
 623         bool
 624         select CPU_XSC3
 625         help
 626           Select code specific to PXA3xx variants
 627
 628 config CPU_PXA300
 629         bool
 630         select PXA3xx
 631         help
 632           PXA300 (codename Monahans-L)
 633
 634 config CPU_PXA310
 635         bool
 636         select CPU_PXA300
 637         select PXA310_ULPI if USB_ULPI
 638         help
 639           PXA310 (codename Monahans-LV)
 640
 641 config CPU_PXA320
 642         bool
 643         select PXA3xx
 644         help
 645           PXA320 (codename Monahans-P)
 646
 647 config CPU_PXA930
 648         bool
 649         select PXA3xx
 650         help
 651           PXA930 (codename Tavor-P)
 652
 653 config CPU_PXA935
 654         bool
 655         select CPU_PXA930
 656         help
 657           PXA935 (codename Tavor-P65)
 658
 659 config PXA95x
 660         bool
 661         select CPU_PJ4
 662         help
 663           Select code specific to PXA95x variants
 664
 665 config CPU_PXA955
 666         bool
 667         select PXA95x
 668         help
 669           PXA950 (codename MG1)
 670
 671 config PXA_SHARP_C7xx
 672         bool
 673         select SHARPSL_PM
 674         help
 675           Enable support for all Sharp C7xx models
 676
 677 config PXA_SHARP_Cxx00
 678         bool
 679         select SHARPSL_PM
 680         help
 681           Enable common support for Sharp Cxx00 models
 682
 683 config SHARPSL_PM
 684         bool
 685         select APM_EMULATION
 686         select SHARPSL_PM_MAX1111
 687
 688 config SHARPSL_PM_MAX1111
 689         bool
 690         select HWMON
 691         select SENSORS_MAX1111
 692
 693 config PXA_HAVE_ISA_IRQS
 694         bool
 695
 696 config PXA310_ULPI
 697         bool
 698
 699 endif