arch/arm/mach-pxa/Kconfig

   1 if ARCH_PXA
   2
   3 menu "Intel PXA2xx/PXA3xx Implementations"
   4
   5 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
   6
   7 config MACH_PXA3XX_DT
   8         bool "Support PXA3xx platforms from device tree"
   9         select CPU_PXA300
  10         select POWER_SUPPLY
  11         select PXA3xx
  12         select USE_OF
  13         help
  14           Include support for Marvell PXA3xx based platforms using
  15           the device tree. Needn't select any other machine while
  16           MACH_PXA3XX_DT is enabled.
  17
  18 config ARCH_LUBBOCK
  19         bool "Intel DBPXA250 Development Platform (aka Lubbock)"
  20         select PXA25x
  21         select SA1111
  22
  23 config MACH_MAINSTONE
  24         bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
  25         select PXA27x
  26
  27 config MACH_ZYLONITE
  28         bool
  29         select PXA3xx
  30
  31 config MACH_ZYLONITE300
  32         bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
  33         select CPU_PXA300
  34         select CPU_PXA310
  35         select MACH_ZYLONITE
  36
  37 config MACH_ZYLONITE320
  38         bool "PXA3xx Development Platform (aka Zylonite) PXA320"
  39         select CPU_PXA320
  40         select MACH_ZYLONITE
  41
  42 config MACH_LITTLETON
  43         bool "PXA3xx Form Factor Platform (aka Littleton)"
  44         select CPU_PXA300
  45         select CPU_PXA310
  46         select PXA3xx
  47
  48 config MACH_TAVOREVB
  49         bool "PXA930 Evaluation Board (aka TavorEVB)"
  50         select CPU_PXA930
  51         select CPU_PXA935
  52         select PXA3xx
  53         select FB
  54         select FB_PXA
  55
  56 config MACH_SAAR
  57         bool "PXA930 Handheld Platform (aka SAAR)"
  58         select CPU_PXA930
  59         select CPU_PXA935
  60         select PXA3xx
  61         select FB
  62         select FB_PXA
  63
  64 comment "Third Party Dev Platforms (sorted by vendor name)"
  65
  66 config ARCH_PXA_IDP
  67         bool "Accelent Xscale IDP"
  68         select PXA25x
  69
  70 config ARCH_VIPER
  71         bool "Arcom/Eurotech VIPER SBC"
  72         select ARCOM_PCMCIA
  73         select I2C_GPIO if I2C=y
  74         select ISA
  75         select PXA25x
  76         select PXA_HAVE_ISA_IRQS
  77
  78 config MACH_ARCOM_ZEUS
  79         bool "Arcom/Eurotech ZEUS SBC"
  80         select ARCOM_PCMCIA
  81         select ISA
  82         select PXA27x
  83         select PXA_HAVE_ISA_IRQS
  84
  85 config MACH_BALLOON3
  86         bool "Balloon 3 board"
  87         select IWMMXT
  88         select PXA27x
  89
  90 config MACH_CSB726
  91         bool "Enable Cogent CSB726 System On a Module"
  92         select IWMMXT
  93         select PXA27x
  94         help
  95           Say Y here if you intend to run this kernel on a Cogent
  96           CSB726 System On Module.
  97
  98 config CSB726_CSB701
  99         bool "Enable support for CSB701 baseboard"
 100         depends on MACH_CSB726
 101
 102 config MACH_ARMCORE
 103         bool "CompuLab CM-X255/CM-X270 modules"
 104         select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
 105         select IWMMXT
 106         select MIGHT_HAVE_PCI
 107         select NEED_MACH_IO_H if PCI
 108         select PXA25x
 109         select PXA27x
 110
 111 config MACH_EM_X270
 112         bool "CompuLab EM-x270 platform"
 113         select PXA27x
 114
 115 config MACH_EXEDA
 116         bool "CompuLab eXeda platform"
 117         select PXA27x
 118
 119 config MACH_CM_X300
 120         bool "CompuLab CM-X300 modules"
 121         select CPU_PXA300
 122         select CPU_PXA310
 123         select PXA3xx
 124
 125 config MACH_CAPC7117
 126         bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
 127         select CPU_PXA320
 128         select PXA3xx
 129
 130 config ARCH_GUMSTIX
 131         bool "Gumstix XScale 255 boards"
 132         select PXA25x
 133         help
 134           Say Y here if you intend to run this kernel on
 135           Basix, Connex, ws-200ax, ws-400ax systems
 136
 137 choice
 138         prompt "Gumstix Carrier/Expansion Board"
 139         depends on ARCH_GUMSTIX
 140
 141 config GUMSTIX_AM200EPD
 142         bool "Enable AM200EPD board support"
 143
 144 config GUMSTIX_AM300EPD
 145         bool "Enable AM300EPD board support"
 146
 147 endchoice
 148
 149 config MACH_INTELMOTE2
 150         bool "Intel Mote 2 Platform"
 151         select IWMMXT
 152         select PXA27x
 153
 154 config MACH_STARGATE2
 155         bool "Intel Stargate 2 Platform"
 156         select IWMMXT
 157         select PXA27x
 158
 159 config MACH_XCEP
 160         bool "Iskratel Electronics XCEP"
 161         select MTD
 162         select MTD_CFI
 163         select MTD_CFI_INTELEXT
 164         select MTD_PHYSMAP
 165         select PXA25x
 166         help
 167           PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 168           Tuned for usage in Libera instruments for particle accelerators.
 169
 170 config TRIZEPS_PXA
 171         bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 172
 173 config MACH_TRIZEPS4
 174         bool "Keith und Koep Trizeps4 DIMM-Module"
 175         depends on TRIZEPS_PXA
 176         select PXA27x
 177         select TRIZEPS_PCMCIA
 178
 179 config MACH_TRIZEPS4WL
 180         bool "Keith und Koep Trizeps4-WL DIMM-Module"
 181         depends on TRIZEPS_PXA
 182         select MACH_TRIZEPS4
 183         select PXA27x
 184         select TRIZEPS_PCMCIA
 185
 186 choice
 187         prompt "Select base board for Trizeps module"
 188         depends on TRIZEPS_PXA
 189
 190 config MACH_TRIZEPS_CONXS
 191         bool "ConXS Eval Board"
 192
 193 config MACH_TRIZEPS_UCONXS
 194         bool "uConXS Eval Board"
 195
 196 config MACH_TRIZEPS_ANY
 197         bool "another Board"
 198
 199 endchoice
 200
 201 config ARCOM_PCMCIA
 202         bool
 203         help
 204           Generic option for Arcom Viper/Zeus PCMCIA
 205
 206 config TRIZEPS_PCMCIA
 207         bool
 208         help
 209           Enable PCMCIA support for Trizeps modules
 210
 211 config MACH_LOGICPD_PXA270
 212         bool "LogicPD PXA270 Card Engine Development Platform"
 213         select PXA27x
 214
 215 config MACH_PCM027
 216         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 217         select IWMMXT
 218         select PXA27x
 219
 220 config MACH_PCM990_BASEBOARD
 221         bool "PHYTEC PCM-990 development board"
 222         depends on MACH_PCM027
 223
 224 choice
 225         prompt "display on pcm990"
 226         depends on MACH_PCM990_BASEBOARD
 227
 228 config PCM990_DISPLAY_SHARP
 229         bool "sharp lq084v1dg21 stn display"
 230
 231 config PCM990_DISPLAY_NEC
 232         bool "nec nl6448bc20_18d tft display"
 233
 234 config PCM990_DISPLAY_NONE
 235         bool "no display"
 236
 237 endchoice
 238
 239 config MACH_COLIBRI
 240         bool "Toradex Colibri PXA270"
 241         select PXA27x
 242
 243 config MACH_COLIBRI_PXA270_INCOME
 244         bool "Income s.r.o. PXA270 SBC"
 245         depends on MACH_COLIBRI
 246         select PXA27x
 247
 248 config MACH_COLIBRI300
 249         bool "Toradex Colibri PXA300/310"
 250         select CPU_PXA300
 251         select CPU_PXA310
 252         select PXA3xx
 253
 254 config MACH_COLIBRI320
 255         bool "Toradex Colibri PXA320"
 256         select CPU_PXA320
 257         select PXA3xx
 258
 259 config MACH_COLIBRI_EVALBOARD
 260         bool "Toradex Colibri Evaluation Carrier Board support"
 261         depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
 262
 263 config MACH_VPAC270
 264         bool "Voipac PXA270"
 265         select HAVE_PATA_PLATFORM
 266         select PXA27x
 267         help
 268           PXA270 based Single Board Computer.
 269
 270 comment "End-user Products (sorted by vendor name)"
 271
 272 config MACH_H4700
 273         bool "HP iPAQ hx4700"
 274         select IWMMXT
 275         select PXA27x
 276
 277 config MACH_H5000
 278         bool "HP iPAQ h5000"
 279         select PXA25x
 280
 281 config MACH_HIMALAYA
 282         bool "HTC Himalaya Support"
 283         select CPU_PXA26x
 284
 285 config MACH_MAGICIAN
 286         bool "Enable HTC Magician Support"
 287         select IWMMXT
 288         select PXA27x
 289
 290 config MACH_MIOA701
 291         bool "Mitac Mio A701 Support"
 292         select GPIO_SYSFS
 293         select IWMMXT
 294         select PXA27x
 295         help
 296           Say Y here if you intend to run this kernel on a
 297           MIO A701. Currently there is only basic support
 298           for this PDA.
 299
 300 config PXA_EZX
 301         bool "Motorola EZX Platform"
 302         select IWMMXT
 303         select PXA27x
 304
 305 config MACH_EZX_A780
 306         bool "Motorola EZX A780"
 307         default y
 308         depends on PXA_EZX
 309
 310 config MACH_EZX_E680
 311         bool "Motorola EZX E680"
 312         default y
 313         depends on PXA_EZX
 314
 315 config MACH_EZX_A1200
 316         bool "Motorola EZX A1200"
 317         default y
 318         depends on PXA_EZX
 319
 320 config MACH_EZX_A910
 321         bool "Motorola EZX A910"
 322         default y
 323         depends on PXA_EZX
 324
 325 config MACH_EZX_E6
 326         bool "Motorola EZX E6"
 327         default y
 328         depends on PXA_EZX
 329
 330 config MACH_EZX_E2
 331         bool "Motorola EZX E2"
 332         default y
 333         depends on PXA_EZX
 334
 335 config MACH_MP900C
 336         bool "Nec Mobilepro 900/c"
 337         select PXA25x
 338
 339 config ARCH_PXA_PALM
 340         bool "PXA based Palm PDAs"
 341
 342 config MACH_PALM27X
 343         bool
 344
 345 config MACH_PALMTE2
 346         bool "Palm Tungsten|E2"
 347         default y
 348         depends on ARCH_PXA_PALM
 349         select PXA25x
 350         help
 351           Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 352           handheld computer.
 353
 354 config MACH_PALMTC
 355         bool "Palm Tungsten|C"
 356         default y
 357         depends on ARCH_PXA_PALM
 358         select PXA25x
 359         help
 360           Say Y here if you intend to run this kernel on a Palm Tungsten|C
 361           handheld computer.
 362
 363 config MACH_PALMT5
 364         bool "Palm Tungsten|T5"
 365         default y
 366         depends on ARCH_PXA_PALM
 367         select IWMMXT
 368         select MACH_PALM27X
 369         select PXA27x
 370         help
 371           Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 372           handheld computer.
 373
 374 config MACH_PALMTX
 375         bool "Palm T|X"
 376         default y
 377         depends on ARCH_PXA_PALM
 378         select IWMMXT
 379         select MACH_PALM27X
 380         select PXA27x
 381         help
 382           Say Y here if you intend to run this kernel on a Palm T|X
 383           handheld computer.
 384
 385 config MACH_PALMZ72
 386         bool "Palm Zire 72"
 387         default y
 388         depends on ARCH_PXA_PALM
 389         select IWMMXT
 390         select MACH_PALM27X
 391         select PXA27x
 392         help
 393           Say Y here if you intend to run this kernel on Palm Zire 72
 394           handheld computer.
 395
 396 config MACH_PALMLD
 397         bool "Palm LifeDrive"
 398         default y
 399         depends on ARCH_PXA_PALM
 400         select IWMMXT
 401         select MACH_PALM27X
 402         select PXA27x
 403         help
 404           Say Y here if you intend to run this kernel on a Palm LifeDrive
 405           handheld computer.
 406
 407 config PALM_TREO
 408         bool
 409         depends on ARCH_PXA_PALM
 410
 411 config MACH_CENTRO
 412         bool "Palm Centro 685 (GSM)"
 413         default y
 414         depends on ARCH_PXA_PALM
 415         select IWMMXT
 416         select MACH_PALM27X
 417         select PALM_TREO
 418         select PXA27x
 419         help
 420           Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 421           smartphone.
 422
 423 config MACH_TREO680
 424         bool "Palm Treo 680"
 425         default y
 426         depends on ARCH_PXA_PALM
 427         select IWMMXT
 428         select MACH_PALM27X
 429         select PALM_TREO
 430         select PXA27x
 431         help
 432           Say Y here if you intend to run this kernel on Palm Treo 680
 433           smartphone.
 434
 435 config MACH_RAUMFELD_RC
 436         bool "Raumfeld Controller"
 437         select CPU_PXA300
 438         select POWER_SUPPLY
 439         select PXA3xx
 440
 441 config MACH_RAUMFELD_CONNECTOR
 442         bool "Raumfeld Connector"
 443         select CPU_PXA300
 444         select POWER_SUPPLY
 445         select PXA3xx
 446
 447 config MACH_RAUMFELD_SPEAKER
 448         bool "Raumfeld Speaker"
 449         select CPU_PXA300
 450         select POWER_SUPPLY
 451         select PXA3xx
 452
 453 config PXA_SHARPSL
 454         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 455         select SHARP_PARAM
 456         select SHARP_SCOOP
 457         help
 458           Say Y here if you intend to run this kernel on a
 459           Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
 460           SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
 461           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 462           handheld computer.
 463
 464 config PXA_SHARPSL_DETECT_MACH_ID
 465         bool "Detect machine ID at run-time in the decompressor"
 466         depends on PXA_SHARPSL
 467         help
 468           Say Y here if you want the zImage decompressor to detect
 469           the Zaurus machine ID at run-time. For latest kexec-based
 470           boot loader, this is not necessary.
 471
 472 config MACH_POODLE
 473         bool "Enable Sharp SL-5600 (Poodle) Support"
 474         depends on PXA_SHARPSL
 475         select PXA25x
 476         select SHARP_LOCOMO
 477
 478 config MACH_CORGI
 479         bool "Enable Sharp SL-C700 (Corgi) Support"
 480         depends on PXA_SHARPSL
 481         select PXA25x
 482         select PXA_SHARP_C7xx
 483
 484 config MACH_SHEPHERD
 485         bool "Enable Sharp SL-C750 (Shepherd) Support"
 486         depends on PXA_SHARPSL
 487         select PXA25x
 488         select PXA_SHARP_C7xx
 489
 490 config MACH_HUSKY
 491         bool "Enable Sharp SL-C760 (Husky) Support"
 492         depends on PXA_SHARPSL
 493         select PXA25x
 494         select PXA_SHARP_C7xx
 495
 496 config MACH_AKITA
 497         bool "Enable Sharp SL-1000 (Akita) Support"
 498         depends on PXA_SHARPSL
 499         select I2C
 500         select I2C_PXA
 501         select MACH_SPITZ
 502         select PXA27x
 503         select PXA_SHARP_Cxx00
 504
 505 config MACH_SPITZ
 506         bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 507         depends on PXA_SHARPSL
 508         select PXA27x
 509         select PXA_SHARP_Cxx00
 510
 511 config MACH_BORZOI
 512         bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
 513         depends on PXA_SHARPSL
 514         select PXA27x
 515         select PXA_SHARP_Cxx00
 516
 517 config MACH_TOSA
 518         bool "Enable Sharp SL-6000x (Tosa) Support"
 519         depends on PXA_SHARPSL
 520         select PXA25x
 521
 522 config TOSA_BT
 523         tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 524         depends on MACH_TOSA
 525         select RFKILL
 526         help
 527           This is a simple driver that is able to control
 528           the state of built in bluetooth chip on tosa.
 529
 530 config TOSA_USE_EXT_KEYCODES
 531         bool "Tosa keyboard: use extended keycodes"
 532         depends on MACH_TOSA
 533         default n
 534         help
 535           Say Y here to enable the tosa keyboard driver to generate extended
 536           (>= 127) keycodes. Be aware, that they can't be correctly interpreted
 537           by either console keyboard driver or by Kdrive keybd driver.
 538
 539           Say Y only if you know, what you are doing!
 540
 541 config MACH_ICONTROL
 542         bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
 543         select CPU_PXA320
 544         select PXA3xx
 545
 546 config ARCH_PXA_ESERIES
 547         bool "PXA based Toshiba e-series PDAs"
 548         select FB_W100
 549         select PXA25x
 550
 551 config MACH_E330
 552         bool "Toshiba e330"
 553         default y
 554         depends on ARCH_PXA_ESERIES
 555         help
 556           Say Y here if you intend to run this kernel on a Toshiba
 557           e330 family PDA.
 558
 559 config MACH_E350
 560         bool "Toshiba e350"
 561         default y
 562         depends on ARCH_PXA_ESERIES
 563         help
 564           Say Y here if you intend to run this kernel on a Toshiba
 565           e350 family PDA.
 566
 567 config MACH_E740
 568         bool "Toshiba e740"
 569         default y
 570         depends on ARCH_PXA_ESERIES
 571         help
 572           Say Y here if you intend to run this kernel on a Toshiba
 573           e740 family PDA.
 574
 575 config MACH_E750
 576         bool "Toshiba e750"
 577         default y
 578         depends on ARCH_PXA_ESERIES
 579         help
 580           Say Y here if you intend to run this kernel on a Toshiba
 581           e750 family PDA.
 582
 583 config MACH_E400
 584         bool "Toshiba e400"
 585         default y
 586         depends on ARCH_PXA_ESERIES
 587         help
 588           Say Y here if you intend to run this kernel on a Toshiba
 589           e400 family PDA.
 590
 591 config MACH_E800
 592         bool "Toshiba e800"
 593         default y
 594         depends on ARCH_PXA_ESERIES
 595         help
 596           Say Y here if you intend to run this kernel on a Toshiba
 597           e800 family PDA.
 598
 599 config MACH_ZIPIT2
 600         bool "Zipit Z2 Handheld"
 601         select PXA27x
 602 endmenu
 603
 604 config PXA25x
 605         bool
 606         select CPU_XSCALE
 607         help
 608           Select code specific to PXA21x/25x/26x variants
 609
 610 config PXA27x
 611         bool
 612         select CPU_XSCALE
 613         help
 614           Select code specific to PXA27x variants
 615
 616 config CPU_PXA26x
 617         bool
 618         select PXA25x
 619         help
 620           Select code specific to PXA26x (codename Dalhart)
 621
 622 config PXA3xx
 623         bool
 624         select CPU_XSC3
 625         help
 626           Select code specific to PXA3xx variants
 627
 628 config CPU_PXA300
 629         bool
 630         select PXA3xx
 631         help
 632           PXA300 (codename Monahans-L)
 633
 634 config CPU_PXA310
 635         bool
 636         select CPU_PXA300
 637         select PXA310_ULPI if USB_ULPI
 638         help
 639           PXA310 (codename Monahans-LV)
 640
 641 config CPU_PXA320
 642         bool
 643         select PXA3xx
 644         help
 645           PXA320 (codename Monahans-P)
 646
 647 config CPU_PXA930
 648         bool
 649         select PXA3xx
 650         help
 651           PXA930 (codename Tavor-P)
 652
 653 config CPU_PXA935
 654         bool
 655         select CPU_PXA930
 656         help
 657           PXA935 (codename Tavor-P65)
 658
 659 config PXA_SHARP_C7xx
 660         bool
 661         select SHARPSL_PM
 662         help
 663           Enable support for all Sharp C7xx models
 664
 665 config PXA_SHARP_Cxx00
 666         bool
 667         select SHARPSL_PM
 668         help
 669           Enable common support for Sharp Cxx00 models
 670
 671 config SHARPSL_PM
 672         bool
 673         select APM_EMULATION
 674         select SHARPSL_PM_MAX1111
 675
 676 config SHARPSL_PM_MAX1111
 677         bool
 678         select HWMON
 679         select SENSORS_MAX1111
 680         select SPI
 681         select SPI_MASTER
 682
 683 config PXA_HAVE_ISA_IRQS
 684         bool
 685
 686 config PXA310_ULPI
 687         bool
 688
 689 endif